Eiki Projector Lc Wxl200a User Manual

21
Audio Output
AUDIO IN 1/2 
Unplug	the	power	cords	of	both	the	projector	and	external	equipment	from	the	AC	outlet	before	connecting	cables.
Cables used for connection ( = Cables not supplied with this projector.)
Audio Output
Installation
Audio cable (stereo)
(R)(L)
External Audio Equipment
Audio Input
AUDIO OUT (stereo)
• Audio cable 
(R)(L)
(R)(L)
Audio 
cable
Audio cable (stereo)Audio cable (stereo)
Connecting for Audio Signal 

22
This projector uses nominal input voltages of 100–240 V AC and 
it automatically selects the correct input voltage. It is designed to 
work with single-phase power systems having a grounded neutral 
conductor. To reduce the risk of electrical shock, do not plug into 
any other type of power system.
If you are not sure of the type of power being supplied, consult 
your authorized dealer or service center.
Connect the projector with all peripheral equipment before turning 
on the projector....

23
Connect the projector’s AC power cord into an AC outlet. The 
LAMP indicator lights red and the POWER indicator lights 
green.
Press the ON/STAND-BY button on the side control or the ON 
button on the remote control. The LAMP indicator dims and the 
cooling fans start to operate. The preparation display appears 
on the screen and the countdown starts. 
2
3
1
The preparation display will disappear after 30 seconds.
4After the countdown, the input source that was selected the last 
time and the Lamp...

24
Basic Operation
What is PIN code?
PIN (Personal Identification Number) code is a security code that 
allows the person who knows it to operate the projector. Setting a 
PIN code prevents unauthorized use of the projector. 
A PIN code consists of a four-digit number. Refer to the PIN code 
lock function in the Setting Menu on pages 61-62 for locking 
operation of the projector with your PIN code.
CAUTION ON HANDLING PIN CODE
If you forget your PIN code, the projector can no longer 
be started. Take a...

25
Dynamic
Dynamic
Side Control
MENU button
On-Screen Menu
Remote Control
Basic Operation
The projector can be adjusted or set via the On-Screen 
Menu. The menu has a hierarchical structure, with a main 
menu that is divided into submenus, which are further 
divided into other submenus. For each adjustment and 
setting procedure, refer to respective sections in this manual.
Use the Point ▲▼ buttons to highlight or select a main menu 
item. Press the Point ► or the SELECT button to access the 
submenu...

26
Basic Operation
For detailed functions of each menu, see “Menu Tree” on pages 76-78.








Main MenuSub-Menu


 Image select
 For computer source, used to select an image level among Dynamic, Standard, Real, and Image 1-10 (p.40). 
 For Video source, used to select an image level among Dynamic, Standard, Natural, Cinema, and Image 1-10 (p.46).
 Image adjust
 For computer source, used to adjust the computer image. [Contrast/Brightness/Color temp ./White balance (R/G/B)/...

27
The following lens operation can be made with the LENS button on 
the side control. 
Press the LENS button to enter each lens operation mode. The 
selected adjustment display appears on the screen.
Display Lens shift on the screen. Use the Point ▲▼◄► 
buttons to position the screen to the desired point without having 
picture distortion. 
The screen can be moved up or down to 60 percent, or sideways 
up to 10 percent from the central axis of the lens shift.
Press and hold the LENS button for more than...

28
Side Control
Basic Operation
1
2
Press the MENU button to display the On-Screen Menu. Use 
the Point ▲▼ buttons to select Sound. Press the Point ► or 
the SELECT button to access the submenu items. 
Press the VOLUME+/– buttons on the side control or on the 
remote control to adjust the volume. The volume dialog box 
appears on the screen for a few seconds.
Press the MUTE (Point ▼) button on the remote control to select 
On to temporarily turn off the sound. To turn the sound back on, 
press the MUTE...

29
Using the remote control for some frequently used operations is advisabl\
e. Just pressing one of the buttons enables you to 
make the desired operation quickly without calling up the On-Screen Menu\
.
Press the ZOOM buttons on the remote control to zoom in and out 
the image.
ZOOM buttons
Press the FOCUS buttons on the remote control to adjust focus of 
the image.
FOCUS buttons
See page 27 for details.
LENS SHIFT button
Note:			 See	 the	next	 page	 for	the	 description	 of	other	buttons.
INFO ....

30
Press the FREEZE button on the remote control to freeze the picture 
on the screen and Audio mute. To cancel the FREEZE function, press 
the FREEZE button again or press any other button.
Fig.1 will appear when the Freeze function is working.
FREEZE button
FILTER button
Press and hold the FILTER button for more than five seconds to 
operate electrically operated filter to replace the filter.
Note:See	the	previous	page	for	the	description	of	other	buttons.
Basic Operation
Note:
	 •	 The	filter	cannot...