Eiki Projector Lc Xa20 User Manual

31
Computer Input
Press  the  MENU  button  to  display  the  On-Screen Menu.    Press  the  Point 7  8  buttons  to  move  the red framed pointer to the Image Adjust Menu icon.
P r e s s  t h e  P o i n t e d  b u t t o n s  t o  m o v e  t h e  r e d framed  pointer  to  the  item  that  you  want  to  adjust, and  then  press  the  SELECT  button.    The  level of  each  item  is  displayed.    Adjust  each  level  by pressing the Point 7 8 buttons.
Image Level Adjustment
1
2
Move the red framed...

Computer Input
3
Store
Exit the Image Adjust Menu.
Quit
To  store  the  adjusted  data,  select  Store  and  press  the SELECT  button.    Select  a  level  from  Image  1  to  4  with the Point ed buttons and press the SELECT button.  A confirmation box appears and then select [Yes].Stored  data  can  be  called  up  by  selecting  "Image"  in the Image Level Selection on page 30.
This  projector  has  the  picture  screen  resize  function,  which  enables  you  to  customize  the  image...

Computer Input
33
When  the  D.ZOOM  +  (e)  is  pressed,  the  On-Screen M e n u  d i s a p p e a r s  a n d  t h e  m e s s a g e  " D .  z o o m  + " is    displayed.    Press  the  D.ZOOM e or the  SELECT button  to  expand  the  image  size.   And  press  the  Point ed  7  8  b u t t o n s  t o  p a n  t h e  i m a g e .    T h e  P a n n i n g function  can  work  only  when  the  image  is  larger  than the screen size.
Digital zoom +
W h e n  D . Z O O M  –  (d) i s  p r e s s e d ,  t h...

Video Input
34
Choose Video by pressing the INPUT button on the top control or the VIDEO button on the remote control.Before using these buttons, correct input source should be  selected  through  menu  operation  as  described below.
Input Source Selection (Video)
Direct Operation
Video
INPUT button
Remote Control 
Top ControlINPUT button
VIDEO button
Computer 
Press  the  MENU  button  to  display  the  On-Screen Menu. Press the Point 7 8 buttons to move the red framed pointer to the Input Menu icon....

Computer
Video Input
35
COMPUTER button
INPUT button
Remote Control 
Top ControlINPUT button
COMPUTER button
Computer 
Choose  Computer  by  pressing  the  INPUT  button  on the  top  control  or  press  the  COMPUTER  button  on  the remote control.Before using these buttons, correct input source should be  selected  through  Menu  operation  as  described below.
Input Source Selection (S-Video, Component, RGB Scart 21-pin)
Direct Operation
Press  the  Point ed buttons  to move  the  red  arrow pointer...

Video Input
36
Press  the  MENU  button  to  display  the  On-Screen Menu.    Press  the  Point 7  8  buttons  to  move  the red framed pointer to the AV System Menu icon.
Video System Selection
Press  the  Point ed buttons  to move  the  red  arrow pointer  to  the  system  that  you  want  to  select  and then press the SELECT button.
1
2
If  the  projector  cannot  reproduce  proper  video  image, it  is  necessary  to  select  a  specific  broadcast  signal f o r m a t  a m o n g  PA L ,  S E C A M...

Video Input
37
S e l e c t  a n  i m a g e  l e v e l  a m o n g  D y n a m i c ,  S t a n d a r d , Cinema, Blackboard (Green), Image 1, Image , Image 3,  and  Image  4  by  pressing  the  IMAGE  button  on  the remote control.
Normal picture level preset on this projector.
Picture level adjusted for the picture with fine tone.
Standard
Cinema
Image 1 ~ 4
Image Level Selection 
Direct Operation
Blackboard (Green)
Picture  level  suitable  for  the  image  projected  on  a blackboard.  This is...

Video Input
38
Press  the  MENU  button  to  display  the  On-Screen Menu.    Press  the  Point 7  8  buttons  to  move  the red framed pointer to the Image Adjust Menu icon.
P r e s s  t h e  P o i n t e d  b u t t o n s  t o  m o v e  t h e  r e d framed  pointer  to  the  item  that  you  want  to  adjust, and  then  press  the  SELECT  button.    The  level of  each  item  is  displayed.    Adjust  each  level  by pressing the Point 7 8 buttons.
Image Level Adjustment
1
2
Image Adjust Menu
Press...

Video Input
39
To  reset  the  adjusted  data,  select  Reset  and  press the  SELECT  button.    The  confirmation  box  appears and  then  select  [Yes].    All  adjustments  returns  to  their previous figures.
Reset
Press the Point 7 8 buttons to adjust the gamma value to obtain better balance of contrast. (From 0 to 15.)
Gamma
Press  the  Point 7  button  to  soften  the  image  and  the Point 8 button to sharpen the image. (From 0 to 15.)
Sharpness
To  store  the  adjusted  data,  select  Store...

Video Input
40
This  projector  has  the  picture  screen  resize  function,  which  enables  you  to  customize  the  image size.
Press  the  MENU  button  to  display  the  On-Screen Menu.    Press  the  Point 7  8  buttons  to  move  the red framed pointer to the Screen Menu icon.
Press  the  Point ed  buttons  and  move  the  red framed  pointer  to  the  function  that  you  want  to select and then press the SELECT button.
Provide the image at a wide screen ratio of 16:9.
Wide
Provide the image at...