Eiki Projector Lc Xb21b User Manual

							31
Computer Input
Press  the  MENU  button  to  display  the  On-Screen 
Menu.    Press  the  Point ◄►  buttons  to  move  the 
red framed pointer to the Image Adjust Menu icon.
P r e s s  t h e  P o i n t ▲ ▼  b u t t o n s  t o  m o v e  t h e  r e d 
framed  pointer  to  the  item  that  you  want  to  adjust, 
and  then  press  the  SELECT  button.    The  level 
of  each  item  is  displayed.    Adjust  each  level  by 
pressing the Point 
◄► buttons.
Image Level Adjustment
1
2
Move the red framed  
pointer to the item to be 
selected and then press 
the SELECT button.
Image Adjust Menu
Image Adjust Menu icon
Press  the  Point ◄  button  to  decrease  the  contrast  and 
the Point ► button to increase contrast. (From 0 to 63.)
Press  the  Point ◄  button  to  adjust  the  image  darker 
and  the  Point ►  button  to  adjust  the  image  brighter. 
(From 0 to 63.) Contrast
Brightness
Press the Point ◄ button to lighten the red tone and the 
Point ► button to deepen the red tone. (From 0 to 63.)
White balance (Red)
Press  the  Point ◄  button  to  lighten  the  green  tone  and 
the  Point ►  button  to  deepen  the  green  tone.  (From  0 
to 63.) White balance (Green)
Press  the  Point ◄  button  to  lighten  the  blue  tone  and 
the Point ► button to deepen the blue tone. (From 0 to 
63.) White balance (Blue)
Press the Point ◄► buttons to select the desired Color 
temp. level. (XLow, Low, Mid, or High)  Color temp  .
To  reset  the  adjusted  data,  select  Reset  and  press 
the  SELECT  button.  The  confirmation  box  appears 
and  then  select  [Yes].  All  adjustments  returns  to  their 
previous figures.
Reset
Press the Point ◄► buttons to adjust the gamma value 
to obtain better balance of contrast. (From 0 to 15.) Gamma
Press  the  Point ◄  button  to  soften  the  image  and  the 
Point ► button to sharpen the image. (From 0 to 15.)
Sharpness
Press the Point  ◄►
buttons to adjust the 
value.
Selected Image level
 Note:
    A f t e r  a d j u s t i n g  a n y  o f  t h e  W h i t e 
balance  Red,  Green,  or  Blue,  the 
Color temp changes to "Adj.". 
						

							Computer Input
3
Store
Exit the Image Adjust Menu.
Quit
To  store  the  adjusted  data,  select  Store  and  press  the 
SELECT  button.    Select  a  level  from  Image  1  to  4  with 
the Point 
▲▼ buttons and press the SELECT button.  A 
confirmation box appears and then select [Yes].
Stored  data  can  be  called  up  by  selecting  "Image"  in 
the Image Level Selection on page 30.
This  projector  has  the  picture  screen  resize  function,  which  enables  you  to  customize  the  image 
size.
Press  the  MENU  button  to  display  the  On-Screen 
Menu. Press the Point ◄► buttons to move the red 
framed pointer to the Screen Menu icon.
Press  the  Point ▲▼  buttons  and  move  the  red 
framed  pointer  to  the  function  that  you  want  to 
select and then press the SELECT button.2
Screen Size Adjustment
Provide the image to fit the screen size. Normal
True
Provide the image in its original size. When the original 
image size is larger than the screen size (104 x 768 ), 
this  projector  enters  panning  mode  automatically.  Pan 
the  image  with  Point 
▲▼◄►  buttons.  When  adjusted, 
the  arrows  turns  red.  When  reached  to  the  correction 
limit, the arrows disappears.
1
Wide
Provide  the  image  to  fit  wide  video  aspect  ratio  (16:9) 
by  expanding  the  image  width  uniformly.  This  function 
can  be  used  for  providing  a  squeezed  video  signal  at 
16:9.
Full 
Provide the full screen image.
Move the red framed 
pointer to any of 
Image 1 to 4 where 
you want to set 
and then press the 
SELECT button.
The confirmation 
box appears, 
then select [Yes].
Store item
Press the SELECT 
button at this item to 
store the adjusted data.
Move the red framed pointer 
to the function and press the 
SELECT button.
Screen Menu
Screen Menu icon
 Note:
  • T h i s   S c r e e n   M e n u   c a n n o t   b e 
operated  when  7 0p(HDTV),  1035i 
(HDTV), or 1080i (HDTV) is selected 
in the PC System Menu (p.
 6).
  • T h e  p r o j e c t o r  c a n n o t  d i s p l a y  a n y 
resolution  higher  than  1600x1 00. 
If  your  computer’s  screen  resolution 
is  higher  than  it,  reset  the  resolution 
to the lower before connecting to the 
projector.
  •

  The  image  data  in  other  than  XGA 
( 1 0 4 x 7 6 8 )  i s  m o d i f i e d  t o  f i t  t h e 
screen size in initial mode.
  •

  Tr u e ,  F u l l ,  a n d  D i g i t a l  z o o m  + / – 
cannot  be  selected  when  480i,  575i, 
480p,  or  575p  is  selected  in  the  PC 
System Menu (p.
 6). 
						

							Computer Input
33
When  the  D.ZOOM  +  (▲)  is  pressed,  the  On-Screen 
M e n u  d i s a p p e a r s  a n d  t h e  m e s s a g e  " D .  z o o m  + " 
is    displayed.    Press  the  D.ZOOM 
▲ or  the  SELECT 
b u t t o n  t o  e x p a n d  t h e  i m a g e  s i z e .    A n d  p r e s s  t h e 
Point 
▲▼◄►  buttons  to  pan  the  image.  The  Panning 
function  can  work  only  when  the  image  is  larger  than 
the screen size. Digital zoom +
When D.ZOOM – (▼) is pressed, the On-Screen Menu 
disappears and the message "D. zoom –" is displayed. 
P r e s s  t h e  D . Z O O M 
▼  o r  t h e  S E L E C T  b u t t o n  t o 
compress image size.
To  exit  the  Digital  zoom  +/–  mode,  press  any  button 
except  the  D.ZOOM 
▲▼  buttons,  SELECT,  and  Point 
buttons.
To  return  to  the  previous  screen  size,  select  a  screen 
size from the Screen Size Adjustment or select an input 
source 
 from the Input Source Selection (p.5) again, or 
adjust the screen size with the D.ZOOM 
▲▼ buttons.
Digital zoom –
For zooming in and out the imagesRemote Control 
D .ZOOM + button
POINT buttons
SELECT button
D .ZOOM - button
 Note:
  • T h e   p a n n i n g   f u n c t i o n   m a y   n o t 
operate  properly  if  the  stored  Mode 
i n  t h e  P C  A d j u s t  M e n u  i s  u s e d . 
(p.
 9)
  • T h e  m i n i m u m  c o m p r e s s i o n  r a t i o 
c a n  b e  l i m i t e d  d e p e n d i n g  o n  t h e 
input  signal  or  when  the  Keystone 
function is working.
  •

  Tr u e ,  F u l l ,  a n d  D i g i t a l  z o o m  + / –  cannot  be  selected  when  480i,  575i, 
480p,  or  575p  is  selected  in  the  PC 
System Menu  (p.
 6).
  • Digital  zoom  +/-  cannot  be  selected 
when Full or True is selected. 
						

							Video Input
34
Input Source Selection (Video)
Direct Operation
Remote Control 
VIDEO button
Press  the  MENU  button  to  display  the  On-Screen 
Menu. Press the Point ◄► buttons to move the red 
framed pointer to the Input Menu icon.
Press the Point ▲▼ buttons to move the red arrow 
p o i n t e r  t o  Vi d e o  a n d  t h e n  p r e s s  t h e  S E L E C T 
button.
1
2
Menu Operation
Move the pointer to 
Video and press the 
SELECT button.
Input Menu
Input Menu icon
Video 
Choose Video by pressing the INPUT button on the top 
control or the VIDEO button on the remote control.
Top Control
Computer 1
Computer 2 
Video
 Note:
  - When the Input Search function is set On1 or On,
      the  input  signal  will  be  searched  automatically.  (p.45)
 

 - Computer   is not displayed when the COMPUTER 
IN  /  MONITOR  OUT  terminal  is  set  as  Monitor 
out. (p.45)
INPUT button 
						

							Computer1
Video Input
35
Remote Control 
COMPUTER button
Choose  Computer  1  by  pressing  the  INPUT  button  on 
the  top  control  or  press  the  COMPUTER  button  on  the 
remote control.
Before using these buttons, correct input source should 
be  selected  through  Menu  operation  as  described 
below.
Input Source Selection (S-Video, Component, RGB Scart 21-pin)
Direct Operation
Press the Point ▲▼ buttons to move the red arrow 
pointer to Computer 1 and then press the SELECT 
button. 
After  the  Source  Select  Menu  appeared  for 
Computer  1,  move  the  pointer  to  S-Video, 
Component  or  RGB  (Scart)  and  then  press  the 
SELECT button.
1
2
3
Menu Operation
Press  the  MENU  button  to  display  the  On-Screen 
Menu.    Press  the  Point ◄►  buttons  to  move  the 
red framed pointer to the Input Menu icon.
When  the  input  source  is  coming 
from  video  equipment  connected 
to  the  COMPUTER  IN  1/S-VIDEO 
IN/COMPONENT  IN  terminal  with 
a  Component-VGA  Cable,  select 
Component.
When  the  input  source  is  coming 
from  video  equipment  connected  to 
the  COMPUTER  IN  1/S-VIDEO  IN/
COMPONENT IN terminal with a Scart-
VGA Cable, select RGB (Scart). 
Component
RGB (Scart)
Input Menu
Input Menu icon
Move the pointer to 
S-video, Component or 
RGB (Scart) and press the 
SELECT button.
Source Select Menu
 Note:
 • When the Input Search function is set On1 or On,  the  input  signal  will  be  searched  automatically 
(p.45)
 
• When  Monitor  out  is  selected  in  the  Terminal  function (p.45), Computer  is not displayed.
Move the pointer (red 
arrow) to Computer 1 and 
press the SELECT button.
W h e n   S - v i d e o   i n p u t   s i g n a l   i s 
connected  to  the  COMPUTER  IN 
1/S-VIDEO  IN/COMPONENT  IN  jack, 
select S-Video.S-video

 See Note at the bottom of this page.
Top Control
Computer 1
Video
Computer 2 
Computer 1
Computer 2 

INPUT button 
						

							Video Input
36
Press  the  MENU  button  to  display  the  On-Screen 
Menu. Press the Point ◄► buttons to move the red 
framed pointer to the AV System Menu icon.
Video System Selection
Press the Point ▲▼ buttons to move the red arrow 
pointer  to  the  system  that  you  want  to  select  and 
then press the SELECT button.
1
2
If  the  projector  cannot  reproduce  proper  video  image, 
it  is  necessary  to  select  a  specific  broadcast  signal 
f o r m a t  a m o n g  PA L ,  S E C A M ,  N T S C ,  N T S C  4 . 4 3 , 
PAL-M, and PAL-N. P
 AL/SECAM/NTSC/NTSC4 .43/PAL-M/PAL-N
The  projector  automatically  detects  incoming  video 
signal, and adjusts itself to optimize its performance.
If  the  projector  cannot  reproduce  proper  video  image, 
it  is  necessary  to  select  a  specific  component  video 
s
ignal  format  among  480i,  575i,  480p,  575p,  7 0p, 
1035i, and 1080i. COMPONENT VIDEO SIGNAL FORMAT
Video or S-Video
Component
The  projector  automatically  detects  incoming  video 
system, and adjusts itself to optimize its performance.
When Video System is PAL-M or PAL-N, select system 
manually. Auto
Auto
AV System Menu (Video or S-Video)
AV System Menu (Component)
Move the pointer to a 
system and press the 
SELECT button. A
 V System Menu icon  
Selected system is  
displayed.
AV System Menu icon  
Selected system is 
displayed.
Move the pointer to a 
system and press the 
SELECT button.
 Note:
    The  AV  System  Menu  cannot  be  selected  when 
selecting RGB (Scart). 
						

							Video Input
37
S e l e c t  a n  i m a g e  l e v e l  a m o n g  D y n a m i c ,  S t a n d a r d , 
Cinema, Blackboard (Green), Image 1, Image , Image 
3,  and  Image  4  by  pressing  the  IMAGE  button  on  the 
remote control.
Normal picture level preset on this projector.
Picture level adjusted for the picture with fine tone. Standard
Cinema
Image 1 ~ 4
Image Level Selection 
Direct Operation
Blackboard (Green)
Picture  level  suitable  for  the  image  projected  on  a 
blackboard.  This is mainly effective on a green colored 
board, not truly effective on a black colored board.
Picture  level  suitable  for  viewing  picture  in  a  bright 
room. Dynamic
User preset image in the Image Adjust Menu (p.38, 39).
Press  the  MENU  button  to  display  the  On-Screen 
Menu.    Press  the  Point ◄►  buttons  to  move  the 
red framed pointer to the Image Select Menu icon.
P r e s s  t h e  P o i n t ▲ ▼  b u t t o n s  t o  m o v e  t h e  r e d 
framed pointer to the level that you want to set and 
then press the SELECT button.
Menu Operation
1
2
Normal picture level preset on this projector.
Standard
Picture level adjusted for the picture with fine tone.Cinema
Picture  level  suitable  for  the  image  projected  on  a 
blackboard. See above for further description.Blackboard (Green)
User preset image in the Image Adjust Menu (p.38, 39).
Image 1~4
Picture  level  suitable  for  viewing  picture  in  a  bright 
room.Dynamic
IMAGE button
Image 4
Blackboard (Green)
Remote Control
IMAGE button
Dynamic
Standard
Cinema
Image 1
Image 2
Image 3
The level being selected.
Image Select Menu
Image Select Menu icon
Move the red framed 
pointer to the level and 
press the SELECT button. 
						

							Video Input
38
Press  the  MENU  button  to  display  the  On-Screen 
Menu.    Press  the  Point ◄►  buttons  to  move  the 
red framed pointer to the Image Adjust Menu icon.
P r e s s  t h e  P o i n t ▲ ▼  b u t t o n s  t o  m o v e  t h e  r e d 
framed  pointer  to  the  item  that  you  want  to  adjust, 
a n d  t h e n  p r e s s  t h e  S E L E C T  b u t t o n .  T h e  l e v e l 
of  each  item  is  displayed.    Adjust  each  level  by 
pressing the Point 
◄►buttons.
Image Level Adjustment
1
2
Image Adjust Menu
Press  the  Point ◄  button  to  decrease  the  contrast  and 
the Point ► button to increase contrast. (From 0 to 63.)
Press  the  Point ◄  button  to  adjust  the  image  darker 
and  the  Point ►  button  to  adjust  the  image  brighter. 
(From 0 to 63.) Contrast
Brightness
Press the Point ◄ button to lighten the red tone and the 
Point ► button to deepen the red tone. 
(From 0 to 63.) White balance (Red)
Press  the  Point ◄  button  to  lighten  the  green  tone  and 
the Point ► button to deepen the green tone. 
(From 0 to 63.) White balance (Green)
Press  the  Point ◄  button  to  lighten  the  blue  tone  and 
the Point ► button to deepen the blue tone. 
(From 0 to 63.) White balance (Blue)
Press the Point ◄► buttons to select the desired Color 
temp. level.  (XLow, Low, Mid, or High)  Color temp  .
Press  the  Point ◄  button  to  lighten  the  color  and  the 
Point ► button to deepen the color. (From 0 to 63.)
Press  the  Point ◄►  buttons  to  obtain  a  proper  color.  
(From 0 to 63.) Color
Tint
 Note:
  • T h e  Ti n t  c a n n o t  b e  s e l e c t e d  w h e n  t h e  v i d e o 
system is PAL, SECAM, PAL-M, or PAL-N.
  •

  Afte r  a d j u sti n g  a n y  o f  th e  Wh i te  b a l a n ce  R e d , 
Green, or Blue, the Color temp. changes to "Adj.".
Press the Point ◄► buttons to adjust the 
value.
Press the SELECT 
button at this item to 
display other items.
Press the SELECT 
button at this item to 
display previous items.
Move the red framed  
pointer to the item to be 
selected and then press 
the SELECT button.
Image Adjust Menu icon 
						

							Video Input
39
To  reset  the  adjusted  data,  select  Reset  and  press 
the  SELECT  button.    The  confirmation  box  appears 
and  then  select  [Yes].    All  adjustments  returns  to  their 
previous figures.
Reset
Press the Point ◄► buttons to adjust the gamma value 
to obtain better balance of contrast. (From 0 to 15.) Gamma
Press  the  Point ◄  button  to  soften  the  image  and  the 
Point ► button to sharpen the image. (From 0 to 15.)
Sharpness
To  store  the  adjusted  data,  select  Store  and  press  the 
SELECT  button.    Select  a  level  from  Image  1  to  4  with 
the Point 
▲▼ buttons and press the SELECT button.  A 
confirmation box appears and then select [Yes].
Stored  data  can  be  called  up  by  selecting  "Image"  in 
the Image Level Selection on page 37.
Store
Exit the Image Adjust Menu.
Quit
 Note:
    N o i s e  r e d u c t i o n  a n d  P r o g r e s s i v e  c a n n o t  b e 
selected  when  480p,  575p,  70p,  1035i,  or  1080i 
is selected. (p.36)
I n t e r l a c e d   v i d e o   s i g n a l   c a n   b e   d i s p l a y e d   i n   a 
progressive picture.  Select one of the following.
 Of
f  . . . .  disabled.
  L1
. . . . .  Select "L1" for an active picture.
  L

 . . . . .  Select "L " for a still picture.
  Film
  . . .  Select  "Film"  for  watching  a  film.  With  this 
function,  the  projector  reproduces  pictures 
faithful to the original film quality.
Progressive
Noise  reduction
Noise  interference  on  the  screen  can  be  reduced.  
Select one of the following to get smoother images.
 
Of
f  . . . .  disabled.
  L1
. . . . .  lower reduction 
  L

 . . . . .  higher reduction  
Image Level Menu
Move the red framed pointer 
to an image item to be set 
and then press the SELECT 
button.
Store item
The confirmation box 
appears and then select 
[Yes]. 
						

							Video Input
40
This  projector  has  the  picture  screen  resize  function,  which  enables  you  to  customize  the  image 
size.
Press  the  MENU  button  to  display  the  On-Screen 
Menu.    Press  the  Point ◄►  buttons  to  move  the 
red framed pointer to the Screen Menu icon.
Press  the  Point ▲▼  buttons  and  move  the  red 
framed  pointer  to  the  function  that  you  want  to 
select and then press the SELECT button.
Provide the image at a wide screen ratio of 16:9. Wide
Provide the image at a normal video aspect ratio of 4:3.Normal
Screen Size Adjustment
 Note:
    S c r e e n  M e n u  c a n n o t  b e  o p e r a t e d  w h e n  7 0 p , 
1035i,  or  1080i  is  selected  in  the AV  System  Menu 
(p.36).
1
2
Move the red framed pointer to a 
function and press the SELECT 
button.
Screen Menu
Screen Menu icon