Eiki Projector Lc Xb100 User Manual

1

Computer	Input
PC	System	Menu
PC	System	Menu
Computer	System	Selection
This	projector	automatically	tunes	to	various	types	of	computers	based	on	VGA,	SVGA,	XGA,	SXGA,	WXGA	
or	UXGA	with	its	Multi-scan	system	and	 Auto	PC	Adjustment.	If	a	computer	is	selected	as	a	signal	source,	this	
projector	automatically	detects	the	signal	format	and	tunes	to	project	a	proper	image	without	any	additional	
settings.	(Signal	formats	provided	in	this	projector	are	shown	on	pages	73-74.)
One	of	the	following...



Computer	Input
Auto	PC	Adjustment	function	is	provided	to	automatically	adjust	Fine	sync,	Total	dots,	Horizontal	and	Vertical	
positions	to	conform	to	your	computer.
PC	adjust	Menu
Auto	PC	 Adjustment
To	store	adjustment	parameters
The	adjusted	parameters	from	the	 Auto	PC	Adjustment	can	
be	stored	in	the	projector.	Once	the	parameters	are	stored,	
the	setting	can	be	done	just	by	selecting	a	Mode	(1–5)	in	
the	PC	System	Menu	(see	page	31).	See	also	“Store”	on	
page	34.
✔ Note:
	 •	Fine	sync,...



Computer	Input
PC	adjust	Menu
Manual	PC	Adjustment
Some	computers	 employ	special	signal	formats	 which	may	not	be	tuned	 by	Multi-scan	 system	of	this	 projector.		
Manual	 PC	Adjustment	 enables	you	to	precisely	 adjust	several	 parameters	 to	match	 those	signal	 formats.	 The	
projector	has 	five 	independent 	memory 	areas 	to 	store 	those 	parameters 	manually 	adjusted. 	It 	allows 	you 	to	
recall	the	setting	for	a	specific	computer.	
1

Use	the	Point	7 8	buttons	to	adjust	the...

4

Computer	Input
Store
To	store	 the	adjusted	 data,	select	Store	and	 then	press	 the	
Point	8	or	 the	 SELECT 	button.	 Move	 the	highlight	 to	one	 of	
the	Modes	 1	to	 5	in	 which	 you	want	 to	store,	 and	then	 press	
the	SELECT 	button.
Mode	free
To	clear	 the	stored	 data,	select	Mode	 free	and	 then	 press	
the	Point	8	or	 the	 SELECT 	button.	 Move	the	highlight	 to	the	
Mode 	that 	you 	want 	to 	clear 	and 	then 	press 	the 	SELECT 	
button.
✔ Note:
	 •	Display	 area	(H/V)	cannot	 be...

5

Computer	InputComputer	Input
Image	select	Menu
IMAGE	button
Dynamic
Real
Image	1
Image	
Image	
Image	Mode	Selection	
Image	4
Blackboard(Green)
Standard
Remote	Control
Select	the	desired	image	mode	 among	Dynamic,	Standard,	
Real,	Blackboard	(Green),	Colorboard,	Image	1,	Image	,	
Image		and	Image	 4	by	 pressing	 the	IMAGE	 button	on	the	
remote	control.
Standard
Picture	mode	with	improved	halftone	for	graphics.
Real
Blackboard	(Green)
Image	1–4
For	the	image	projected	on	a...

6

Computer	Input
Image	Adjust	Menu
Image	Adjustment
Reset
Press	the	MENU	button	to	display	the	On-Screen	
Menu.	Use	the	Point	ed	buttons	to	select	Image	
adjust	and	then	press	the	Point	8 or	the	SELECT 	
button.
1
Use	the	Point	ed	buttons	select	the	desired	item	
and	then	press	the	SELECT 	button	to	display	the	
adjustment	dialog	box.	Use	the	Point	7 8	buttons	to	
adjust	the	setting	value.
✔ Note:
•	When	White	balance	Red,	Green	or	Blue	is		
		adjusted,	Color	temp .	will	change	to	User.
•...

7

Computer	Input
Store
This	projector	has	the	picture	screen	resize	function,	which	
enables	you	to	customize	the	image	size.Screen	Menu
Screen	Size	Adjustment
Provide	the	image	to	fit	the	screen	size.
Normal
True
Provide	the	image	in	its	original	size.	When	the	original		
image	size	is	larger	or	smaller	than	the	screen	size	
(1024	x		768),	the	projector	enters	to	the	panning		mode		
automatically.	Use	the	Point	ed7 8 buttons	to	pan	the	
image.	When	adjusted,	the	arrows	will	turn	red.	When...

8

Computer	Input
Select	Digital	zoom	+.	The	 On-Screen	 Menu	disappears	 and	
D .	zoom	 +	appears.	 Press	the	SELECT 	button	 to	expand	 the	
image	size.	Use	the	Point	ed7 8	buttons	 to	pan	 the	image.	
The	Panning	function	can	work	only	when	the	image	is	larger	
than	the	screen	size.
A	projected 	image 	can 	be 	also 	expanded 	by 	pressing 	the	
D.ZOOM	e	or	the	SELECT 	button	on	the	remote	control.	
To	exit	the	Digital	zoom	+/–	mode,	press	any	button	except	
the	D.ZOOM		ed	buttons,	SELECT 	and...

9

Choose	Video	or	S-video	by	 pressing	 the	INPUT 	button	 on	
the	top	control	or	the	VIDEO		button	on	the	remote	control.
Before	 using	these	 buttons,	 correct	input	source	 should	be	
selected	through	menu	operation	as	described	below.
1

Input	Menu
Input	Source	Selection	(Video,	S-video)
Video	Input
Direct	Operation
Menu	Operation
When	video 	input 	signal 	is 	connected 	to 	the	
VIDEO	jack,	select	Video.Video
When	 video	input	signal	 is	connected	 to	the	 S-
VIDEO	jack,	select...

40

Video	Input
Choose	Computer	1(Component)	or	Computer	1(Scart)	by	pressing	the	INPUT	button	on	the	top	control	or	
press	the	COMPUTER	button	on	the	remote	control.
Before	using	these	buttons,	correct	input	source	should	be	selected	through	Menu	operation	as	described	
below.
1
Input	Menu
Use	the	Point	ed	buttons	to	select	Computer	1	and	
then	press	the	Point	8	button.
Input	Source	Selection	(Component,	RGB	Scart	1-pin)
When	the	input	source	is	coming	from	video	
equipment	connected	to	the...