Eiki Projector Lc Xb200 User Manual

41

Video	Input
Video	System	Selection
1AV	System	Menu	(Video	or	S-video)
AV	System	Menu	(Component)

If	the 	projector 	cannot 	reproduce 	proper 	video 	image,	
select	 a	specific	 broadcast	 signal	format	 from	among	PAL,	
SECAM,	NTSC,	NTSC	4 .4,	PAL-M,	and	PAL-N.
PAL/SECAM/NTSC/NTSC4 .4/PAL-M/PAL-N
The	projector 	automatically 	detects 	an 	incoming 	video	
signal,	and	adjusts	itself	to	optimize	its	performance.
If	the	projector	cannot	reproduce	proper	video	image,	select	
a	specific...

4

Video	Input
Image	select	Menu
Select	the	desired	image	mode	 among	Dynamic,	Standard,	
Cinema,	Blackboard	(Green),	Colorboard,	Image	1,	
Image	,	Image		and	Image	4	by	pressing	the	IMAGE	
button	on	the	remote	control.
Standard
Picture	mode	adjusted	with	fine	tone.
Cinema
Blackboard	(Green)
Image	1–4
IMAGE	button
Dynamic
Cinema
Image	Mode	Selection	
For	the	image	projected	on	a	blackboard.
This	mode	help	enhance	the	image	projected	on	a	
blackboard.	This	is	mainly	effective	on	a	green...

4

Video	Input
Image	Adjustment
1

Press	the	Point	7	button	to	decrease	the	contrast;	press	the	
Point	8	button	to	increase	the	contrast	(from	0	to	63).
Press	the	Point	7	button	to	decrease	the	brightness;	press		
the	Point	8	button	to	increase	the	brightness	(from	0	to	63).
Contrast
Brightness
Press	the	Point	7	button	to	lighten	red	tone;	press	the	Point	
8	button	to	deepen	red	tone	(from	0	to	63).
white	balance	(Red)
Press	the 	Point 	7	button 	to 	lighten 	green 	tone; 	press 	the	
Point	8...

44

Video	Input
Use	the 	Point 	7  8	buttons 	to 	adjust 	the 	gamma 	value 	to	
obtain	a	better	balance	of	contrast	(from	0	to	15).
Gamma
Press	 the	Point	7	button	 to	decrease	 the	sharpness	 of	the	
image;	 press	the	Point	8	button	 to	increase	 the	sharpness	
of	the	image	(from	0	to	15).
Sharpness
An	interlaced	 video	signal	 can	be	displayed	 in	progressive	
mode.	Select	one	of	the	following	options.
	 Off	..........	Disabled.
	 L1	 ..........	For	an	active	picture.
	 L2	..........	For	a	still...

45

Video	Input
This	projector	has	the	picture	screen	resize	function,	which	enables	you	to	customize	the	image	size.
Normal
Screen	Size	Adjustment
Screen	Menu1

Provide	the	image	at	the	4:3	normal	video	aspect	ratio.
Custom
Adjust	the	screen	scale	and	position	manually	with	this	
function.
Press	the	Point	8 button	at	Custom	and	the	Custom	is	
displayed	on	the	screen,	you	can	use	the	Point	ed	buttons	
to	choose	the	item	you	want	to	adjust.
	Scale	H/V	..........	Adjust	the	Horizontal/Vertical	screen...

46

Language
The	language	used	in	the	On-Screen	Menu	is	available	in	
English,	German,	French,	Italian,	Spanish,	Portuguese,	
Dutch,	Swedish,	Finnish,	Polish,	Hungarian,	Romanian,	
Russian,	Chinese,	Korean,	japanese	and	Thai.
Setting	Menu
Setting
Setting
Press	the	MENU	button	to	display	the	On-Screen	
Menu.	Press	the	Point	ed	buttons	to	select	Setting	
and	press	the	Point	8	or	the	SELECT	button	to	access	
the	submenu	items.
1
Use	the	Point	ed	buttons	to	select	the	desired	item	
and	then	press	the...

47

Setting
✔ Note:
	 •	Auto	Keystone	corrects	vertical	distortion	only,	
not	correct	horizontal	distortion.
	 •	The	Auto	Keystone	function	cannot	work	when	
the	Ceiling	feature	is	set	On	in	the	Setting	menu	
(p.52).
	 •	Perfect	correction	of	the	image	distortion	cannot	
be	ensured	with	the	 Auto	setup	function.	If	the	
distortion	is	not	corrected	properly	by	pressing	the	
AUTO	SETUP	or	the	AUTO	SET 	button,	adjust	
manually	by	pressing	the	KEYSTONE	button	on	
the	remote	control	or	selecting	Keystone	in...

48

Keystone
This	function	is	used	to	store	or	reset	the	keystone	
correction	when	the	AC	power	cord	is	unplugged.	
	Store	.......	Keep 	the 	keystone 	correction 	even 	when 	the	
AC	power	cord	is	unplugged.
	Reset	.......	Release	 the	keystone	 correction	 when	the	AC	
power	cord	is	unplugged.
To	correct	keystone	distortion,	press	the	SELECT 	button.	
Keystone	appears	on	the	screen.	Use	the	Point	ed		
buttons	to	correct	keystone	distortion	(p.25).
Background
Select	the	background	screen	for	when	no...

49

Setting
Logo	(Logo	and	Logo	PIN	code	lock	settings)
Logo	selectThis	function	allows	you	to	customize	the	screen	logo	with	
Logo	select,	capture,	Logo	PIN	code	lock	and	Logo	PIN	
code	change	functions.
✔ Note:
			When	On	is	selected	in	the	Logo	PIN	code	lock	function,	
Logo	select	and	Capture	functions	cannot	be	selected.
Logo	select
This	function	decides	on	the	starting-up	display	from	
among	following	options.	
	User	........	Show	the	image	you	captured.		
	Default	....	Show	the	factory-set	logo....

50

Capture
Capture
This	function	enables	you	to	capture	an	image	being	
projected	to	use	it	for	a	starting-up	display	or	interval	of	
presentations.
Select	Capture	and	press	the	SELECT	button.		
A	confirmation	box	appears	and	select	yes	to	capture	the	
projected	image.
After 	capturing 	the 	projected 	image, 	go 	to 	the 	Logo 	select	
function	 and	set	it	to	User.	Then	 the	captured	 image	will	be	
displayed	the	next	time	you	turn	on	the	projector.
To	cancel	the	capture	function,	select	yes	in	the...