Eiki Projector Lc Wul100a User Manual

Audio Output
AUDIO IN 1/2 
Unplug	the	power	cords	of	both	the	projector	and	external	equipment	from	the	AC	outlet	before	connecting	cables.
Cables used for connection ( = Cables not supplied with this projector.)
Audio Output
Installation
Audio cable (stereo)
(R)(L)
External Audio Equipment
Audio Input
AUDIO OUT      (stereo)
• Audio cables 
(R)(L)
(R)(L)
Audio cable
Audio cable (stereo)Audio cable (stereo)
Connecting for Audio Signal
21 

This projector uses nominal input voltages of 100–240 V 
AC and it automatically selects the correct input voltage. It is designed to work with single-phase power systems having a grounded neutral conductor. To reduce the risk of electrical shock, do not plug into any other type of power system.If you are not sure of the type of power being supplied, consult your authorized dealer or service center.Connect the projector with all peripheral equipment before turning on the projector. 
Installation
NOTE ON...

Connect the projector’s AC power cord into an AC outlet. The LAMP indicator lights red and the POWER indicator lights green.
Press the ON/STAND-BY button on the side control or the ON button on the remote control. The LAMP indicator dims and the cooling fans start to operate. The preparation display appears on the screen and the countdown starts. 
2
3
1
The preparation display will disappear after 30 seconds.
4After the countdown, the input source that was selected the last time and the Lamp control...

Basic Operation
What is PIN code?
PIN (Personal Identification Number) code is a security code that allows the person who knows it to operate the projector. Setting a PIN code prevents unauthorized use of the projector. 
A PIN code consists of a four-digit number. Refer to the PIN code lock function in the Setting Menu on pages 61-62 for locking operation of the projector with your PIN code.
CAUTION ON HANDLING PIN CODEIf you forget your PIN code, the projector can no longer be started. Take a special...

Basic Operation
How to Operate the On-Screen Menu
Side Control
MENU button
On-Screen Menu
Remote Control
The projector can be adjusted or set via the On-Screen Menu. The menu has a hierarchical structure, with a main menu that is divided into submenus, which are further divided into other submenus. For each adjustment and setting procedure, refer to respective sections in this manual.
Use the Point ▲▼ buttons to highlight or select a main menu item. Press the Point ► or the SELECT button to access the...

Basic Operation
For detailed functions of each menu, see “Menu Tree” on pages 76-78.








Main MenuSub-Menu


 Image select For computer source, used to select an image level among Dynamic, Standard, Real, and Image 1-10 (p.40).  For Video source, used to select an image level among Dynamic, Standard, Natural, Cinema, and Image 1-10 (p.46). Image adjust For computer source, used to adjust the computer image. [Contrast/Brightness/Iris/Color temp ./White balance...

The following lens operation can be made with the LENS button on the side control. 
Press the LENS button to enter each lens operation mode. The selected adjustment display appears on the screen.
Display Lens shift on the screen. Use the Point ▲▼◄► buttons to position the screen to the desired point without having picture distortion. The screen can be moved up or down to 60 percent, or sideways up to 10 percent from the central axis of the lens shift.Press and hold the LENS button for more than 5 seconds...

Side Control
Basic Operation
1
2
Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select Sound. Press the Point ► or the SELECT button to access the submenu items. 
Press the VOLUME+/– buttons on the side control or on the remote control to adjust the volume. The volume dialog box appears on the screen for a few seconds.
Press the MUTE (Point ▼) button on the remote control to select On to temporarily turn off the sound. To turn the sound back on, press the MUTE (Point ▼)...

Using the remote control for some frequently used operations is advisabl\
e. Just pressing one of the buttons enables you to make the desired operation quickly without calling up the\
 On-Screen Menu.
Press the ZOOM buttons on the remote control to zoom in and out the image.
ZOOM buttons
Press the FOCUS buttons on the remote control to adjust focus of the image.
FOCUS buttons
See page 27 for details.
LENS SHIFT button
Remote Control
D .ZOOM button
SHUTTER buttonAUTO PCbutton
ZOOM buttonsFOCUS buttons...

Press the FREEZE button on the remote control to freeze the picture on the screen and Audio mute. To cancel the FREEZE function, press the FREEZE button again or press any other button.
Fig.1 will appear when the Freeze function is working.
FREEZE button
FILTER button
Press and hold the FILTER button for more than 5 seconds to operate electrically operated filter to replace the filter.
Remote Control
POINTER button
FILTER button
Note:See	the	previous	page	for	the	description	of	other	buttons....