Eiki Projector Lc Xb200 User Manual

	 Network	Supported	
❏		 Wired	LAN
	 	 	 	100-Base-TX/10-Base-T
Refer	to	the	Owner's	Manuals	below	for	
details	about	network	function.
❏	 		Network	Set-up	and	Operation
❏	 		PJ	Network	Manager
Multimedia Projector
Owner's Manual
LC-XB100
LC-XB200
MODEL 



Features	and	Design
This	Multimedia	Projector	is	designed	with	the	most	advanced	technology	for	portability,	durability,	and	ease	of	use.	
This	projector	utilizes	built-in	multimedia	features,	a	palette	of	16.77	million	colors,	and	matrix	liquid	crystal	display	
(LCD)	technology.
◆	Compact	Design
	 This	projector	 is	designed	 compact	in	size	 and	weight.	
It	is	 easy	 to	carry	 and	installed	 anywhere	 you	wish	 to	
use.
◆	Simple	Computer	System	Setting
	 The	 projector	 has	the	Multi-scan...



Table	of	Contents
Trademarks
Each	name 	of 	corporations 	or 	products 	in 	this 	book 	is 	either 	a 	registered 	trademark 	or 	a 	trademark 	of 	its 	respective	
corporation.
Features	and	Design	  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
Table	of	Contents .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
To	the	Owner .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .4
Safety	Instructions .  .  .  .  .  .  .  .  .  .  .  .  .  ....

4

To	the	Owner
CAUTION:	 TO	REDUCE	THE	RISK	OF	ELECTRIC	
SHOCK,	DO	NOT	REMOVE	COVER	(OR	
BACK) .	NO	USER-SERVICEABLE	PARTS	
INSIDE	EXCEPT	LAMP	REPLACEMENT .	
REFER	SERVICING	TO	QUALIFIED	
SERVICE	PERSONNEL .
THIS	SYMBOL	INDICATES	THAT	DANGEROUS	VOLTAGE	CONSTITUTING	 A	RISK	OF	ELECTRIC	SHOCK	IS	PRESENT 	WITHIN	THIS	UNIT.
THIS	SYMBOL 	INDICATES	THAT	THERE	 ARE	IMPORTANT 	OPERATING	 AND	MAINTENANCE	INSTRUCTIONS	IN	 THE	OWNER'S	MANUAL 	WITH	THIS	UNIT.
CAUTION
RISK	OF	ELECTRIC	SHOCK
DO	NOT	OPEN
Before...

5

Safety	Instructions
All	the	 safety	 and	operating	 instructions	 should	be	read	
before	the	product	is	operated.
Read	 all	of	the	 instructions	 given	here	and	retain	 them	
for	later	 use.	Unplug	 this	projector	 from	AC	power	 supply	
before	 cleaning.	 Do	not	 use	 liquid	 or	aerosol	 cleaners.	
Use	a	damp	cloth	for	cleaning.
F o l l o w	a l l 	w a r n i n g s 	a n d 	i n s t r u c t i o n s 	m a r k e d 	o n 	t h e	
projector.
For	 added	 protection	 to	the	 projector	 during	a	lightning	
storm,...

6

Safety	Instructions
Openings	in	the	 cabinet	 are	provided	 for	ventilation.	 To	
ensure	reliable	 operation	 of	the	 product	 and	to	protect	 it	
from	overheating,	 these	openings	 must	not	be	blocked	
or	covered.	
	CAUTION
Hot	 air	is	exhausted	 from	the	exhaust	 vent.	When	 using	
or	installing 	the 	projector, 	the 	following 	precautions	
should	be	taken.	
–	Do	 not	put	any	 flammable	 object	or	spray	 can	near	 the	
projector,	hot	air	is	exhausted	from	the	air	vents.
–	Keep	the	exhaust	vent	at...

7

Safety	InstructionsCompliance
Federal	Communications	Commission	Notice
Note:	This	equipment	 has	been	 tested	 and	found	 to	comply	 with	the	limits	 for	a	Class	 B	digital	 device,	 pursuant	
to	Part	 15	of	the	 FCC	 Rules.	 These	limits	are	designed	 to	provide	 reasonable	 protection	against	harmful	
interference	 in	a	residential	 installation.	 This	equipment	 generates,	 uses,	and	can	radiate	 radio	frequency	
energy,	 and	if	not	 installed	 and	used	 in	accordance	 with	the	instructions,	 may...

8

Part	Names	and	Functions
①⑤③②
Front
Back
④
①	Infrared	Remote	Receiver
②	Zoom	Ring
③	Focus	Ring
④	Projection	Lens
⑤	Lens	Cap
	 (See	page	63	for	attaching.)
		
⑥	Speaker
⑦	Exhaust	Vents
		CAUTION
Hot	air	is	exhausted	from	the	exhaust	vent.	Do	not	put	heat-sensitive	objects	near	this	side.
⑧	Lamp	Cover
⑨	Air	Intake	Vent
⑩	Terminals	and	Connectors
⑪	Top	Controls	and	Indicators
⑫ LAN	Connection	Terminal
⑬ Power	Cord	Connector
⑭	Filters
⑮	Adjustable	Feet
✔Note:
⑫	LAN	Connection	Terminal	is	for	the	Network...

9

Part	Names	and	Functions
Rear	Terminal	
②③①④
⑥⑩⑦⑨⑧
⑤
⑥	S-VIDEO	IN
	 Connect	the	S-VIDEO	output	signal	from	video	
equipment	to	this	jack	(p.17).
⑨	AUDIO	IN
	 Connect	the	audio	output	signal	from	video	
equipment	connected	to	⑥	or	⑩	to	this	jack.	
For	a	mono	audio	signal	(a	single	audio	jack),	
connect	it	to	the	L	(MONO)	jack	(p.17).
⑧	COMPUTER	1	/	COMPUTER		 AUDIO	IN
	 Connect	the	audio	output	(stereo)	from	a	
computer	or	video	equipment	connected	to	②	
or	④	to	this	jack.	(16,	18)
⑩	VIDEO	IN...

10

Part	Names	and	Functions
Top	Control
⑨	LAMP	REPLACE	indicator
	 Lights	yellow	when	the	projection	lamp	reaches	its	
end	of	life	(pp.64,	72).
⑧	wARNING	indicator
	 –	Lights	red	when	the	projector	detects	an	abnormal	
condition.	
	 –	Blinks	red	when	the	internal	temperature	of	the	
projector	exceeds	the	operating	range	(pp.61,	72).
④	ON/STAND–By	button
Turn	the	projector	on	or	off	(pp.20-22).
⑤	POwER	indicator
	 –	Lights	red	when	the	projector	is	in	stand-by	mode.
	 –	Lights	green	during	operations....