Eiki Projector Lc Xb21b User Manual

Setting
41
Blue back
Press  the  Point ◄►  buttons  to  switch  On/Off.    When 
this  function  is  "On",  a  blue  image  is  displayed  while 
the input signal is not detected. 
Keystone
Press  the  MENU  button  to  display  the  On-Screen 
Menu.    Press  the  Point ◄►  buttons  to  move  the 
red framed pointer to the Setting Menu icon.
Language
T h e   l a n g u a g e   u s e d   i n   t h e   O n - S c r e e n   M e n u   i s 
available  in  English,  German,  French,  Italian,  Spanish,...

Setting
4
Display
Press  the  Point ◄►  buttons  to  switch  On/Off.  This 
function decides to display On-Screen Displays.
On . . . . . . . . . . . . .  Show 
 all  the  On-Screen  Displays. 
Use  this  function  when  you  want 
to  project  images  after  the  lamp 
becomes  bright  enough.    Factory 
default setting is this mode.
Countdown off  . . .  S
how  the  input  image  instead  of 
the  countdown  when  turning  on 
the  projector.    Use  this  function 
w h e n  y o u  w a n t  t o  p...

Setting
43
Capture
This  function  enables  you  to  capture  the  image 
being  projected  and  use  it  for  a  start-up  display  or 
interval of presentations.
A f t e r  c a p t u r i n g  t h e  p r o j e c t e d  i m a g e ,  g o  t o  t h e 
Logo  select  function  and  set  it  to  "User".    Then 
the  captured  image  is  displayed  when  turning  on 
the  projector  next  time  or  pressing  the  NO  SHOW 
button. (p.
4) 
To  capture  the  image,  select  [Yes].    To  cancel...

Setting
44
To Enter the Logo PIN code
Select a number by pressing the Point ▲▼ buttons. 
And then press the Point ► button to fix the number 
and move the pointer.  The number changes to " ".  
If  you  fixed  an  incorrect  number,  move  the  pointer 
to  the  number  you  want  to  correct  by  pressing  the 
Point 
◄  button,  and  then  select  the  correct  number 
by pressing the Point ▲▼ buttons.
Repeat  this  step  to  complete  entering  a  four-digit 
number.
A f t e r  e n t e r i n...

Setting
45
Ceiling
When  this  function  is  "On",  the  picture  is  top/bottom 
and  left/right  reversed.   This  function  is  used  to  project 
the image from a ceiling mounting the projector.
Rear
When  this  function  is  "On",  the  picture  is  left/right 
reversed.   This  function  is  used  to  project  the  image  to 
a rear projection screen.
Ceiling 
Rear 
Input search
This  function  detects  the  input  signal  automatically. 
When  finding  a  signal,  the  search  will...

Setting
46
Power management
F o r   r e d u c i n g   p o w e r   c o n s u m p t i o n   a s   w e l l   a s 
maintaining  the  lamp  life,  the  Power  management 
f u n c t i o n  t u r n s  o f f  t h e  p r o j e c t i o n  l a m p  w h e n  t h e 
projector is not used for a certain period.
When  the  input  signal  is  interrupted  and  no  button  is 
pressed  for  more  than  30  seconds,  the  timer  display 
with "No signal" appears.  The countdown starts to turn 
off the lamp.
Select...

Setting
47
Remote control
This  projector  provides  two  different  remote  control 
codes:  the  factory-set  initial  code  (Code  1)  and  the  
secondary  code  (Code  ).    This  switching  function 
prevents  remote  control  interference  when  operating 
several  projectors  or  video  equipment  at  the  same 
time.
W
 hen  operating  the  projector  in  "Code  ",  both  the 
projector  and  the  remote  control  must  be  switched  to 
"Code 
 ".
To change the...

Setting
48
Key lock
Security (Key lock and PIN code lock settings)
T h i s  f u n c t i o n  a l l o w s  y o u  t o  u s e  K e y  l o c k  a n d  P I N 
code  lock  function  to  set  the  security  for  the  projector 
operation.
This  function  locks  operation  of  the  top  control  or 
the remote control.
It  is  useful  to  prevent  operation  by  an  unauthorized 
person.. . . . . . not locked.
. . . . . .  l
ock  the  operation  of  the  top 
c o n t r o l .  To  u n l o c k ,  u s e  t h e...

Setting
49
To Enter the PIN code
Select a number by pressing the Point ▲▼ buttons. 
And then press the Point ► button to fix the number 
and move the pointer.  The number changes to "".  
If  you  fixed  an  incorrect  number,  move  the  pointer 
to  the  number  you  want  to  correct  by  pressing  the 
Point 
◄  button,  and  then  select  the  correct  number 
by pressing the Point ▲▼ buttons.
Repeat  this  step  to  complete  entering  a  four-digit 
number. 
A f t e r  e n t e r i n g  t...

Setting
50
This  function  is  used  to  reset  the  lamp  replacement 
counter.  When replacing the projection lamp, reset the 
lamp  replacement  counter  by  using  this  function.    See 
page 55 for operation.Lamp counter 
Factory default
This  function  returns  all  setting  values  except  for  the 
user  logo,  PIN  code  lock,  Logo  PIN  code  lock,  and  the 
lamp counter to the factory default settings.
This  function  provides  the  following  alternatives  in  the 
cooling  fans'...