Eiki Projector Lc Xb100 User Manual
Have a look at the manual Eiki Projector Lc Xb100 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 422 Eiki manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
1 Computer Input PC System Menu PC System Menu Computer System Selection This projector automatically tunes to various types of computers based on VGA, SVGA, XGA, SXGA, WXGA or UXGA with its Multi-scan system and Auto PC Adjustment. If a computer is selected as a signal source, this projector automatically detects the signal format and tunes to project a proper image without any additional settings. (Signal formats provided in this projector are shown on pages 73-74.) One of the following messages may appear when: The projector cannot recognize the connected signal conforming to the provided PC Systems. Auto is displayed on the System Menu box and the Auto PC Adjustment function works to display proper images. If the image is not projected properly, a manual adjustment is required (pp.33-34). There is no signal input from the computer. Check the connection between your computer and the projector. (See “Troubleshooting” on p.67.) Auto ----- The preset system is manually adjusted in the PC adjust Menu. The adjusted data can be stored in Mode 1–5 (pp.33-34). Mode 1 PC Systems provided in this projector is chosen. The projector chooses a proper system provided in the projector and displays it. SVGA 1 *Mode 1 and SVGA 1 are examples. 1 PC system can also be selected manually. Selecting Computer System Manually Press the MENU button to display the On-Screen Menu. Use the Point ed buttons to select Input and then press the Point 8 or the SELECT button. Use the Point ed buttons to select System and then press the Point 8 or the SELECT button. Use the Point ed buttons to select the desired system and then press the SELECT button. RGB(PC digital) The PC System Menu Selected system is displayed. RGB(Computer 1) Systems in this dialog box can be selected. Customized Mode (1–5) set in the PC adjust Menu (pp.33-34).
Computer Input Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal and Vertical positions to conform to your computer. PC adjust Menu Auto PC Adjustment To store adjustment parameters The adjusted parameters from the Auto PC Adjustment can be stored in the projector. Once the parameters are stored, the setting can be done just by selecting a Mode (1–5) in the PC System Menu (see page 31). See also “Store” on page 34. ✔ Note: • Fine sync, Total dots, Horizontal and Vertical position of some computers cannot be fully adjusted with the Auto PC Adjustment function. When the image is not provided properly with this operation, manual adjustments are required (pp.33-34). • The Auto PC Adjustment cannot be operated when 480i, 575i, 480p, 575p, 70p,105i or 1080i is selected in the PC System Menu (p.31). Press the MENU button to display the On-Screen Menu. Use the Point ed buttons to select PC adjust and then press the Point 8 or the SELECT button. 1 Use the Point ed buttons to select Auto PC adj . and then press the SELECT button. Auto PC adj . Menu Operation Use Point ed buttons to select Auto PC adj . and press the SELECT button. Please wait . . . appears while the Auto PC adjustment is in process. Computer Input
Computer Input PC adjust Menu Manual PC Adjustment Some computers employ special signal formats which may not be tuned by Multi-scan system of this projector. Manual PC Adjustment enables you to precisely adjust several parameters to match those signal formats. The projector has five independent memory areas to store those parameters manually adjusted. It allows you to recall the setting for a specific computer. 1 Use the Point 7 8 buttons to adjust the value, eliminating a flicker from the image displayed (from 0 to 31). Fine sync Use the Point 7 8 buttons to adjust the number of total dots in one horizontal period to match your PC image. Total dots Use the Point 7 8 buttons to adjust the horizontal picture position. Horizontal Use the Point 7 8 buttons to adjust the vertical picture position. Vertical Use the Point 7 8 buttons to adjust the clamp level. When the image has dark bars, try this adjustment. Clamp Press the MENU button to display the On-Screen Menu. Use the Point ed buttons to select PC adjust and then press the Point 8 or the SELECT button. Use the Point ed buttons to select the desired item and then press the SELECT button to display the adjustment dialog box. Use the Point 7 8 buttons to adjust the setting value. Use the Point 7 8 buttons to adjust the vertical area displayed by this projector. Display area V Use the Point 7 8 buttons to adjust the horizontal area displayed by this projector. Display area H
4 Computer Input Store To store the adjusted data, select Store and then press the Point 8 or the SELECT button. Move the highlight to one of the Modes 1 to 5 in which you want to store, and then press the SELECT button. Mode free To clear the stored data, select Mode free and then press the Point 8 or the SELECT button. Move the highlight to the Mode that you want to clear and then press the SELECT button. ✔ Note: • Display area (H/V) cannot be selected when 480i, 575i, 480p, 575p, 70p, 105i or 1080i is selected in the PC System Menu (p.31). • PC adjust Menu cannot be selected when Computer (PC digital) and Computer (AV HDCP) are selected in the Input Menu (p.30). • When input computer signal to the projector, PC adjust will become available. Reset To reset the adjusted data, select Reset and press the Point 8 or the SELECT button. A confirmation box appears and then select yes. All adjustments will return to their previous figures. This Mode has stored parameters. Values of Total dots, Horizontal, Vertical, Display area H, and Display area V. Vacant Press SELECT button to store adjusted data Press MENU button to close this dialog box. Mode free Store
5 Computer InputComputer Input Image select Menu IMAGE button Dynamic Real Image 1 Image Image Image Mode Selection Image 4 Blackboard(Green) Standard Remote Control Select the desired image mode among Dynamic, Standard, Real, Blackboard (Green), Colorboard, Image 1, Image , Image and Image 4 by pressing the IMAGE button on the remote control. Standard Picture mode with improved halftone for graphics. Real Blackboard (Green) Image 1–4 For the image projected on a blackboard. This mode helps enhance the image projected on a blackboard. This is mainly effective on a green colored board, not truly effective on a black colored board. Dynamic Direct Operation For viewing pictures in a bright room. Normal picture mode preset on the projector. For viewing with the user preset image mode in the Image Adjust Menu (see pages 36-37). This Image memory is provided in each computer, component, S-video and video input source. 1 Menu Operation Colorboard Colorboard At the time of simple projection on the colored wall, you can get the close color image to the color image projected on a white screen by selecting the similar color to the wall color from the preset four colors. Press the MENU button to display the On-Screen Menu. Use the Point ed buttons to select Image select and then press the Point 8 or the SELECT button. Use the Point ed buttons to select the desired item and then press the SELECT button. IMAGE button
6 Computer Input Image Adjust Menu Image Adjustment Reset Press the MENU button to display the On-Screen Menu. Use the Point ed buttons to select Image adjust and then press the Point 8 or the SELECT button. 1 Use the Point ed buttons select the desired item and then press the SELECT button to display the adjustment dialog box. Use the Point 7 8 buttons to adjust the setting value. ✔ Note: • When White balance Red, Green or Blue is adjusted, Color temp . will change to User. • When Blackboard(Green) or Colorboard is selected in Image select, Color temp . will change to Blackboard or Colorboard. Press the Point 7 button to decrease the contrast; press the Point 8 button to increase the contrast (from 0 to 63). Press the Point 7 button to decrease the brightness; press the Point 8 button to increase the brightness (from 0 to 63). Contrast Brightness Press the Point 7 button to lighten red tone; press the Point 8 button to deepen red tone (from 0 to 63). white balance (Red) Press the Point 7 button to lighten green tone; press the Point 8 button to deepen green tone (from 0 to 63). white balance (Green) Press the Point 7 button to lighten blue tone; press the Point 8 button to deepen blue tone (from 0 to 63). white balance (Blue) Use the Point 7 8 buttons to select the desired Color temp. level (XLow, Low, Mid, or High). Color temp . Use the Point 7 8 buttons to adjust the gamma value to obtain a better balance of contrast (from 0 to 15). Gamma Press the Point 7 button to decrease the sharpness of the image; press the Point 8 button to increase the sharpness of the image (from 0 to 15). Sharpness To reset the adjusted data, select Reset and press the SELECT button. A confirmation box appears and then select yes. All adjustments will return to their previous figures. Use the Point 7 8 buttons to adjust the setting value. Selected Image mode
7 Computer Input Store This projector has the picture screen resize function, which enables you to customize the image size.Screen Menu Screen Size Adjustment Provide the image to fit the screen size. Normal True Provide the image in its original size. When the original image size is larger or smaller than the screen size (1024 x 768), the projector enters to the panning mode automatically. Use the Point ed7 8 buttons to pan the image. When adjusted, the arrows will turn red. When reached to the correction limits, the arrows will disappear. Full Provide the full screen image. ✔ Note: • The Screen Menu, except for Normal and Custom, cannot be operated when 70p(HDTV), 105i (HDTV), or 1080i (HDTV) is selected in the PC System Menu (p.31). • This projector cannot display any resolution higher than 1600 x 1200. If your computer’s screen resolution is higher than it, reset the resolution to the lower before connecting to the projector. • The image data in other than 1024 x 768 is modified to fit the screen size in initial mode. • True, Full, and Digital zoom +/– cannot be selected when 480i, 575i, 480p or 575p is selected in the PC System Menu (p.31). 1 To store the adjusted data, select Store and press the Point 8 or the SELECT button. Use the Point ed buttons to select one from Image 1 to 4 and press the SELECT button. A confirmation box appears and then select yes. Stored data can be called up by selecting an Image (1–4) in the Image Mode Selection on page 35. w ide Provide the image to fit the wide video aspect ratio (16:9) by expanding the image width uniformly. This function can be used for providing a squeezed video signal at 16:9. Press the MENU button to display the On-Screen Menu. Use the Point ed buttons to select Screen and then press the Point 8 or the SELECT button. Use the Point ed buttons select the desired item and then press the SELECT button . A confirmation box appears and then select yes.
8 Computer Input Select Digital zoom +. The On-Screen Menu disappears and D . zoom + appears. Press the SELECT button to expand the image size. Use the Point ed7 8 buttons to pan the image. The Panning function can work only when the image is larger than the screen size. A projected image can be also expanded by pressing the D.ZOOM e or the SELECT button on the remote control. To exit the Digital zoom +/– mode, press any button except the D.ZOOM ed buttons, SELECT and Point buttons. Digital zoom + Select Digital zoom –. The On-Screen Menu disappears and D . zoom – appears. Press the SELECT button to compress image size. The projected image can be also compressed by pressing the D.ZOOM d or the SELECT button on the remote control. Digital zoom – To return to the previous screen size, select a screen size from the Screen Size Adjustment Menu or select an input source from the Input Source Selection Menu (see pages 29-30) again, or adjust the screen size with the D.ZOOM ed buttons. For zooming in and out the images ✔ Note: • The panning function may not operate properly if the stored Mode in the PC adjust Menu is used (p.34). • The minimum compression ratio is limited depending on the input signal, when the Keystone function is working or when the custom is selected for the screen size. • True, Full, and Digital zoom +/– cannot be selected when 480i, 575i, 480p or 575p is selected in the PC System Menu (p.31). • Digital zoom +/- cannot be selected when Full or True is selected. • When Custom is selected, the Digital zoom - function is disabled. Adjust the screen scale and position manually with this function. Press the Point 8 button at Custom and the Custom is displayed on the screen, you can use the Point ed buttons to choose the item you want to adjust. Scale H/V .......... Adjust the Horizontal/Vertical screen scale. H&V ................... When set to On, the aspect ratio is fixed. The Scale V appears dimmed and becomes unavailable. Adjust Scale H, then the screen scale is automatically modified based on the aspect ratio. Position H/V ..... Adjust the Horizontal/Vertical screen position. Common ........... Save the adjusted scale or position to all the inputs. Press the SELECT button at Common to display a confirmation box. To save the scale or position, press the SELECT button at yes. When Custom is selected, the saved scale or position is used. Reset ................. Reset the all adjusted values. Press the SELECT button at Reset to display a confirmation box. To reset, press the SELECT button at yes. Custom ✔ Note: • When no signal is detected, Normal is set automatically and the Aspect dialog box disappears. • The adjustable range for Scale H/V and Position H/V is limited depending on the input signal. Remote Control D .ZOOM + button POINT buttons SELECT button D .ZOOM - button
9 Choose Video or S-video by pressing the INPUT button on the top control or the VIDEO button on the remote control. Before using these buttons, correct input source should be selected through menu operation as described below. 1 Input Menu Input Source Selection (Video, S-video) Video Input Direct Operation Menu Operation When video input signal is connected to the VIDEO jack, select Video.Video When video input signal is connected to the S- VIDEO jack, select S-video.S-video ✔ Note: When the Input Search function is set to On1 or On in the Auto setup function, the input signal will be searched automatically (p.47). Top ControlINPUT button Press the MENU button to display the On-Screen Menu. Use the Point ed buttons to select Input and then press the Point 8 or the SELECT button. Use the Point ed buttons to select either Video or S-video and then press the SELECT button. RGB(PC digital) Video Computer (PC digital) / (AV HDCP) / (Analog) S-video Computer 1 ( RGB) /(Component) / (Scart) Remote Control VIDEO button Video S-video
40 Video Input Choose Computer 1(Component) or Computer 1(Scart) by pressing the INPUT button on the top control or press the COMPUTER button on the remote control. Before using these buttons, correct input source should be selected through Menu operation as described below. 1 Input Menu Use the Point ed buttons to select Computer 1 and then press the Point 8 button. Input Source Selection (Component, RGB Scart 1-pin) When the input source is coming from video equipment connected to the COMPUTER IN 1/COMPONENT IN terminal with a Component-VGA Cable, select Component. Component When the input source is coming from video equipment connected to the COMPUTER IN 1/COMPONENT IN terminal with a Scart- VGA Cable, select RGB (Scart). RGB (Scart) Direct Operation Menu Operation Press the MENU button to display the On-Screen Menu. Use the Point ed buttons to select Input and then press the Point 8 or the SELECT button. ✔ Note: When the Input Search function is set to On1 or On, the input signal will be searched automatically (p.47). Top Control Use the Point ed buttons to select Component or RGB(Scart) and then press the SELECT button. RGB(PC digital) RGB(PC digital) INPUT button Video Computer (PC digital) / (AV HDCP) / (Analog) S-video Computer 1 ( RGB) /(Component) / (Scart)COMPUTER button Remote Control Computer (PC digital) / (AV HDCP) / (Analog) Computer 1 ( RGB) /(Component) / (Scart)