Eiki Projector Lc Xb250 User Manual

51
Power management
Time left before Lamp is off.
Power management
For  reducing  power  consumption  as  well  as  maintaining 
the  lamp  life,  the  Power  management  function  turns  off  the 
projection  lamp  when  the  projector  is  not  operated  for  a 
certain period.
Select one of the following options:
Ready ..................  When  the  lamp  has  been  fully  cooled 
down,  the  POWER  indicator  changes 
to  green  blinking.  In  this  condition,  the 
projection  lamp  will  be  turned...

52
Standby mode
This function is available when operating the projector via 
network.
 Eco ............  Select Eco when you do not use the projector 
via  network.  The  projector’s  network  function 
will stop when turning off the projector.
 Network ....  Supply the power to the network function even 
after turning off the projector. You can turn on/
off  the  projector  via  network,  modify  network 
environment,  and  receive  an  e-mail  about 
projector status while the projector is powered...

53
Closed caption
Closed caption is a function that displays the audio portion
of  a  TV  program  as  text  on  the  screen.  If  the  input  signal 
contains  closed  captions,  you  can  turn  on  the  feature  and 
switch  the  channels.  Press the  Point ▲▼  buttons  to  select 
Off, CC1, CC2, CC3 or CC4.  
If  the  closed  caption  is  not  clear,  you  can  change  the  text 
from Color to white.
Closed Caption
 Note:
The Closed caption is available only under the situation 
below.
  •	When	the...

54
Remote control
This function allows you to change brightness of the screen.
Lamp control 
Remote control
Lamp life control
This  projector  provides  two  different  remote  control  codes: 
the factory-set initial code (Code 1) and the secondary code 
(Code  2).  This  switching  function  prevents  remote  control 
interference  when  operating  several  projectors  or  video 
equipment at the same time.
When operating the projector in "Code 2", both the projector 
and the remote control...

55
Setting
Key lock
Key lockSecurity (Key lock and PIN code lock)
PIN code lock
This  function  locks  the  top  control  and  remote  control 
buttons to prevent operation by unauthorized persons.
Select Key  lock  and  then  press  the  SELECT  button, 
and  select  the  desired  item  by  pressing  the  Point 
▲▼buttons.
  .............Unlocked.
   .............Lock the operation of the top control. To 
unlock, use the remote control.
  .............Lock the operation of the remote control.    
To...

56
Use  the  Point ▲▼  buttons  to  select Off, On1,  or On2, 
and then press the SELECT button to make a choice.
Change the PIN code lock setting
Enter a PIN code
Use the Point  ▲▼ buttons to enter a number. Press the 
Point ► button to fix the number and move the red frame 
pointer  to  the  next  box.  The  number  changes  to  “”.  If 
you fixed an incorrect number, use the Point ◄ button to 
move the pointer to the number you want to correct, and 
then enter the correct number.
Repeat this step to...

57
Choose the running speed of cooling fans from the following options according to the ground elevation under which you use the projector. 
Off................ Normal speed. Set this function to Off when                       using the projector in non-high altitude                       environment. On 1............. Faster than Off mode. Select this mode                       when using the projector in high altitudes                       (about 1,200 meters or more above the sea...

58
Factory default
This function returns all setting values except for the PIN 
code lock, Logo PIN code lock, User logo, Filter counter 
and Total power savings to the factory default settings.
Factory defaultwarning log
This  function  records  anomalous  operations  while  the 
projector  is  in  operation  and  use  it  when  diagnosing  faults. 
Up  to  10  warning  logs  are  displayed  with  the  latest  warning 
message  at  the  top  of  the  list,  followed  by  previous  warning 
messages in...

59
Input Source Information Display
The Information Menu is used for checking the status of the image signal\
 being projected and the operation of the projector.
H-sync freq .
V-sync freq .
Lamp counter
Information Menu
The horizontal frequency of the input signal is displayed in 
KHz, or - - - - KHz when no signal.
The vertical frequency of the input signal is displayed in Hz, 
or - - - - Hz when no signal. Numbers of Hz doubles when 
during Interlace.
The cumulative lamp operating time is displayed....

60
The WARNING indicator shows the state of the function which protects the proj\
ector. Check the state of the 
WARNING indicator and the POWER indicator to take proper maintenance. 
wARNING indicator
The projector is shut down and the w ARNING 
indicator is blinking red .
When  the  temperature  inside  the  projector  reaches  a 
certain level, the projector will be automatically shut down to 
protect  the  inside  of  the  projector.  The  POWER  indicator  is 
blinking  while  the  projector  is...