Eiki Projector Lc Xa20 User Manual

Basic Operation
1
Menu Bar
PC System Menu
Used to select computer system. (p.6)
Setting Menu
Used to set the projector's operating configurations.(p.41-50)
Image Select Menu
Used to select an image level among Dynamic, Standard, Real, Blackboard (Green), and Image 1 ~ 4. (p.30)
For computer source
Guide Window
Show the selected Menu of the On-Screen Menu.
Screen Menu
Used to adjust size of image. [Normal / True / Wide / Full screen / Digital zoom +/–] (p.3, 33)
For detailed functions,...

Basic Operation

P r e s s  t h e  Z O O M  + / -  b u t t o n s  o n  t h e  t o p  c o n t r o l  t o adjust  the  screen  size.    Screen  size  can  be  adjusted 80% to 100% from it's maximum screen size.
It is not available when On-Screen menu is displayed.
Zoom adjustment can be memorized.  (p.41)
Zoom Adjustment
Focus Ring
If  a  projected  picture  has  keystone  distortion,  correct the image with Keystone adjustment.  It is not available when On-Screen menu is displayed.
Press...

Basic Operation
3
Press the VOLUME+/– buttons on the remote control to adjust  the  volume.   The  volume  dialog  box  appears  on the screen for a few seconds.
Press the MUTE button on the remote control to cut off the  sound.    To  restore  the  sound  to  its  previous  level, press  the  MUTE button  again  or  press  the  VOLUME +/– buttons.Mute function is also effective for AUDIO OUT jack.
Volume
Mute
Direct Operation
Sound Adjustment
1
2
Press  the  MENU  button  to  display  the...

Basic Operation
4
black out ➜ the captured image ➜ normal ➜ • • • • •
Press  the  NO  SHOW  button  on  the  remote  control  to black  out  the  image.    To  restore  to  normal,  press  the NO  SHOW  button  again  or  press  any  other  button.  When  a  projected  image  is  captured  and  set  as  "User" in  the  Logo  selection  (p.4),  the  screen  changes  each time you press the NO SHOW button as follows.
NO SHOW button
Press  the  AUTO  PC  button  on  the  remote  control...

Computer Input 
5
Computer Input
Choose  Computer  by  pressing  the  INPUT  button on  the  top  control  or  press  the  COMPUTER  button on  the  remote  control.    Before  using  these  buttons, correct input source should be selected through Menu operation as described below.
Input Source Selection
Direct Operation
INPUT button
Remote Control
Top ControlINPUT button
COMPUTER button
Computer  
Video
Input Menu
Move the pointer (red arrow) to Computer and press the SELECT button.
Input Menu...

Computer Input
6
Computer System Selection
This  projector  automatically  tunes  to  various  types  of  computers  based  on  VGA,  SVGA,  XGA, SXGA,  WXGA,  or  UXGA  with  its  Multi-scan  system  and  Auto  PC  Adjustment.    If  Computer  is selected  as  a  signal  source,  this  projector  automatically  detects  the  signal  format  and  tunes  to project  a  proper  image  without  any  additional  setting.  (Signal  formats  provided  in  this  projector  is shown on page 61.)
One of the...

Computer Input
7
Auto  PC  Adjustment  function  is  provided  to  automatically  adjust  Fine  sync,  Total  dots,  Horizontal, and Vertical to conform to your computer. Auto PC Adjustment function can be operated as follows.
Auto PC Adjustment
The  Auto  PC  adjustment  function  can  be  operated directly by pressing the AUTO PC button on the remote control unit.
Direct OperationRemote Control 
AUTO PC button
Press  the  MENU  button  to  display  the  On-Screen Menu.    Press  the  Point 7  8...

Computer Input
8
Press  the  MENU  button  to  display  the  On-Screen Menu.    Press  the  Point 7  8  buttons  to  move  the red framed pointer to the PC Adjust Menu icon.
P r e s s  t h e  P o i n t e d  b u t t o n s  t o  m o v e  t h e  r e d framed    pointer  to  the  item  that  you  want  to  adjust a n d  t h e n  p r e s s  t h e  S E L E C T  b u t t o n  t o  d i s p l a y the  adjustment  dialog  box.    Press  the  Point 7  8 buttons to adjust the value.
Manual PC Adjustment
Some...

Computer Input
Press  the  Point 7  8  buttons  to  adjust  the  horizontal area displayed by this projector.
Display area H
Press  the  Point 7  8  buttons  to  adjust  the  vertical  area displayed by this projector.
Display area V
Reset
Store
Exit the PC Adjust Menu.
Quit
To  store  the  adjusted  data,  select  Store  and  press  the SELECT  button.    Move  the  red  arrow  pointer  to  any  of Mode 1 to 5 in which you want to store and then press the SELECT button.
To  reset  the  adjusted  data,...

30
Computer Input
Select an image level among Dynamic, Standard, Real, Blackboard  (Green),  Image  1,  Image ,  Image  3,  and Image  4  by  pressing  the  IMAGE  button  on  the  remote control.
Normal picture level preset on this projector.
Picture level with improved halftone for graphics.
Standard
Real
Image 1 ~ 4
Image Level Selection 
Direct Operation
Blackboard (Green)
Picture  level  suitable  for  the  image  projected  on  a blackboard.    This  mode  assists  to  enhance  the  image...