Eiki Projector Lc Xb250 User Manual

21
How to Operate the On-Screen Menu
The  projector  can  be  adjusted  or  set  via  the  On-Screen 
Menu.  The  menus  have  a  hierarchical  structure,  with 
a  main  menu  that  is  divided  into  submenus,  which  are 
further  divided  into  other  submenus.  For  each  adjustment 
and  setting  procedure,  refer  to  respective  sections  in  this 
manual.
Use the Point ▲▼ buttons to highlight or select a main 
menu  item.  Press  the  Point ►  or the SELECT button 
to  access  the  submenu...

22
Main Menu
For detailed functions of each menu, see “Menu Tree” on pages 68-69.
Main MenuSub-Menu
 Image select
 For both of computer and Video sources, used to select an image mode from among Dynamic, Standard, Real, Cinema, 
Blackboard(Green), Colorboard and Image 1 - 4 (pp.33, 41). 
 Image adjust
 For computer source, used to adjust computer image [Contrast, Brightness, Color temp ., white balance (R/G/B), 
Sharpness and Gamma] (pp.34-35).
      For Video source, used to adjust picture image...

23
Rotate the Zoom Ring to zoom in and out.  
Rotate the Focus Ring to adjust the focus of the image.  
Zoom and Focus Adjustment
If  a  projected  picture  still  has  keystone  distortion  after 
pressing  the AUTO  SETUP  button  on  the  top  control  or  the 
AUTO  SET  button  on  the  remote  control,  correct  the  image 
manually as follows:
Press the KEYSTONE button on the remote control. The 
Keystone dialog box appears. Use the Point ▲▼ buttons to 
correct keystone distortion. The keystone...

24
Sound Adjustment
1
2
Press the MENU button to display the On-Screen Menu. 
Use  the  Point ▲▼  buttons  to  select Sound.  Press  the 
Point ►  button  or  the  SELECT  button  to  access  the 
submenu items. 
Press  the  VOLUME+/–  buttons  on  the  top  control  or  on  the 
remote  control  to  adjust  the  volume. The  volume  dialog  box 
appears on the screen for a few seconds.
Press  the  MUTE  button  on  the  remote  control  to  select On 
to  temporarily  turn  off  the  sound.  To  turn...

25
Remote Control Operation
Using the remote control for some frequently used operations is advisabl\
e. Just pressing one of the buttons 
enables you to make the desired operation quickly without calling up the\
 On-Screen Menu.
Press the COMPUTER 1/2, VIDEO, S-VIDEO and 
COMPONENT buttons on the remote control to select the 
input source. See pages 27-28, 38-39 for details.
COMPUTER 1/2, VIDEO, S-VIDEO and 
COMPONENT  buttons
Press  the  FREEZE  button  on  the  remote  control  to  freeze 
the...

26
black out → the captured image →	normal →	•	•	•	•	•
Press  the  NO  SHOW  button  on  the  remote  control  to  black 
out  the  image.  To  restore  to  normal,  press  the  NO  SHOW 
button  again  or  press  any  other  button.  When  the  projected 
image  is  captured  and  is  set  as  User  in  the  Logo  selection 
(p.  48),  the  screen  changes  each  time  you  press  the  NO 
SHOW button as follows.
NO SHOw button
Press  the  P-TIMER  button  on  the  remote  control  to  operate 
the...

27
Choose either Computer 1(RGB) or Computer 1(Scart) or Computer 2(An\
alog) by pressing the INPUT button
on the top control or press the COMPUTER 1 button or Computer 2 on the r\
emote control.
Before using INPUT button, correct input source should be selected through Menu operation \
as described
below.
1
Input Menu
2
3
Input Source Selection {(RGB: Computer 1/Computer 2(Analog)}
Computer Input 
COMPUTER 1 button
 Note:
   When the Input Search function is set to On1 or On2 in 
the Auto setup...

28
Choose Computer 2 (PC digital) or Computer 2 (AV HDCP) by pressing the INPUT button on the top control
or press the COMPUTER 2 button on the remote control.
Before using INPUT button, correct input source should be selected through Menu operation \
as described
below.
Input Source Selection {Computer2: RGB(PC digital), RGB(AV HDCP)}
 Note:
	 •	When  the  Input  Search  function  is  set  to On1  or On2, 
the input signal will be searched automatically (p.47).
	 •		HDCP (High-bandwidth Digital Content...

29
PC System Menu
PC System Menu
Computer System Selection
This projector automatically tunes to various types of computers with it\
s Multi-scan system and Auto PC 
Adjustment. If a computer is selected as a signal source, this projector\
 automatically detects the signal format 
and tunes to project a proper image without any additional settings. 
(Signal formats provided in this projector are shown on pages 71-72.)
One of the following messages may appear when:
W h e n   t h e   p r o j e c t o r   c...

30
Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal and Vertical 
to conform to your computer.
PC adjust Menu
Auto PC Adjustment
To store adjustment parameters
The  adjusted  parameters  from  the Auto  PC Adjustment  can 
be  stored  in  the  projector.  Once  the  parameters  are  stored, 
the  setting  can  be  done  just  by  selecting  a Mode  (1–10)  in 
the  PC  System  Menu  (see  page  29).  See  also  “Store”  on 
page 32.
 Note:
	 •	Fine sync,...