Eiki Projector Lc Xb23 User Manual

21
Basic Operation
Menu Bar
PC System Menu
Used to select
computer
system.  (p26)
Image Adjust Menu
Used to adjust
computer image. 
[Contrast / Brightness /
Color temp. / White
balance (R/G/B) /
Sharpness / Gamma]  
(p31, 32)
Setting Menu
Used to set the
projectors operating
configurations.
(p41-48)
Sound Menu
Used to adjust
the volume or
mute the sound.
(p23)
Image Select Menu
Used to select an image
level among Dynamic,
Standard, Real,
Blackboard(Green), and
Image 1 ~ 4.  (p30)
For computer source
AV...

22
Basic Operation
Rotate the Zoom Ring to zoom in and out.  
Rotate the Focus Ring to adjust the projected picture focus.  
Zoom Ring
(Rear)Focus Ring
(Front)
•The arrows are white when there is no correction.
•The direction of the arrow being corrected turns red.
•The arrows disappear at the maximum correction.
•If you press the KEYSTONE button on the top control
or on the remote control once more while the
keystone dialog box is being displayed, the keystone
adjustment will be canceled.
If a projected...

23
Basic Operation
Remote Control Operation
For some frequently used operations, using the remote control is advisable.
Just pressing one of the buttons enables you to make the operation, and no need for calling up the On-Screen
Menu.
✔Note:
•See the next page for the other buttons.
Press the FREEZE button on the remote control to freeze
the picture on the screen.  To cancel the Freeze function,
press the FREEZE button again or press any other button.  
FREEZE button
Press the COMPUTER or VIDEO button on...

24
Basic Operation
Remote Control
✔Note:
•See the previous page for the other buttons.
The message will disappear after 4 seconds.
P-Timer display
D.ZOOM
buttons
NO SHOW
button 
AUTO PC
button
KEYSTONE button  
(See p22)
POINT ed
buttons
LAMP CONTROL
button
P-TIMER button
IMAGE button
Volume +/-
buttons
(See p23)
black out ➜the captured image ➜normal ➜ • • • • •
Press the NO SHOW button on the remote control to black
out the image.  To restore to normal, press the NO SHOW
button again or press any other...

25
Choose either Computer 1 or Computer 2 by pressing the
INPUT button on the top control or press the COMPUTER
button on the remote control.
Before using these buttons, correct input source should be
selected through Menu operation as described below.
Press the MENU button to display the On-Screen
Menu.  Press the Point
7 8buttons to move the red
framed pointer to the Input Menu icon.1
Computer
1
Input Menu
Press the Point edbuttons to move the red arrow
pointer to either Computer 1 or Computer 2, and...

26
Computer Input
The Auto PC Adjustment
function operates to adjust 
the projector. 
PC System Menu
The PC System Menu icon 
Selected system is 
displayed.
Systems on this dialog box 
can be selected.
Press the MENU button to display the On-Screen
Menu.  Press the Point
7 8buttons to move the red
framed pointer to the PC System Menu icon.
Press the Point edbuttons to move the red arrow
pointer to the system that you want to set, and then
press the SELECT button.  
1
2
PC System Menu
Custom Mode (1~5)...

27
Computer Input
Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal, and Vertical to
conform to your computer.  Auto PC Adjustment function can be operated as follows.
Move the red framed
pointer to the Auto PC Adj.
item and press the SELECT
button.
Please wait... message
will appear while Auto PC
adjustment is in process.
PC Adjust Menu
PC Adjust Menu icon
To store adjustment parameters
Adjustment parameters from Auto PC Adjustment can be
memorized in this...

28
Computer Input
Press the MENU button to display the On-Screen
Menu.  Press the Point
7 8buttons to move the red
framed pointer to the PC Adjust Menu icon.1
2Press the Point edbuttons to move the red framed
pointer to the item that you want to adjust and then
press the SELECT button to display the adjustment
dialog box.  Press the Point
7 8buttons to adjust the
value.
Move the red framed
pointer to an item and
press the SELECT button.
PC Adjust MenuPC Adjust Menu icon
Eliminate flicker from the image...

29
Computer Input
Adjust the horizontal area displayed by this projector.  Press
the Point
7 8buttons to decrease/increase the value. Display area H
Adjust the vertical area displayed by this projector.  Press
the Point
7 8buttons to decrease/increase the value. Display area V
Reset
Store
Exit the PC Adjust Menu.
Quit
To store adjusted data, move the red framed pointer to the
Store item and then press the SELECT button.  Move the
red arrow pointer to any of Mode 1 to 5 in which you want
to store and then...

30
Computer Input
Press the MENU button to display the On-Screen
Menu.  Press the Point
7 8buttons to move the red
framed pointer to the Image Select Menu icon.1
2Press the Point edbuttons to move the red framed
pointer to the level that you want to set and then press
the SELECT button.Move the red framed pointer
to the level and press the
SELECT button.
The level being selected.
Image Select Menu
Normal picture level preset on this projector.Standard
Picture level with improved halftone for...