Eiki Projector Lc Xa20 User Manual

Multimedia Projector
Owner's Manual
LC-XA20MODEL 


Features and Design
This  Multimedia  Projector  is  designed  with  the  most  advanced  technology  for  portability,  durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology.
✔ Note: • The On-Screen Menu and figures in this manual may differ slightly from the product.
 • The contents of this manual are subject to change without notice.
◆ Compact Design
  This  projector  is  designed...

Table of Contents
3
TrademarksEach name of corporations or products in this book is either a registered trademark or a trademark of its respective corporation.
Features and Design  .  .  .  .  .  .  .  .  .  .  .  .  .2
Table of Contents .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .3
To the Owner .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .4
Safety Instructions .  .  .  .  .  .  .  .  .  .  .  .  .  . .5
Air Circulation  6
Installing the Projector in Proper   
  Position 6
Moving the...

4
To the Owner
Before  operating  this  projector,  read  this  manual thoroughly and operate the projector properly.This projector provides many convenient features and functions.    Operating  the  projector  properly  enables you  to  manage  those  features  and  maintains  it  in better condition for a considerable time.Improper  operation  may  result  in  not  only  shortening the  product-life,  but  also  malfunctions,  fire  hazard,  or other accidents.I f  y o u r  p r o j e c t o r  s e e m...

5
All the safety and operating instructions should be read before the product is operated.
Read  all  of  the  instructions  given  here  and  retain  them for  later  use.    Unplug  this  projector  from  AC  power supply  before  cleaning.  Do  not  use  liquid  or  aerosol cleaners.  Use a damp cloth for cleaning.
Follow  all  warnings  and  instructions  marked  on  the projector.
For added protection to the projector during a lightning storm, or when it is left unattended and unused for long...

Safety Instructions
6
Openings  in  the  cabinet  are  provided  for  ventilation and  to  ensure  reliable  operation  of  the  product  and  to protect  it  from  overheating,  and  these  openings  must not be blocked or covered. 
 CAUTION
Hot  air  is  exhausted  from  the  exhaust  vent.    When u s i n g  o r  i n s t a l l i n g  t h e  p r o j e c t o r,  t h e  f o l l o w i n g precautions should be taken. – Do  not  put  any  flammable  object  or  spray  can near  the  projector,  hot  air...

AC Power Cord for the United States and Canada:AC  Power  Cord  used  in  the  United  States  and  Canada  is  listed  by  the  Underwriters Laboratories (UL) and certified by the Canadian Standard Association (CSA).AC  Power  Cord  has  a  grounding-type AC  line  plug.  This  is  a  safety  feature  to  be  sure that the plug will fit into the power outlet. Do not try to defeat this safety feature. Should you be unable to insert the plug into the outlet, contact your electrici\
an.
Compliance
7...

8
Part Names and Functions
Back
ii!0!1
qtu
o
Front
er
Bottom
!5i
q Speaker
w Focus Ring
e Infrared Remote Receiver
r Projection Lens
t Slide Shutter 
  (See page 5.)
y	Slide Shutter Lever
u	Air Intake Vent
i Exhaust Ventsw
 CAUTION
Hot air is exhausted from the exhaust vent. Do  not  put  heat-sensitive  objects  near  this side.
o Power Cord Connector
!0 Top Controls and Indicators
!1 Terminals and Connectors
!2 Air Intake Vents (back and bottom)
!3 Adjustable Foot
!4 Lamp Cover
!5 Air Filters 
✽...

9
Part Names and FunctionsPart Names and Functions
Part Names and Functions
Rear Terminal
qwerty
u
q SERVICE PORT
 This jack is used to service the projector.
w COMPUTER IN /S-VIDEO IN
 /COMPONENT IN 
 Connect  output  signal  from  a  computer, RGB  scart  1-pin  video  output,  S-VIDEO output,  or  component  video  output  to  this terminal.  (p.15-17)
r AUDIO OUT (VARIABLE)
  Connect  an  external  audio  amplifier  to  this jack. (p.15 - 17) This  terminal  outputs  sound  from AUDIO  IN...

10
Part Names and Functions
q
w
e
t
u
i
o
Top Control
r
y
u LAMP REPLACE indicator
 Turn  yellow  when  the  life  of  the  projection lamp draws to an end. (p.54, 60)
y	 WARNING indicator
 Emit  a  red  light  when  the  projector  detects an  abnormal  condition.    This  also  blinks red  when  the  internal  temperature  of  the p r o j e c t o r  e x c e e d s  t h e  o p e r a t i n g  r a n g e . (p.51, 60)
w KEySTONE ed buttons ✽       
 Correct the keystone distortion. (p., 41)
r...