Eiki Projector Lc Wul100a User Manual
Have a look at the manual Eiki Projector Lc Wul100a User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 422 Eiki manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 85
The lens of this projector can be replaced with other optional lens. This feature enables you to use the projector for wide variety of uses.For installation and replacement of the lens, always contact the sales d\
ealer. The projector lens must be installed or replaced by well-trained sales or service engineers. Do not\
attempt to install and replace the lens by yourself as it may cause injury.
Do not hold the lens when carrying or lifting the projector. It may cause serious damage to the projector....](http://img.usermanuals.tech/thumb/1702/89038/w64_eiki-lc-wul100a-manual_d-84.png "Page 85
The lens of this projector can be replaced with other optional lens. This feature enables you to use the projector for wide variety of uses.For installation and replacement of the lens, always contact the sales d\
ealer. The projector lens must be installed or replaced by well-trained sales or service engineers. Do not\
attempt to install and replace the lens by yourself as it may cause injury.
Do not hold the lens when carrying or lifting the projector. It may cause serious damage to the projector....")
![Page 87
Write down the PIN code number in the column below and keep it with this \
manual securely. If you forgot or lost the number and unable to operate the projector, contact the service center.
Factory default set No: 1 2 3 4*
Factory default set No: 4 3 2 1*
* Should the four-digit number be changed, the factory set number will be invalid.
Put the label below (supplied) on in a prominent place of the projector’s body while it is locked with a PIN code.
While the projector is locked with the PIN...](http://img.usermanuals.tech/thumb/1702/89038/w64_eiki-lc-wul100a-manual_d-86.png "Page 87
Write down the PIN code number in the column below and keep it with this \
manual securely. If you forgot or lost the number and unable to operate the projector, contact the service center.
Factory default set No: 1 2 3 4*
Factory default set No: 4 3 2 1*
* Should the four-digit number be changed, the factory set number will be invalid.
Put the label below (supplied) on in a prominent place of the projector’s body while it is locked with a PIN code.
While the projector is locked with the PIN...")
![Page 89
Appendix
This projector provides a function to control and monitor the projector'\
s operations by using the RS-232C serial port.
Connect a RS-232C serial cross cable to CONTROL PORT on the projector and serial port on the PC. (See p.19)
Launch a communication software provided with PC and setup the communication condition as follows:
1
2
3
Baud rate : 9600 / 19200 bpsParity check : noneStop bit : 1Flow control : noneData bit : 8
Type the command for controlling the projector and then enter the...](http://img.usermanuals.tech/thumb/1702/89038/w64_eiki-lc-wul100a-manual_d-88.png "Page 89
Appendix
This projector provides a function to control and monitor the projector'\
s operations by using the RS-232C serial port.
Connect a RS-232C serial cross cable to CONTROL PORT on the projector and serial port on the PC. (See p.19)
Launch a communication software provided with PC and setup the communication condition as follows:
1
2
3
Baud rate : 9600 / 19200 bpsParity check : noneStop bit : 1Flow control : noneData bit : 8
Type the command for controlling the projector and then enter the...")
![Page 90
The command is sent from PC to the projector with the format below; 'C' [Command] 'CR' Command: two characters (refer to the command table below.
- The projector decodes the command and returns the 'ACK' with the format below; 'ACK' 'CR'
- When the projector can not decode the command, it returns with format below. ‘?’ ‘CR’
Format
Appendix
CommandFunction
C00Turn the projector ON
C01Turn the projector OFF (immediately OFF)
C02Turn the...](http://img.usermanuals.tech/thumb/1702/89038/w64_eiki-lc-wul100a-manual_d-89.png "Page 90
The command is sent from PC to the projector with the format below; 'C' [Command] 'CR' Command: two characters (refer to the command table below.
- The projector decodes the command and returns the 'ACK' with the format below; 'ACK' 'CR'
- When the projector can not decode the command, it returns with format below. ‘?’ ‘CR’
Format
Appendix
CommandFunction
C00Turn the projector ON
C01Turn the projector OFF (immediately OFF)
C02Turn the...")
![Page 91
Appendix
The command is sent from PC to the projector with the format below; 'CR' [Command] 'CR' Command: one character (refer to the command table below.The projector decodes the command and returns the 'Character string' with the format below;
Format
The tables on page 90 and 91 show the typical command lists for controll\
ing the projector. Please consult your local dealer for further information of other commands.
CommandFunctionProjector ReturnProjector status...](http://img.usermanuals.tech/thumb/1702/89038/w64_eiki-lc-wul100a-manual_d-90.png "Page 91
Appendix
The command is sent from PC to the projector with the format below; 'CR' [Command] 'CR' Command: one character (refer to the command table below.The projector decodes the command and returns the 'Character string' with the format below;
Format
The tables on page 90 and 91 show the typical command lists for controll\
ing the projector. Please consult your local dealer for further information of other commands.
CommandFunctionProjector ReturnProjector status...")
Appendix
The command is sent from PC to the projector with the format below; 'CR' [Command] 'CR' Command: one character (refer to the command table below.The projector decodes the command and returns the 'Character string' with the format below;
Format
The tables on page 90 and 91 show the typical command lists for controll\
ing the projector. Please consult your local dealer for further information of other commands.
CommandFunctionProjector ReturnProjector status
CR0Status Read
00Power On
80Stand-by mode
40Countdown
20Cooling down
10Power Malfunction
28Cooling down at the temperature anomaly
24Cooling down at Power Management mode
04Power Management mode after Cooling down
21Cooling down after the projector is turned off when the lamps are out.
81Stand-by mode after Cooling down when the lamps are out.
88Stand-by mode after Cooling down at the temperature anomaly.
2CCooling down when the projector is turned off by the shutter management function.
8CStand-by mode after cooling down by the shutter management function.
CR6Temperature Read%1 %2
%3
%1 = Temperature at Sensor 1 (˚C)
%2 = Temperature at Sensor 2 (˚C)
%3 = Temperature at Sensor 3 (˚C)
(ex.) %1 = 12.3˚C, %2 = 23.4˚C, %3 = 34.5˚C
--> The projector displays “12.3 23.4 34.5”
( For each sensor, two digit and the tenth place numbers are displayed with a space between each temperature.)
?Communication failure
Status Read Command
91
MV4B©2012 Eiki International, Inc. U.S.A. EIKI International, Inc. 30251 Esperanza Rancho Santa Margarita CA 92688 -2132 U.S.A. Tel : 800 -242 -3454 (949) -457 -0200 Fax : 800 -457 -3454 (949) -457 -7878 E -Mail : [email protected] Deutschland & Österreich EIKI Deutschl an d G m bH A m Frau wal d 1 2 65510 Idstein Deutschland Tel : 06126 -9371 -0 Fax : 06126 -9371 -14 E -Mail : [email protected] China EIKI (Shanghai) Co., Ltd. Lakeside Oasis Middle Ring Business C e n t re Block 10. #16-0 7 , 1 628, Jin Sha Jiang Road, Shanghai, 200 333. Ch ina Main Line : 86-21 -3 251 -3993 Service Hot Line : 86-21 -3 251 -3995 Fax : 86-21 -3 251 -3 997 E -mail : info@eiki -china.com Canada EIKI CANADA - Eiki International, Inc. P.O. Box 156, 310 First St. - Unit 2, Midland, ON, L4R 4K8, Canada Tel : 800 -563 -3454 (705) -527 -4084 Fax : 800 -567 -4069 (705) -527 -4087 E -Mail : [email protected] Eastern Europe EIKI CZECH SPOL. s.r.o. Nad Cementárnou 1163/4a Praha 4, Podolí 147 00 Czech Republic Tel : +420 24 1 410 928 +420 241 403 095 Fax: +420 241 409 435 E -Mail : [email protected] South East Asia EIKI Industrial (M) Sdn Bhd No. 3A -2C, 4th Floor, Jalan PJU 8/3A, Perdana Business Centre, Bandar Damansara Perdana, 47820 Petaling Jaya, Selangor Malaysia Tel : +603 -772 2-4362 Fax : + 603 -772 2-4392 E -Mail : [email protected] Worldwide EIKI Industrial Company Limited. 6-23 Teramot o , I t am i -shi , Hyogo , 664 -002 6 Japan Tel : +81-72 -782 -7552 Fax : +81 -72 -782 -7590 WorldWide Website http://www.eiki.com