Eiki Projector Lc Xb21b User Manual

							Setting
41
Blue back
Press  the  Point ◄►  buttons  to  switch  On/Off.    When 
this  function  is  "On",  a  blue  image  is  displayed  while 
the input signal is not detected. 
Keystone
Press  the  MENU  button  to  display  the  On-Screen 
Menu.    Press  the  Point ◄►  buttons  to  move  the 
red framed pointer to the Setting Menu icon.
Language
T h e   l a n g u a g e   u s e d   i n   t h e   O n - S c r e e n   M e n u   i s 
available  in  English,  German,  French,  Italian,  Spanish, 
P o r t u g u e s e ,   D u t c h ,   S w e d i s h ,   F i n n i s h ,   P o l i s h , 
Hungarian,  Romanian,  Russian,  Chinese,  Korean,  or 
Japanese.
P r e s s  t h e  P o i n t ▲ ▼  b u t t o n s  t o  m o v e  t h e  r e d 
framed  pointer to the item that you want to set and 
then press the SELECT button.  The Setting dialog 
box appears.
This  function  corrects  distortion  of  a  projected  image. 
Select either Store or Reset with the Point ◄► buttons, 
and  then  press  the  SELECT  button.    The  keystone 
dialog box appears.  Correct keystone with the Point 
▲
▼ buttons. (p.)
  Store
  . . . .  store  the keystone correction even when 
the AC power cord is unplugged.
  Reset
 . . . .  r
eset  the  keystone  correction  when  the 
AC power cord is unplugged.
Setting
This  projector  has  Setting  menu  that  allows  you  to  set 
up the other various functions described as follows:
1
2
Setting Menu (Language)
Set the red framed pointer 
to the item and press the 
SELECT button.
Press the SELECT 
button at Language 
item, the Language 
Menu appears.Setting Menu icon
Press the SELECT 
button at this item 
to display the other 
languages.
Press the SELECT 
button at this item to 
close the dialog box. 
						

							Setting
4
Display
Press  the  Point ◄►  buttons  to  switch  On/Off.  This 
function decides to display On-Screen Displays.
On . . . . . . . . . . . . .  Show 
 all  the  On-Screen  Displays. 
Use  this  function  when  you  want 
to  project  images  after  the  lamp 
becomes  bright  enough.    Factory 
default setting is this mode.
Countdown off  . . .  S
how  the  input  image  instead  of 
the  countdown  when  turning  on 
the  projector.    Use  this  function 
w h e n  y o u  w a n t  t o  p r o j e c t  t h e 
image  as  early  as  possible  even 
w h e n   t h e   l a m p   i s   n o t   b r i g h t 
enough.
Off . . . . . . . . . . . . .  Do 
 not  show  On-Screen  Displays, 
except.
  ●
  On-Screen Menu 
  ●  "Power off?" message (p.19)
  ●  P-Timer 
  ●  "No signal" message for Power management item 
(p.46)
  ●

  "Please wait..." message
  ●  Arrows for panning mode (p.32)
Logo select
This function decides the start-up display as follows:
  User
. . . .  the image you captured
  Default
. . the factory-set logo
  Of

f  . . . . .  countdown only
Logo (Logo and Logo PIN code lock settings)
This  function  allows  you  to  customize  the  screen  logo 
with  Logo  select,  Capture,  and  Logo  PIN  code  lock 
functions.
 Note:
    W h e n  O n  i s  s e l e c t e d  i n  L o g o  P I N  c o d e  l o c k 
f u n c t i o n ,  L o g o  s e l e c t  a n d  C a p t u r e  f u n c t i o n s 
cannot be selected.Logo select 
						

							Setting
43
Capture
This  function  enables  you  to  capture  the  image 
being  projected  and  use  it  for  a  start-up  display  or 
interval of presentations.
A f t e r  c a p t u r i n g  t h e  p r o j e c t e d  i m a g e ,  g o  t o  t h e 
Logo  select  function  and  set  it  to  "User".    Then 
the  captured  image  is  displayed  when  turning  on 
the  projector  next  time  or  pressing  the  NO  SHOW 
button. (p.
4) 
To  capture  the  image,  select  [Yes].    To  cancel  the 
Capture function, select [No].
Note:
  • Before  capturing  an  image,  select  Standard 
in  the  Image  Select  Menu  to  capture  a  proper 
image. (p.30, 37.)
  •

  A  s i g n a l  f r o m  a  c o m p u t e r  c a n  b e  c a p t u r e d 
up  to  XGA  (10 4x768).    A  signal  from  video 
equipment  can  be  captured  except  for  7 0p, 
1035i, and 1080i.
  •

  W h e n  c a p t u r i n g  t h e  i m a g e  t h a t  h a s  b e e n 
a d j u s t e d   b y   t h e   K e y s t o n e   f u n c t i o n ,   t h e 
adjustment  data  is  automatically  reset  and  the 
projector  captures  an  image  without  keystone 
adjustment.
  •

  When the Logo PIN code lock function is "On", 
Capture menu cannot be selected.
  •

  When  starting  to  capture  a  new  image,  the 
previously  stored  image  is  cleared  even  if  you 
cancel the capturing.
  •

  " U s e r "  c a n  n o t  b e  s e l e c t e d  i f  n o  i m a g e  i s 
captured.
This function prevents an unauthorized person from 
changing the screen logo.
  Of
f  . . . . . .  t
h e  s c r e e n  l o g o  c a n  b e  c h a n g e d 
f r e e l y  f r o m  t h e  L o g o  s e l e c t  m e n u .  
(p.4)
  On
  . . . . . .  t
he  screen  logo  cannot  be  changed 
without the Logo PIN code.
I f  y o u  w a n t  t o  c h a n g e  t h e  L o g o  P I N  c o d e  l o c k 
setting,  enter  a  Logo  PIN  code  along  the  following 
steps. 
  The initial Logo PIN code is set "431" at the 
factory.
Logo PIN code lockLogo PIN code lock
Select [Yes] to capture the 
projected image.
Select [Yes] to stop 
capturing.
Capture 
						

							Setting
44
To Enter the Logo PIN code
Select a number by pressing the Point ▲▼ buttons. 
And then press the Point ► button to fix the number 
and move the pointer.  The number changes to " ".  
If  you  fixed  an  incorrect  number,  move  the  pointer 
to  the  number  you  want  to  correct  by  pressing  the 
Point 
◄  button,  and  then  select  the  correct  number 
by pressing the Point ▲▼ buttons.
Repeat  this  step  to  complete  entering  a  four-digit 
number.
A f t e r  e n t e r i n g  t h e  f o u r - d i g i t  n u m b e r,  m o v e  t h e 
pointer  to  "Set"  by  pressing  the  Point 
►  button.  
Press  the  SELECT  button  so  that  you  can  change 
the Logo PIN code lock setting.
If  you  entered  an  incorrect  Logo  PIN  code,  "Logo 
PIN  code"  and  the  number  (    )  turns  red.  
Enter a Logo PIN code all over again.
To Change the Logo PIN code
Logo  PIN  code  can  be  changed  to  your  desired 
four-digit  number.    Select  "Logo  PIN  code  change" 
with  the  Point 
▼  button  and  press  the  SELECT 
button.  Set a new Logo PIN code.
Be sure to note the new Logo PIN code and keep it 
at hand.  If you lost the number, you could no longer 
change  the  Logo  PIN  code  setting.    For  details  on 
PIN
  code setting, refer to relevant instructions of the 
PIN code lock function on pages 48 and 49.
CAUTION

:
WH EN   yOU  H AVE  C H A N GED   TH E LOGO  PI N 
C O D E , W R I T E  D O W N  T H E  N E W  P I N  C O D E 
I N  C O L U M N  O F  T H E   L O G O  P I N C O D E  N O  . 
MEMO  ON PAGE  66,  AND KEEP  IT  SECUREL y . 
SHOULD  THE   LOGO  PIN CODE  BE  LOST  OR 
FORGOTTEN , THE  LOGO  PIN CODE  SETTING  
CAN NO LONGER BE CHANGED . Logo PIN code lock Dialog Box
After a correct Logo PIN code is entered, the 
following dialog box appears.
Select On/Off by pressing the Point◄►
buttons or change the Logo PIN code. 
						

							Setting
45
Ceiling
When  this  function  is  "On",  the  picture  is  top/bottom 
and  left/right  reversed.   This  function  is  used  to  project 
the image from a ceiling mounting the projector.
Rear
When  this  function  is  "On",  the  picture  is  left/right 
reversed.   This  function  is  used  to  project  the  image  to 
a rear projection screen.
Ceiling 
Rear 
Input search
This  function  detects  the  input  signal  automatically. 
When  finding  a  signal,  the  search  will  stop.    Use  the 
Point 
◄► buttons to select one of the following.
  Off        Input search does not work.
  On1      Input search works   
under the situation below.                  
               •   When  pressing  the  INPUT  button  on  the  top 
control.
               • 

 
When  pressing  the  COMPUTER  button  or 
VIDEO button on the remote control.
  On

      Input search works   under the situation below.
               •   When turning on the projector with pressing 
the POWER ON/STAND-BY button on the 
top control or on the remote control.
               • 

 
When  pressing  the  COMPUTER  button  or 
VIDEO button on the remote control.
               • 

 
When missing the current input signal.  
*
               • 
   When  pressing  the  INPUT  button  on  the  top 
control.
 Note:
  • While Input search is set On1 or On, the status of Input and Lamp are displayed every time the 
signal is switched.
  •

  If  any  of  the  INPUT  button  on  the  top  control  or  COMPUTER/VIDEO  button  on  the  remote 
control is pressed while Input search is on, Input search will stop.
*If the No show or Freeze function is active, cancel it 
  
 to activate the Input search. It is also unavailable when   
 On-Screen menu is displayed. Terminal
The 

COMPUTER  IN  /MONITOR  OUT  terminal  on  the 
back  of  the  projector  is  switchable  for  computer  input 
or 
 monitor output.  (See page 9)  Select Computer   or 
Monitor out with the Point 
◄► buttons.
  Computer ......computer input
  Monitor out.......monitor output
This Terminal function is not available when Computer 

  has been selected as the input source.Change the 
input source to the others (Computer 1 or Video) in 
order to use the 
 Terminal function. (p.5, 34, 35) 
						

							Setting
46
Power management
F o r   r e d u c i n g   p o w e r   c o n s u m p t i o n   a s   w e l l   a s 
maintaining  the  lamp  life,  the  Power  management 
f u n c t i o n  t u r n s  o f f  t h e  p r o j e c t i o n  l a m p  w h e n  t h e 
projector is not used for a certain period.
When  the  input  signal  is  interrupted  and  no  button  is 
pressed  for  more  than  30  seconds,  the  timer  display 
with "No signal" appears.  The countdown starts to turn 
off the lamp.
Select one of the operations:
 Ready . . . . . . . .  W
 h e n   t h e   l a m p   h a s   b e e n   f u l l y 
cooled  down,  the  POWER  indicator 
c h a n g e s  t o  g r e e n  b l i n k i n g .    I n 
this  condition,  the  projection  lamp 
is    turned  on  if  the  input  signal  is 
reconnected  or  any  button  on  the 
t o p  c o n t r o l  o r  r e m o t e  c o n t r o l  i s 
pressed.
  Shut down
  . . . . W
h e n   t h e   l a m p   h a s   b e e n   f u l l y 
cooled  down,  the  power  is  turned 
off.
  Of

f   . . . . . . . . . .  Power management function is of f.
T h e n  s e t  t h e  c o u n t d o w n  t i m e r  w i t h  t h e  P o i n t 
◄ ►buttons.
Time left before Lamp is off.
Press the SELECT button 
at Power management 
and this box appears.  
Choose one of three 
settings with the Point◄
►buttons, and go to the 
timer with the Point 
▲▼ 
buttons and set time with 
the Point 
◄►buttons.
Power management
Note:
   Factory default is “Ready: 5 min.” 
						

							Setting
47
Remote control
This  projector  provides  two  different  remote  control 
codes:  the  factory-set  initial  code  (Code  1)  and  the  
secondary  code  (Code  ).    This  switching  function 
prevents  remote  control  interference  when  operating 
several  projectors  or  video  equipment  at  the  same 
time.
W
 hen  operating  the  projector  in  "Code  ",  both  the 
projector  and  the  remote  control  must  be  switched  to 
"Code 
 ".
To change the code for the projector:
Select either "Code 1" or "Code 
 " in this Setting Menu.
To change the code for the remote control:
Press  and  hold  both  the  MENU  and  IMAGE  buttons 
together  for  5  seconds  or  more.    After  changing  the 
code, make sure the  remote control operates properly.
Remote control
Press and hold 
MENU and 
IMAGE buttons 
for more than 5 
seconds.
On start
W h e n   t h i s   f u n c t i o n   i s   " O n " ,   t h e   p r o j e c t o r   i s 
automatically  turned  on  just  by  connecting  the  AC 
power cord to a wall outlet.
 Note:
    B e  s u r e  t o  t u r n  t h e  p r o j e c t o r  o ff  p r o p e r l y  ( s e e 
"Turning  Off  the  Projector"  on  page  19).    If  the 
projector  is  turned  off  in  the  incorrect  sequence, 
the On start function does not operate properly.
Lamp control
On start
 Note:
     I f  t h e  b a t t e r i e s  a r e  r e m o v e d  f r o m  t h e  r e m o t e 
control for a long period of time, the remote control 
code will be reset.
This  function  allows  you  to  change  brightness  of  the 
screen.
 Normal . . . . . normal brightness 
  Auto
. . . . . . .  b
 r i g h t n e s s  a c c o r d i n g  w i t h  t h e 
input  signal 
  Eco
  . . . . . . .  lower 
 brightness reduces the lamp 
power  consumption  and  extends 
the lamp life.
 Note:
     Lamp  mode  cannot  be  changed  for  a  while  after 
turning on the projector. Lamp needs some time to 
stabilize  after  the  power  is  turned  on.  Stored  lamp 
mode will be active after the lamp is stabilized.    
						

							Setting
48
Key lock
Security (Key lock and PIN code lock settings)
T h i s  f u n c t i o n  a l l o w s  y o u  t o  u s e  K e y  l o c k  a n d  P I N 
code  lock  function  to  set  the  security  for  the  projector 
operation.
This  function  locks  operation  of  the  top  control  or 
the remote control.
It  is  useful  to  prevent  operation  by  an  unauthorized 
person.. . . . . . not locked.
. . . . . .  l
ock  the  operation  of  the  top 
c o n t r o l .  To  u n l o c k ,  u s e  t h e 
remote control.
. . . . . .  l
o c k   t h e   o p e r a t i o n   o f   t h e 
r e m o t e  c o n t r o l .  To  u n l o c k , 
use the top control.
If  the  top  control  accidentally  becomes  locked  and 
y o u  d o  n o t  h a v e  t h e  r e m o t e  c o n t r o l  o r  t h e r e  i s 
something  wrong  with  your  remote  control,  contact 
the dealer where you purchased the projector or the 
service center.
Key lock
PIN code lock
This  function  prevents  the  projector  from  being 
operated  by  an  unauthorized  person  and  provides 
the following settings for security options.
  Of

f  . . . . .  t
h e  p r o j e c t o r  i s  n o t  l o c k e d  w i t h  a 
PIN code.
  On1
  . . . .  require 
 to  enter  a  PIN  code  every  time 
turning on the projector.
  On
   . . . .  require  to  enter  a  PIN  code  to  operate 
t h e  p r o j e c t o r  o n c e  t h e  p o w e r  c o r d 
is  disconnected;    as  long  as  the  AC 
power  cord  is  connected,  the  projector 
can be operated without a PIN
  code.
Wh e n e v e r  to  c h a n g e  th e  P I N  c o d e  l o c k  s e tti n g 
or  the  PIN  code  (the  four-digit  number),  you  are 
required 
 to enter the PIN code.  The "134" is set as 
the initial PIN code at the factory. PIN code lock
S e l e c t  K e y  l o c k .    C h o o s e 
one  of  the  alternatives  with 
t h e  P o i n t 
▲ ▼  b u t t o n s  a n d 
select [Yes] to activate it.
When the projector is locked 
with the PIN code, the PIN 
code lock mark appears on the 
menu bar. 
						

							Setting
49
To Enter the PIN code
Select a number by pressing the Point ▲▼ buttons. 
And then press the Point ► button to fix the number 
and move the pointer.  The number changes to "".  
If  you  fixed  an  incorrect  number,  move  the  pointer 
to  the  number  you  want  to  correct  by  pressing  the 
Point 
◄  button,  and  then  select  the  correct  number 
by pressing the Point ▲▼ buttons.
Repeat  this  step  to  complete  entering  a  four-digit 
number. 
A f t e r  e n t e r i n g  t h e  f o u r - d i g i t  n u m b e r,  m o v e  t h e 
pointer  to  "Set"  by  pressing  the  Point 
►  button.  
Press  the  SELECT  button  so  that  you  can  change 
the following PIN code lock settings.
If  you  entered  an  incorrect  PIN  code,  "PIN  code" 
and  the  number  (
   )  turns  red.    Enter  a  PIN 
code all over again.
The PIN code can be changed to your desired four-
digit number.
Select  "PIN  code  change"  with  the  Point 
▼  button, 
and  press  the  SELECT  button  to  display  the  New 
PIN  code input dialog box.
Select a number by pressing the Point 
▲▼ buttons.  
And then press the Point ► button to fix the number 
a n d  m o v e  t h e  p o i n t e r.  R e p e a t  i t  t o  c o m p l e t e 
entering a four-digit number.  After entering the four-
digit  number,  move  the  pointer  to  "Set"  by  pressing 
the Point 
► button.  Then press the SELECT button.
To Change the PIN code 
CAUTION:
WHEN   yOU  HAVE  CHANGED   THE PIN CODE , 
WRITE  DOWN THE NEW  PIN CODE  IN COLUMN 
OF  THE  PIN CODE  NO . MEMO  ON PAGE 66,  AND 
KEEP  IT  SECUREL y . IF yOU  FORGET yOUR PIN 
CODE,  THE PROjECTOR  CAN NO LONGER  BE 
STARTED .
Select  Off,  On1,  or  On  with  the  Point ◄►  buttons 
and then move the red framed pointer to "Quit" with 
the  Point 
▼  button.  Press  the  SELECT  button  to 
close the dialog box.
To Change the PIN code lock setting
Change the PIN code
Select PIN code change and 
press the SELECT  button. 
The New PIN code input 
dialog box appears.
The input numbers are being 
displayed for confirmation.
Change the PIN code lock setting
Select a desired setting with 
the Point ◄► buttons.
Enter a PIN code
The input numbers change 
to "" for security. 
Move the pointer to "Set" by pressing 
the Point 
 ► button.  And then press 
the SELECT button. 
						

							Setting
50
This  function  is  used  to  reset  the  lamp  replacement 
counter.  When replacing the projection lamp, reset the 
lamp  replacement  counter  by  using  this  function.    See 
page 55 for operation.Lamp counter 
Factory default
This  function  returns  all  setting  values  except  for  the 
user  logo,  PIN  code  lock,  Logo  PIN  code  lock,  and  the 
lamp counter to the factory default settings.
This  function  provides  the  following  alternatives  in  the 
cooling  fans'  operation  after  turning  off  the  projector. 
(p.19)
 
L1
......  normal operation
  L
 ......  s lower  and  lower-sound  than  the  normal 
operation  (L1),  but  it  takes  longer  to  cool 
the projector down.
 Note:
   Setting  "Fan  control  "  to  On  1  or  On    affects  L 
operation in "Fan". Fan
Exit the Setting Menu.
Quit
Select Factory default 
and this box appears. 
Select [Yes], and the 
next box appears.
Factory default
Select [Yes] to 
activate it.
This projector provides Fan control function in the   
Setting menu.
Choose the running speed of cooling fans from the  
following options according to the ground elevation  
under which you use the projector.
  Of
f .....  N ormal  speed.  Set  this  function  to  "Off" 
when  using  the  projector  in  non-high 
altitude environment.
  On 1
.... F
aster  than  Off  mode.  Select  this  mode 
when  using  the  projector  in  high  altitudes 
( about  1, 00  meters  or  more  above 
the  sea  level)  where  the  fans  have  less 
cooling effect.
  On 
....  F a s t e r   t h a n   O n   1   m o d e .   S e l e c t   t h i s 
mode  when  using  the  projector  in  higher 
altitudes  than  above  where  the  fans  have 
lesser cooling effect.
 Note:
   Fan noise becomes louder in On 1 and On . Fan control