Eiki Projector Lc Xb250 User Manual

41
Image select Menu
Standard
Picture mode adjusted with fine tone.
Cinema
Image 1–4
Image Mode Selection 
Dynamic
Remote Control
IMAGE button
For viewing pictures in a bright room.
Normal picture mode preset on the projector.
For  viewing  with  the  user  preset  image  mode  in  the  Image 
Adjust  Menu  (see  pages  42–43).  This  Image  memory  is 
provided  in  each  computer,  component,  S-video  and  video 
input source.
1
2
Press the MENU button to display the On-Screen 
Menu. Use the Point ▲▼...

42
Image Adjustment
1
2
Press the Point ◄ button to decrease the contrast; press the 
Point ► button to increase the contrast (from 0 to 63).
Press  the  Point ◄  button  to  decrease  the  brightness;  press  
the Point ► button to increase the brightness (from 0 to 63).
Contrast
Brightness
Use the Point ◄► buttons to select the desired Color temp. 
level (XLow, Low, Mid or High). 
Color temp .
Press the Point ◄ button decrease the intensity of the color; 
press  the  Point ►	button  increase  the...

43
Use  the  Point ◄►  buttons  to  adjust  the  gamma  value  to 
obtain a better balance of contrast (from 0 to 15).
Gamma
Press  the  Point ◄  button  to  decrease  the  sharpness  of  the 
image;  press  the  Point ►  button  to  increase  the  sharpness 
of the image (from 0 to 15).
Sharpness
An  interlaced  video  signal  can  be  displayed  in  progressive 
mode. Select one of the following options.
 Off .........  Disabled.
 L1 ..........  For an active picture.
 L2 ..........  For a still...

44
This projector has the picture screen resize function, which enables you\
 to customize the image size.
Screen Size Adjustment
Screen Menu1
2
 Note:
	 •	When	no 	signal 	is 	detected, 	Normal  is  set 
automatically  and  the  Aspect  dialog  box 
disappears.
	 •	The	adjustable 	range 	for 	Scale  H/V  and 
Position  H/V  is  limited  depending  on  the 
input signal.
Press the MENU button to display the On-Screen 
Menu. Use the Point ▲▼ buttons to select Screen and 
then press the Point ► or the...

45
When this function is set to On, the picture will be top/bottom 
and  left/right  reversed.  This  function  is  used  to  project  the 
image from a ceiling-mounted projector.
Ceiling
When  this  function  is  set  to  On,  the  picture  will  be  left/right 
reversed.  This  function  is  used  to  project  the  image  from 
rear of the screen.
Rear
To  reset  the  adjusted  data,  select  Reset  and  press  the 
SELECT button. A confirmation box appears and then select 
Yes. All adjustments will...

46
Language
The language used in the On-Screen Menu is available in 
English,  German,  French,  Italian,  Spanish,  Portuguese, 
Dutch,  Swedish,  Finnish,  Polish,  Hungarian,  Romanian, 
Czech,  Russian,  Turkish,  Kazakh,  Vietnamese,  Chinese, 
Korean, japanese and Thai.
Setting Menu
Setting
Setting
Press  the  MENU  button  to  display  the  On-Screen 
Menu.  Press  the  Point ▲▼  buttons  to  select  the 
Setting  and  press  the  Point ►  or  the  SELECT  button 
to access the submenu items.
1...

47
 Note:
	 •	Auto  Keystone  corrects  vertical  distortion  only, 
not correct horizontal distortion.
	 •	The	Auto  Keystone  function  cannot  work  when 
the Ceiling  feature  is  set On  in  the  Setting  menu 
(pp.37, 45).
	 •	Perfect 	correction 	of 	the 	image 	distortion 	cannot	
be  ensured  with  the  Auto  setup  function.  If  the 
distortion  is  not  corrected  properly  by  pressing 
the  AUTO  SETUP  or  AUTO  SET  button,  adjust 
manually  by  pressing  the  KEYSTONE  button  on 
the...

48
Background
Select the background screen when no input signal is 
detected. Press the Point ▲▼ buttons to switch between 
each option.
 Blue ... Project a blue background
 User... Project an image captured in the Logo setting.
 Black . . Project a black background
This function decides whether to display On-Screen Displays.
 On ...........................  Show  all  the  On-Screen  displays. 
Use  this  function  when  you  want 
t o   p r o j e c t   i m a g e s   a f t e r   t h e   l a m p 
becomes...

49
Capture
Capture
This  function  enables  you  to  capture  an  image  being 
projected  to  use  it  for  a  starting-up  display  or  interval  of 
presentations.
Select Capture and press the SELECT button.  
A confirmation box appears and select yes to capture the 
projected image.
After  capturing  the  projected  image,  go  to  the  Logo  select 
function  and  set  it  to User. Then  the  captured  image  will  be 
displayed the next time you turn on the projector.
To cancel the capture...

50
Enter a Logo PIN code
Use  the  Point ▲▼	buttons  to  enter  a  number.  Press  the 
Point ► button to fix the number and move the red frame 
pointer  to  the  next  box.  The  number  changes  to  “”.  If 
you fixed an incorrect number, use the Point ◄ button to 
move the pointer to the number you want to correct, and 
then enter the correct number.
Repeat this step to complete entering a four-digit number.
After  entering  the  four-digit  number,  move  the  pointer  to 
Set.  Press  the  SELECT...