Eiki Projector Lc Xb100 User Manual

71

Appendix
AutoPALSECAMNTSCNTSC	4.43PAL-MPAL-N
Video	Input
Auto1080i1035i720p575p480p575i480i
Dynamic
CinemaBlackboard	(Green)
Image	1Image	2Image	3
Normal
0–630–63
Off
Setting
Image	select
System	(2)
System	(3)
Image	AdjustContrastBrightnessColorTint
RedGreenBlueSharpness
ResetStore
Gamma
Progressive
0–630–630–630–15	0–15
Image	1
Screen
Yes/No
Image	4
LanguageSetting17	languages	provided.
Blue/User/BlackOff	/On/Countdown	offLogo	select
On/Off
On/Off
Ready
On/Off
Code	1–Code	8...

7

Check	the	indicators	for	projector	condition.																																			
•	•	•	green.•	•	•	red•	•	•	off
•	•	•	blinks	green.
When	the	projection	lamp	reaches	its	end	of	life,	the	LAMP	REPLACE	indicator	lights	yellow.	When	this	indicator	
lights	yellow,	replace	the	projection	lamp	with	a	new	one	promptly.
The	projector	is	off.	(The	AC	power	cord	is	unplugged.)
The	projector	is	in	stand-by	mode.	Press	the	ON/STAND-BY 	button	
to	turn	on	the	projector.
Projector	ConditionPOWERred/green...

7

Appendix
Compatible	Computer	Specifications
Basically	this	projector	can	accept	the	signal	from	all	computers	with	the	V-,	H-Frequency	mentioned	below	
and	less	than	140	MHz	of	Dot	Clock.
		When	selecting	these	modes,	PC	adjustment	can	be	limited.
ON-SCREEN	DISPLAyRESOLUTIONH-Freq .(KHz)V-Freq .(Hz)ON-SCREEN	DISPLAyRESOLUTIONH-Freq .(KHz)V-Freq .(Hz)
VGA	1640	x	48031.4759.88
VGA	2720	x	40031.4770.09
VGA	3640	x	40031.4770.09
VGA	4640	x	48037.8674.38
VGA	5640	x	48037.8672.81
VGA	6640	x...

74

ON-SCREEN DISPLAYRESOLUTIONH-Freq.(KHz)V-Freq.(Hz)ON-SCREEN DISPLAYRESOLUTIONH-Freq.(KHz)V-Freq.(Hz)
When the input signal is digital from DVI terminal, refer to the chart b\
elow.
✔ Note:
 •   When the input signal is D-SXGA 1, D-SXGA 2 or D-SXGA 3, images may not be displayed properly 
depending on computers.
  • The specifications are subject to change without notice.
Appendix
D-VGA640 x 48031.4759.94
D-480p640 x 48031.4759.88
D-720p1280 x 72037.5050.00
D-1035i1920 x 1035
D-1080i1920 x 1080...

75

Appendix
Technical	Specifications
Mechanical	Information		
	 Projector	Type	 Multi-media	Projector	
	 Dimensions	(W	x	H	x	D)	 12.80"	x		3.27"	x		9.12"	(326mm	x	83.1mm	x	231.6mm)		(Not	including	protrusions)	
	 Net	Weight	6.17	lbs	(2.8	kg)	
 Feet Adjustment  0˚ to 12˚           
	 		 	 	 	 	 	
Panel	Resolution		
	 LCD	Panel	System	0.63"	TFT	Active	Matrix	type,	3	panels		
	 Panel	Resolution	 1,024	x	768	dots	
	 Number	of	Pixels	2,359,296	(1,024	x	768	x	3	panels)...

76

Appendix
	 			Model	No.
COMPONENT-VGA	Cable	 		 :	AH-98771	
SCART-VGA	Cable	 		 :	AH-98881
The	parts	listed	below	are	optionally	available.	When	ordering	those	parts,	specify	the	item	name	and	Model	No.	
to	the	sales	dealer.
Optional	Parts
Accessories
	 Owner’s	Manual	(CD-ROM)
			Quick	Reference	Guide	&	Safety	Manual
	 AC	Power	Cord	
	 Remote	Control	and	Batteries	 	 	 	 	 	 	 	 	 	 	
	 VGA	Cable
	Lens	Cap	with	String		
	 PIN	Code	Label	
	 Network	 Application	(CD-ROM)
	Soft	Carrying	Case	
	 USB...

77

Appendix
This	projector	is	compliant	with	PJLink	Standard	Class	1	of	JBMIA	(Japan	Business	Machine	and	Information	
System	Industries	Association).	This	projector	supports	all	commands	defined	by	PJLink	Class	1	and	is	verified	
conformance	with	PJLink	Standard	Class	1.
For	PJ	Link	password,	see	the	owner’s	manual	of	“Network	Set-up	and	Operation.”
PJLink	is	a	registered	trademark	of	JBMIA 	and	pending	trademark	in	some	countries.
Pj	Link	Notice
Projector	Input
RGB
Computer	2	(Analog)
RGB	(AV	HDCP)...

78

Appendix
COMPUTER	IN	1	/COMPONENT	IN	/MONITOR	OUT	(ANALOG)
Terminal:	Analog	RGB	(Mini	D-sub	15	pin)
512341096781514131112
Configurations	of	Terminals
Red	(R/Cr)	Input/Output	 	
Ground	(Horiz.sync.)
Green	(G/Y)	Input/Output
-----
Blue	(B/Cb)	Input/Output
Ground	(Red)
Ground	(Green)
Ground	(Blue)
1
5

4

6
7
8
+5V	Power/-----
Horiz.	sync.	Input/Output	(Composite	H/V	sync.)
Ground	(Vert.sync.)
DDC	Data/-----
Ground/-----
Vert.	sync.
DDC	Clock/-----
9
1
10
1
11
14
15
RX	–
TX	+
TX	–...

79

AppendixAppendix
Write	down	the	PIN	code	number	in	the	column	below	and	keep	it	with	this	manual	securely.	If	you	forgot	or	lost	
the	number	and	unable	to	operate	the	projector,	contact	the	service	station.	
PIN	Code	Number	Memo
Factory	default	set	No:		1	2	3	4*
Factory	default	set	No:		4	3	2	1*
Put	the	label	 below	 (supplied)	 on	in	a	prominent	 place	of	the	
projector's	body	while	it	is	locked	with	a	PIN	code.
While	the	projector	is	locked	with	the	PIN	code.
PIN	Code	Lock	No .
Logo	PIN	Code...

80
Appendix
Dimensions
Unit:	mm(inch)
Screw	Holes	for	Ceiling	MountScrew:	M4Depth:	12.0(0.472)
93.5(3.68)232.5(9.15)
121.9(4.80)
109.7(4.32)
143.3(5.64)
9.5 (0.37)
101(3.98)
107.6(4.24)
219.4(8.64)
23(0.91)
55(2.17)
25(0.98)
51.9 (2.05)
80.5(3.17)12 MAXº
3.8 (0.15)
42.3 (1.67)
24.8 (0.98)40.8 (1.61)