Eiki Projector Lc Xb21b User Manual
Have a look at the manual Eiki Projector Lc Xb21b User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 422 Eiki manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Check the indicators for projector condition. Indicators and Projector Condition The projector is off. (The AC power cord is unplugged.) The projector is preparing for stand-by or the projection lamp is being cooled down. The projector cannot be turned on until cooling is completed. The temperature inside the projector is abnormally high. The projector cannot be turned on. When the projector is cooled down enough and the temperature returns t o n o r m a l , t h e P O W E R i n d i c a t o r l i g h t s r e d a n d t h e projector can be turned on. (The WARNING indicator keeps blinking.) Check and clean the air filters. Projector Condition The projector is ready to be turned on with the POWER O N / S TA N D - B Y b u t t o n o n t h e t o p c o n t r o l o r o n t h e remote control. POWER red/green Indicators LAMP REPLACE yellowWARNING red The projector detects an abnormal condition and cannot be turned on. Unplug the AC power cord and plug it again to turn on the projector. If the projector is turned off again, disconnect the AC power cord and contact the dealer or the service center. Do not leave the projector on. It may cause an electric shock or fire hazard. The projector is operating normally. The projector is in the Power management mode. The projector has been cooled down enough and the temperature returns to normal. When turning on the projector, the WARNING indicator stops blinking. Check and clean the air filters. • • • green• • • red• • • off • • • blinks green When the life of the projection lamp draws to an end, the LAMP REPLACE indicator lights yellow. When this indicator lights yellow, replace the projection lamp with a new one promptly. Reset the lamp replacement counter after replacing the lamp. See pages 54 and\ 55. • • • blinks red Appendix 61
Appendix 6 Compatible Computer Specifications Basically this projector can accept the signal from all computers with the V, H-Frequency below mentioned and less than 110 MHz of Dot Clock. When selecting these modes, PC adjustment can be limited. MAC LC13640 x 48034.9766.60MAC 13640 x 48035.0066.67 MAC 1683 x 6449.774.55 MAC 19104 x 76860.475.08 SVGA 1800 x 60035.15656.5SVGA 800 x 60037.8860.3SVGA 3800 x 60046.87575.00SVGA 4800 x 60053.67485.06SVGA 5800 x 60048.087.19SVGA 6800 x 60037.9061.03SVGA 7800 x 60034.5055.38SVGA 8800 x 60038.0060.51SVGA 9800 x 60038.6060.31 SVGA 11800 x 60038.0060.51 XGA 10104 x 768XGA 11104 x 768XGA 1104 x 768XGA 13104 x 768 6.0477.07 XGA 14104 x 768 61.0075.70 XGA 15104 x 768 35.586.96 (Interlace) 46.9058.0 XGA 8104 x 768 47.0058.30 XGA 9104 x 768 58.037.00 63.4879.3536.0087.17 (Interlace) SXGA 7180 x 104 SXGA 10180 x 960 81.1376.107 60.0060.00 XGA 1104 x 768 XGA 4104 x 768 48.3660.00 XGA 6104 x 768XGA 7104 x 768 56.47670.07 48.5060.044.0054.58 SXGA 8180 x 104SXGA 9180 x 10463.9860.079.97675.05 XGA 5104 x 76860.3174.9 VGA 7640 x 48043.6985.00 575i––––––––15.6550.00 (Interlace)480i––––––––15.73460.00 (Interlace) SXGA 1115 x 90071.4075.60SXGA 11115 x 90061.065.0 SVGA 10800 x 6003.7051.09 SXGA 13180 x 10450.0086.00 (Interlace) ON-SCREEN DISPLA yRESOLUTIONH-Freq . (kHz)V-Freq . (Hz) VGA 1640 x 48031.4759.88VGA 70 x 40031.4770.09VGA 3640 x 40031.4770.09VGA 4640 x 48037.8674.38VGA 5640 x 48037.867.81VGA 6640 x 48037.5075.00 SXGA 1115 x 86464.070.40 ON-SCREEN DISPLA yRESOLUTIONH-Freq . (kHz)V-Freq . (Hz) SXGA 4180 x 10463.3459.98SXGA 5180 x 104SXGA 6180 x 10463.7460.0171.6967.19 SXGA 180 x 1046.5058.60SXGA 3180 x 10463.9060.00 XGA 104 x 76868.67784.997XGA 3104 x 76860.0375.03 SXGA 18180 x 10446.4386.70 (Interlace) SXGA 19180 x 10463.7960.18 SXGA 14180 x 104SXGA 15180 x 104SXGA 16180 x 104SXGA 17115 x 900 50.0094.00 (Interlace) 63.3760.0176.977.00 UXGA 41600 x 10093.7575.00 UXGA 11600 x 100UXGA 1600 x 100UXGA 31600 x 100 75.0060.0081.565.0087.570.00 WXGA 6180 x 768WXGA 7180 x 768WXGA 8 47.77659.87060.8974.89368.63384.837180 x 768 61.8566.00 MAC180 x 96075.0075.08MAC180 x 104480p––––––––575p–––––––– 80.0075.0831.4759.88 1080i–––––––– 31.550.00 33.7560.00 (Interlace) 70p––––––––1035i––––––––45.0060.0033.7560.00 (Interlace) 1080i––––––––8.1550.00 (Interlace) SXGA+ 11400 x 105063.97060.190 MAC1115 x 87068.6875.06 WXGA 1360 x 768WXGA 31376 x 768WXGA 41360 x 768 47.7060.0048.3660.0056.167.00 WXGA 11366 x 76848.3660.00 SXGA+ 1400 x 105063.35060.10SXGA+ 31400 x 105065.1059.900 SXGA 0180 x 10491.14685.04
Technical Specifications Mechanical Information Projector Type Multi-media Projector Dimensions (W x H x D) 1.99" x 3.15" x 9.33" (330 mm x 80 mm x 37 mm) (Not including protrusion) Net Weight 6.4 lbs (.9 kg) Foot Adjustment 0˚ to 10.0˚ Panel Resolution LCD Panel System 0.6" TFT Active Matrix type, 3 panels Panel Resolution 1,04 x 768 dots Number of Pixels ,359,96 (1,04 x 768 x 3 panels) Signal Compatibility Color System PAL, SECAM, NTSC, NTSC4.43, PAL-M, and PAL-N High Definition TV Signal 480i, 480p, 575i, 575p, 70p, 1035i, and 1080i Scanning Frequency H-sync. 15 ~ 100 kHz, V-sync. 50 ~ 100 Hz Optical Information Projection Image Size (Diagonal) Adjustable from 40" to 300" Projection Lens F 1.65 ~ 1.83 lens with f .5 mm ~ 7 mm with manual zoom and focus Throw Distance 4.7' - 43.3' (1.4m - 13.m) Projection Lamp 00W Interface Video Input Jack RCA Type x 1 Audio Input Jacks RCA Type x Computer In 1/ S-VIDEO In Analog RGB (Mini D-sub 15 pin) Terminal x 1 /Component In Computer In / Monitor Out Analog RGB (Mini D-sub 15 pin) Terminal x 1, In/Out switchable Component/ Computer Audio Input Jack Mini Jack (stereo) x 1 Service Port Connector Mini DIN 8 pin x 1 Audio Output Jack Mini Jack (stereo) x 1 (Variable) Audio Internal Audio Amp 1.0 W RMS Built-in Speaker 1 speaker, ø1.1" (8 mm) Power Voltage and Power Consumption AC 100 ~ 10 V (3.A Max. Ampere), 50/60 Hz (The U.S.A and Canada) AC 00 ~ 40 V (1.6A Max. Ampere), 50/60 Hz (Continental Europe and The U.K.) Operating Environment Operating Temperature 41˚F ~ 95˚F (5˚C ~ 35˚C) Storage Temperature 14˚F ~ 140˚F (-10˚C ~ 60˚C) Remote Control Battery AA or LR6 1.5 V ALKALINE TYPE x Operating Range 16.4' (5 m)/±30˚ Dimensions 1.9" (W) x 0.87" (H) x 5.7" (D) (49 mm x mm x 145.3 mm) Net W eight 3.53 oz (100 g) (including batteries) 63 Appendix
64 Appendix Accessories Owner's Manual (CD-ROM) Quick Reference Guide AC Power Cord Remote Control and Batteries VGA Cable PIN Code Label Lens Cover with string Serial Control Cable ● The specifications are subject to change without notice.● LCD panels are manufactured to the highest possible standards. Even though 99.99% of the pixels are effective, a tiny fraction of the pixels (0.01% or less) may be ineffective by the characteristics of the LCD panels. Model No. COMPONENT-VGA Cable : AH-98771 SCART-VGA Cable : AH-98881 S-VIDEO-VGA Cable : AH-98661 Soft Carrying Case : AH-801 The parts listed below are optionally available. When ordering those parts, specify the item and Model No. to the sales dealer. Optional Parts
65 Appendix Terminal: Mini DIN 8-PIN SERVICE PORT CONNECTOR COMPUTER IN/S-VIDEO IN/COMPONENT IN/MONITOR OUT TERMINAL (ANALOG) Terminal : Analog RGB (Mini D-sub 15 pin) 512341096781514131112 Configurations of Terminals Red (R/Cr/S-C) Input/R Output Ground (Horiz.sync.) Green (G/Y/S-Y) Input/G Output ----- Blue (B/Cb/---) Input/B Output Ground (Red) Ground (Green) Ground (Blue) 1 5 2 4 3 6 7 8 5V / --- Horiz. sync. Input/Output ,Composite H/V sync.Input Ground (Vert.sync.) DDC data / --- Ground Vert. sync. Input/Output DDC clock / --- 9 13 10 1 11 14 15 Serial GND R X D ----- ----- ----- T X D ----- 4 1 3 2 5 6 7 -----8
66 Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or lost the number and unable to operate the projector, contact the service station. PIN Code Number Memo Factory default set No: 1 3 4* * Should the four-digit number be changed, the factory set number will be invalid. PIN Code Lock No . Logo PIN Code Lock No . Factory default set No: 4 3 1* While the projector is locked with the PIN code.... Put the label below (supplied) on in a prominent place of the projector's body while it is locked with a PIN code. Appendix
67 Dimensions Appendix 3.74(95) 13.0 (330)2.18(55.3) 9.33(237) 3.62(92) 3.94(100) 5.83(148) 4.72(120) 2.95(75) 5.31(135) Screw Holes for Ceiling Mount Screw: M4 Depth: 0.394(10.0) Unit:inch(mm) 10°MAX 3.15(80) Appendix
KM7BC©2008 Eiki International, Inc. U.S.A.EIKI International, Inc. 30251 Esperanza Rancho Santa Margarita CA 92688-2132 U.S.A. Tel : 800-242-3454 (949)-457-0200 Fax : 800-457-3454 (949)-457-7878 E-Mail : [email protected] Deutschland & ÖsterreichEIKI Deutschland GmbH Am Frauwald 12, 65510 Idstein Deutschland Tel : 06126-9371-0 Fax : 06126-9371-14 E-Mail : [email protected] CanadaEIKI CANADA - Eiki International, Inc. P.O. Box 156, 310 First St. - Unit 2, Midland, ON, L4R 4K8, Canada Tel : 800-563-3454 (705)-527-4084 Fax : 800-567-4069 (705)-527-4087 E-Mail : [email protected] Eastern EuropeEIKI CZECH spol. s.r.o. Umelecká 15 170 00 Praha 7 Czech Republic Tel : +42 02 20570024+42 02 20571413 Fax : +42 02 20571411 E-Mail : [email protected]ˆ Japan & WorldwideEIKI Industrial Company Limited. 4-12 Banzai-Cho, Kita-Ku, Osaka, 530-0028 Japan Tel : +81-6-6311-9479 Fax : +81-6-6311-8486 WorldWide Website http://www.eiki.com ChinaEIKI (Shanghai) Co.,LTD 1. Dapu Road, Golden Magnolia Plaza #2109 Shanghai, 200023 China Tel : 86-21-5396-0088 Fax : 86-21-5396-0318 E-Mail : [email protected] KM7BC©2008 Eiki International, Inc. U.S.A.EIKI International, Inc. 30251 Esperanza Rancho Santa Margarita CA 92688-2132 U.S.A. Tel : 800-242-3454 (949)-457-0200 Fax : 800-457-3454 (949)-457-7878 E-Mail : [email protected] Deutschland & ÖsterreichEIKI Deutschland GmbH Am Frauwald 12, 65510 Idstein Deutschland Tel : 06126-9371-0 Fax : 06126-9371-14 E-Mail : [email protected] CanadaEIKI CANADA - Eiki International, Inc. P.O. Box 156, 310 First St. - Unit 2, Midland, ON, L4R 4K8, Canada Tel : 800-563-3454 (705)-527-4084 Fax : 800-567-4069 (705)-527-4087 E-Mail : [email protected] Eastern EuropeEIKI CZECH spol. s.r.o. Umelecká 15 170 00 Praha 7 Czech Republic Tel : +42 02 20570024 +42 02 20571413 Fax : +42 02 20571411 E-Mail : [email protected]ˆ Japan & WorldwideEIKI Industrial Company Limited. 4-12 Banzai-Cho, Kita-Ku, Osaka, 530-0028 Japan Tel : +81-6-6311-9479 Fax : +81-6-6311-8486 WorldWide Website http://www.eiki.com ChinaEIKI (Shanghai) Co.,LTD 1. Dapu Road, Golden Magnolia Plaza #2109 Shanghai, 200023 China Tel : 86-21-5396-0088 Fax : 86-21-5396-0318 E-Mail : [email protected] U.S.A. EIKI International, Inc. 30251 Esperanza Rancho Santa Margarita CA 92688-2132 U.S.A. Tel : 800-242-3454 (949)-457-0200 Fax : 800-457-3454 (949)-457-7878 E-Mail : [email protected] Canada EIKI CANADA - Eiki International, Inc. P.O. Box 156, 310 First St. - Unit 2, Midland, ON, L4R 4K8, Canada Tel : 800-563-3454 (705)-527-4084 Fax : 800-567-4069 (705)-527-4087 E-Mail : [email protected] Deutschland & Österreich EIKI Deutschland GmbH Am Frauwald 12 65510 Idstein Deutschland Tel : 06126-9371-0 Fax : 06126-9371-14 E-Mail : [email protected] Eastern Europe EIKI CZECH spol. s.r.o. Umělecká 15 170 00 Praha 7 Czech Republic Tel : +42 02 20570024 +42 02 20571413 Fax : +42 02 20571411 E-Mail : [email protected] China EIKI (Shanghai) Co., Ltd. 1. Dapu Road, Golden Magnolia Plaza #2109 Shanghai, 200023 China Tel : 86-21-5396-0088 Fax : 86-21-5396-0318 E-mail : [email protected] South East Asia EIKI Industrial (M) Sdn Bhd No. 3A-2C, 4th Floor, Jalan PJU 8/3A, Perdana Business Centre, Bandar Damansara Perdana, 47820 Petaling Jaya, Selangor Malaysia Tel : +603-7727-2498 Fax : +603-7727-2742 Japan & Worldwide EIKI Industrial Company Limited. 4-12 Banzai-Cho, Kita-Ku, Osaka, 530-0028 Japan Tel : +81-6-6311-9479 Fax : +81-6-6311-8486 WorldWide Website http://www.eiki.com