Eiki Projector Lc Wul100a User Manual

							Owner's Manual
■  Lens is optional for the projectors that "L" follows in model number.
Multimedia  Projector 
MODEL LC-WUL100A
           LC-WUL100AL
 Network Supported        
Refer to the Owner's Manual below 
for details about network function.
□  Network Set-up and Operation
□  PJ Network Manager 
						

							This  Multimedia  Projector  is  designed  with  most  advanced  technology  for  portability,  durability,  and ease  of  use.  This  projector  utilizes  built-in  multimedia  features,  a  palette  of  1.07  billion  colors,  and matrix liquid crystal display (LCD) technology.
 ♦ Functionally Rich
 ♦ Multi-use Remote Control
Use the remote control as wired and wireless, or as a PC wireless mouse. Eight remote control codes and selectable pointer shapes are also available.
 ♦ Multilanguage Menu Display
Operation menu is available in 12 languages; English, German, French, Italian, Spanish, Portuguese, Dutch, Swedish, Russian, Chinese, Korean, and Japanese. (p.51)
 ♦ Network-capable
-  
Through an optional Pj-to NetDirector, you can project an image on a computer as well as operate and manage the projector via network.
-  
This projector is loaded with the Wired function. You can use the Crestron RoomView® and AMX Device Discovery. You can manage the projector via network. For details, refer to the owner’s manual “Network Setup and Operation.”
This projector has many useful functions such as lens shifting, ceiling and rear projection, perpendicular omnidirectional projection, a variety of lens options, etc.
Note:
	 •	The	On-Screen	Menu	and	figures	in	this	manual	may	differ	slightly	from	the	product.	 •	The	contents	of	this	manual	are	subject	to	change	without	notice.
Features and Design
 ♦ Simple Computer System Setting
The projector has the Multi-scan system to conform to almost all computer output signals quickly (p.36). Supported resolution up to WUXGA.
 ♦ Direct OFF Function
With the Direct OFF function, you can disconnect the power cord from the wall outlet or turn off the breaker even during projection. (p.24)
 ♦ Security Function
The Security function helps you to ensure security of the projector. With the Key lock function, you can lock the operation on the side control or remote control (p.61). PIN code lock function prevents unauthorized use of the projector.  (pp.61-62)
 ♦ Automatic Filter Replacement Function
The  projector  monitors  the  condition  of  the  filter and  replaces  a  filter  automatically  when  it  detects the clogging.
 ♦ Motor-driven Lens Shift
Projection lens can be moved up, down, right and left with the motor-driven lens shift function. This function makes it easy to provide projected image where you want. Zoom and focus can also be adjusted with a motor-driven operation. (p.17)
 ♦ Power Management
The  Power  management  function  reduces  power consumption and maintains lamp life. (p.59)
 ♦ Multiple Interface Terminals
The  projector  has  many  interface  terminals  that can  support  various  types  of  equipment  and signals. (p.11)
 ♦ Shutter Function
The projector is equipped with the shutter that provides complete blackness when the projected image is not needed with keeping the projector on. The shutter management function allows you to set the timer. It prevents from keeping the projector on when the shutter is closed for a long time. (p.63)
 ♦ Corner Correction
With the "Horizontal and vertical keystone correction function" and "Corner keystone correction function" of this projector, you can correct the keystone distortion even when projecting from the diagonal to the screen.  (pp.31, 44, 50)
 ♦ Picture in Picture Function
This projector is capable of projecting two imagessimultaneously by using either built-in P in P mode or P by P mode. (pp.55-56)
This projector employs WUXGA LCD panels with 1,920x1,200 pixels, allowing it to project high resolution signals at their native resolution.
2 
						

							Table of Contents
Features and Design  . . . . . . . . . . . . . . .2
Table of Contents . . . . . . . . . . . . . . . . . .3
To The Owner  . . . . . . . . . . . . . . . . . . . . .4
Safety Instructions . . . . . . . . . . . . . . . . .5
Air Circulation 6
Installing the Projector in Proper Directions 7
Moving the Projector 8
Cautions in Handling the Projector 8
Compliance . . . . . . . . . . . . . . . . . . . . . . .9
Part Names and Functions   . . . . . . . . .10
Front  10
Back 10
Bottom 10
Rear Terminal  11
Side Control and Indicators 12
Remote Control 13
Remote Control Battery Installation 15
Remote Control Receivers and  Operating Range 15
Wired Remote Control Transmitter 15
Remote Control Code 16
Adjustable Feet 16
Installation . . . . . . . . . . . . . . . . . . . . . . .17
Positioning the Projector 17
Lens Shift Adjustment 17
Lens Installation 18
Connecting to a Computer (Digital and  Analog RGB) 19
Connecting to Video Equipment  (Video, S-video, HDMI) 20
Connecting for Audio Signal 21
Connecting the AC Power Cord 22
Basic Operation  . . . . . . . . . . . . . . . . . .23
Turning On the Projector  23
Turning Off the Projector 24
How to Operate the On-Screen Menu 25
Main Menu 26
Operating with Projector Control 27
Sound Adjustment 28
Operating with Remote Control 29
Keystone Correction 31
Pointer Function 32
Wireless Mouse Operation 32
Input Selection  . . . . . . . . . . . . . . . . . . .33
Direct Operation  33
Computer Input Source Selection 34
Video Input Source Selection 35
Computer Input . . . . . . . . . . . . . . . . . . .36
Computer System Selection 36
Auto PC Adjustment 37
Manual PC Adjustment 38
Image Level Selection 40
Image Adjustment 41
Screen Size Adjustment 42
Video Input  . . . . . . . . . . . . . . . . . . . . . .45
Video System Selection  45
Image Level Selection 46
Image Adjustment 47
Screen Size Adjustment 49
Setting . . . . . . . . . . . . . . . . . . . . . . . . . .51
Setting 51
Maintenance and Care . . . . . . . . . . . . .66
Filter Instructions 66
Replacing the Filter Cartridge 67
Resetting the Filter Counter 68
Resetting the Scroll Counter 68
Lamp Replacement 69
Cleaning the Projection Lens 71
Cleaning the Projector Cabinet 71
Warning Indicators 72
Appendix . . . . . . . . . . . . . . . . . . . . . . . .73
Troubleshooting 73
Menu Tree 76
Indicators and Projector Condition 79
Compatible Computer Specifications 82
Technical Specifications 84
Optional Parts 85
Lens Replacement 85
PJ Link Notice 85
Configurations of Terminals 86
PIN Code Number Memo 87
Dimensions 88
List of Picture in Picture 89
Serial Control Interface 89
TrademarksEach name of corporations or products in this book is either a registere\
d trademark or a trademark of its respective corporation.
3 
						

							Safety Precaution
WARNING:  ● THIS APPARATUS MUST BE EARTHED .
    ●  TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE .
– This projector produces intense light from the projection lens. Do not stare directly into the lens, otherwise eye damage could result. Be especially careful that children do not stare directly into the beam.
– Install the projector in a proper position. Otherwise it may result in a fire hazard.
– Allowing the proper amount of space on the top, sides, and rear of the projector cabinet is critical for proper air circulation and cooling of the unit. The diagrams shown here indicate the minimum space required. If the projector is to be built into a compartment or similarly enclosed, these minimum distances must be maintained.
–  Do not cover the ventilation slots on the projector. Heat build-up can shorten the service life of your projector, and can also be dangerous.–   If the projector is unused for an extended time, unplug the projector from the power outlet.
– Do not project the same image for a long time. The afterimage may remain on the LCD panels by the characteristic of panel.
 
CAUTION ON HANGING FROM THE CEILING
DO NOT SET THE PROJECTOR IN GREASy, WET , OR SMOKy CONDITIONS SUCH AS IN A KITCHEN TO PREVENT A BREAKDOWN OR  A DISASTER . I F 
THE PROJECTOR  COMES IN CONTACT  WITH OIL  OR  CHEMICALS, IT MA y BECOME DETERIORATED .
To The Owner
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) . NO USER-SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT  .  REFER SERVICING TO QUALIFIED SERVICE PERSONNEL .
THIS SyMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT  .
THIS SyMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE OWNER'S MANUAL WITH THIS UNIT .
CAUTIONRISK OF ELECTRIC SHOCK
DO NOT OPEN
Before installing and operating the projector, read this manual thoroughly.The projector provides many convenient features and functions. Operating the projector properly enables you to manage those features and maintains it in good condition for many years to come.Improper operation may result in not only shortening the product life, but also malfunctions, fire hazard, or other accidents. 
If your projector seems to operate improperly, read this manual again, check operations and cable connections and try the solutions in the “Troubleshooting” section in the back of this manual. If the problem still persists, contact the dealer where you purchased the projector or the service center.
FOR EU USERSThe  symbol  mark  and  recycling  systems  described  be-low apply to EU countries and do not apply to countries in other areas of the world.Your  product  is  designed  and  manufactured  with  high quality  materials  and  components  which  can  be  recy-cled and/or reused.The symbol mark means that electrical and electronic equip-ment, batteries and accumulators, at their end-of-life, should be disposed of separately from your household waste.
Note: If  a  chemical  symbol  is  printed  beneath  the  symbol mark,  this  chemical  symbol  means  that  the  battery  or accumulator  contains  a  heavy  metal  at  a  certain  con-centration.  This  will  be  indicated  as  follows:  Hg:  mer-cury, Cd: cadmium, Pb: lead.In the European Union there are separate collection systems for used electrical and electronic equipment, batteries and accumulators.Please, dispose of them correctly at your local community waste collection/recycling centre.
Please, help us to conserve the environ-ment we live in! READ AND KEEP THIS OWNER’S MANUAL FOR LATER USE .
CAUTION
Not for use in a computer room as defined in the Standard for the Protection of Electronic Computer/Data Processing Equipment, ANSI/NFPA 75.
SIDE and TOPREAR
0.7’(20cm)
1.5’(50cm) 3’(1m) 3’(1m)
20cm
50cm 1m 1m
4 
						

							All the safety and operating instructions should be read before the product is operated.
Read all of the instructions mentioned here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning.
Follow  all  warnings  and  instructions  marked  on  the projector.
For added protection to the projector during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet. This will prevent damage due to lightning and power line surges.
Do not expose this unit to rain or operate it near water for example, in a wet basement, near a swimming pool, etc...
Do not use attachments not recommended by the manufacturer as they may cause hazards.
Do not place this projector on an unstable cart, stand, or table.  The projector may fall, causing serious injury to a child or adult, and serious damage to the projector. Use only with a cart or stand recommended by the manufacturer, or sold with the projector. Wall or shelf mounting should follow the manufacturer's instructions, and should use a mounting kit approved by the manufacturers.
An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.
Slots and openings in the back and side of the cabinet are provided for ventilation, to ensure reliable operation of the equipment and to protect it from overheating.
The openings should never be covered with cloth or other materials, and the bottom opening should not be blocked by placing the projector on a bed, sofa, rug, or other similar surface. This projector should never be placed near or over a radiator or heat register.
This projector should not be placed in a built-in installation such as a book case unless proper ventilation is provided.
Never push objects of any kind into this projector through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock.  Never spill liquid of any kind on the projector.
Do not install the projector near the ventilation duct of air-conditioning equipment.
This projector should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied, consult your authorized dealer or local power company.
Do not overload wall outlets and extension cords as this can result in fire or electric shock. Do not allow anything to rest on the power cord. Do not locate this projector where the cord may be damaged by persons walking on it.
Do not attempt to service this projector yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
Unplug this projector from wall outlet and refer servicing to qualified service personnel under the following conditions:a. When the power cord or plug is damaged or frayed.b. If liquid has been spilled into the projector.c. If the projector has been exposed to rain or water.d. If the projector does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the projector to normal operation.e. If the projector has been dropped or the cabinet has been damaged.f.   When the projector exhibits a distinct change in performance-this indicates a need for service.
When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or injury to persons.
Upon completion of any service or repairs to this projector, ask the service technician to perform routine safety checks to determine that the projector is in safe operating condition.
Safety Instructions
NOTE FOR CUSTOMERS IN THE US
LAMP(S) INSIDE THIS PRODUCT
CONTAIN MERCURY AND MUST BE RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS.
5 
						

							Openings in the cabinet are provided for ventilation. To ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered. 
 CAUTION
Hot air is exhausted from the exhaust vent. When using or installing the projector, the following precautions should be taken. –   Do not put any flammable object or spray can near the projector, as hot air is exhausted from the air vents.–    Keep the exhaust vent at least 3' (1 m) away from any objects.–   Do not touch peripheral parts of the exhaust vent, especially screws and metallic parts. These areas will become hot while the projector is being used.–    Do not put anything on the cabinet. Objects put on the cabinet will not only get damaged but also may cause fire hazard by heat.
Cooling fans are provided to cool down the projector. The fans’ running speed is changed according to the temperature inside the projector.
Exhaust Vent(Hot air exhaust)
Air Intake Vent
Air flow
The projector uses a lamp which generates significant heat. The cooling fans and air vents are provided to dissipate the heat by drawing air into the housing and the filter is located in the intake vents to prevent dust from getting inside of the projector.
In order to care for the projector appropriately, regular cleaning is required. Remove any dirt or dust that has accumulated on the projector.
If the projector reaches a time set in the timer setting, a Filter replacement icon (Fig. 1) appears on the screen and WARNING FILTER indicator on the top panel lights up (see below), indicating that the filter replacement is necessary.
If the projector detects that the filter is clogged and no scroll is left in the filter cartridge, a Filter cartridge replacement icon (Fig. 2) appears on the screen and WARNING FILTER indicator on the top panel lights up (see below). Stop using the projector immediately and replace the filter cartridge.
Blocking the air vents and leaving the projector uncleaned for a long time may not only damage the projector and may require costly repairs but may also cause accidents or fire.
For maintenance of the filter, refer to “Filter counter” on page 65 and “Maintenance and Care” on pages 66-68.
Damages to the projector caused by using an uncleaned filter or improper maintenance will void the warranty on the projector  .
IMPORTANT!
Filter Maintenance!!
Top Panel
WARNING FILTERindicator
Fig . 1   Filter replacement icon
Fig . 2    Filter cartridge replacement icon
Safety Instructions
Air Circulation
6 
						

							Use the projector properly in specified positions. Improper positioning \
may shorten the lamp life and result in severe accidents or fire hazard.This projector can project the picture in upward, downward, or inclined \
position in perpendicular direction to the horizontal plane. When installing the projector in downwardly inc\
lined position, install the projector bottom side up.
Avoid positioning the projector as described below when installing.
Positioning Precautions
Do not tilt the projector more than 10 degrees from side to side. 
Do not put the projector on either side to project an image. 
 10°10°
10°10°
In upward projection, do not tilt the projector over 10 degrees right and left.
In downward projection, do not tilt the projector over 10 degrees right and left.
For ceiling mounting, you need the ceiling mount kit designed for this p\
rojector. When not mounted properly, the projector may fall, causing hazards or injury. For details, consult your dealer. The warranty on this projector does not cover any damage caused by use o\
f any non-recommended ceiling mount kit or installation of the ceiling mount kit i\
n an improper location.
CAUTION ON CEILING MOUNTING
Safety Instructions
Note:	 To	inverse	or	reverse	the	image,	set	the	ceiling	function	to	On.	(pp.	44,	50)
Installing the Projector in Proper Directions
Do not radiate strong light such as laser light on the projection lens d\
irectly, as this may degrade the functionality of the projector, and will void any applicable warranties.
Cautious use of equipment with laser technology
7 
						

							Use  the  handle  grip  when moving the projector.
Retract the adjustable feet to prevent damage to the lens and cabinet when carrying.
When this projector is not in use for an extended period, put it into a \
suitable case to protect the projector. 
 CAUTION IN CARR yING OR TRANSPORTING THE PROJECTOR
– Do not drop or bump the projector, otherwise damages or malfunctions may result.– When carrying the projector, use a suitable carrying case.– Do not transport the projector by courier or any other transport service\
 in an unsuitable transport case. This may cause damage to the projector. For information about transporting the projector by courier or any other transport service, consult your dealer.– Do not put the projector in a case before it is cooled enough.
Do not hold the lens or the lens compartment tube when lifting or moving the projector. Doing so may cause damage to the lens and the projector. 
Care must be taken when handling the projector; do not drop, bump, subject it to strong forces, or put other things on the cabinet.
Do not hold the lens and the peripheral part.CAUTION
Projection lens is a motorized lens. Please note the followings when using the projector.
●  Do not touch the lens while it is moving as this could cause injury to the fingers.● Never allow children to touch the lens.
Safety Instructions
Moving the Projector
Cautions in Handling the Projector
Notes on protector
Remove the protector on the lens before use, and keep it for later use. \
For transportation, press and hold the LENS button on the side control or LENS SHIFT button on the remote control for more than 5 seconds to return the lens to the central position, and then attach the protecto\
r to protect the lens. (Only for LC-WUL100A)
Protector
8 
						

							AC Power Cord for the United Kingdom: This  cord  is  already  fitted  with  a  moulded  plug  incorporating  a  fuse,  the  value  of  which  is  indicated  on the  pin  face  of  the  plug.  Should  the  fuse  need  to  be  replaced,  an ASTA  approved  BS  1362  fuse  must be used of the same rating, marked thus A S A. If the fuse cover is detachable, never use the plug with the cover  omitted.  If  a  replacement  fuse  cover  is  required,  ensure  it  is  of  the  same  colour  as  that  visible on  the  pin  face  of  the  plug  (i.e.  red  or  orange).  Fuse  covers  are  available  from  the  Parts  Department indicated in your User Instructions. If the plug supplied is not suitable for your socket outlet, it should b\
e cut off and destroyed. The end of the flexible cord should be suitably prepared and the correct\
 plug fitted.  
 WARNING:  A  PLUG  WITH  BARED  FLEXIBLE  CORD  IS  HAZARDOUS  IF  ENGAGED  IN  A  LIVE SOCKET OUTLET  .
 The Wires in this mains lead are coloured in accordance with the followi\
ng code:    Green-and-yellow ············· Earth   Blue ·················\
············· Neutral   Brown ·················\
··········· Live As  the  colours  of  the  wires  in  the  mains  lead  of  this  apparatus  may  not  correspond  with  the  coloured markings identifying the terminals in your plug proceed as follows: The  wire  which  is  coloured  green-and-yellow  must  be  connected  to  the  terminal  in  the  plug  which  is marked by the letter E or by the safety earth symbol  or coloured green or green-and-yellow. The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black. The  wire  which  is  coloured  brown  must  be  connected  to  the  terminal  which  is  marked  with  the  letter  L or coloured red.
 WARNING: THIS APPARATUS MUST BE EARTHED .
The AC Power Cord supplied with this projector meets the requirement for use\
 in the country you purchased it.  
AC Power Cord for the United States and Canada:
   AC Power Cord used in the United States and Canada is listed by the Underwriters Laboratories (UL) and certified by the Canadian Standard Association (CSA).
   AC  Power  Cord  has  a  grounding-type AC  line  plug.    This  is  a  safety  feature  to  be sure that the plug will fit into the power outlet. Do not try to defeat this safety feature. Should you be unable to insert the plug into the outlet, contact your el\
ectrician.GROUND
THE SOCKET-OUTLET SHOULD BE INSTALLED NEAR THE EQUIPMENT AND EASIL y ACCESSIBLE .
AC Power Cord Requirement
Federal Communications Commission Notice
This equipment has been tested and found to comply with the limits for a\
 Class A digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial envi\
ronment. This equipment generates, uses, and can radiate radio frequency energy and, if not inst\
alled and used in accordance with the instruction manual, may cause harmful interference to radio com\
munications. Operation of this equipment in a residential area is likely to cause harmful interference \
in which case the user will be required to correct the interference at his own expense.
Do not make any changes or modifications to the equipment unless otherwi\
se specified in the instructions. If such changes or modifications should be made, you could\
 be required to stop operation of the equipment.
Compliance
Canadian Radio Interference Regulations
This Class A digital apparatus meets all requirements of the Canadian ICES-003.
WARNING
This is a Class A product. In a domestic environment this product may cause radio interfe\
rence in which case the user may be required to take adequate measures.
9 
						

							Part Names and Functions
CAUTION
Hot air is exhausted from the exhaust vent. Do not put heat-sensitive objects near this side.
① Lens Release Button
② Indicators
③ Lamp Cover 
④ Speaker 
⑤ Lens Cap
(for LC-WUL100A) 
⑥ Projection Lens
(for LC-WUL100A) 
Do not cover the light beam in front of the 
lens. High temperature from light beam may 
damage the lens.
⑦ Lens Mount Cover
(for LC-WUL100AL) 
⑧ Infrared Remote Receiver (Front & Top) 
⑨ Side Controls
⑩ Exhaust Vent
③
④
Front
⑩⑨
②①
⑥⑧⑤⑦
Bottom
Back
⑯
⑮
⑪⑬
⑭
⑫
⑱
⑩
⑰
⑰
⑱
⑪ Infrared Remote Receiver (Back)
⑫ Terminals and Connectors
⑬ Filter Cover & Air Intake Vent
⑭ Power Cord Connector
⑮ Rear Cover (Optional Parts Attachment)
⑯ Hand Grip
⑰ Security Chain Hook
Note:
This	is	not	a	handle	for	carrying	the	projector.
Do	not	carry	the	projector	with	this	hook.
⑱ Adjustable Feet
CAUTION
10