Eiki Projector Lc Wul100 User Manual

							The projector is detecting abnormal condition .
Indicators
Projector ConditionPOWERgreenLAMP red
WARNINGTEMP.red
WARNINGFILTERorange
SHUTTER blue
 LAMPREPLACEorange
If the Filter counter reaches a time set in the timer setting, a Filter replacement icon (Fig.2) will appear on the screen and the WARNING FILTER indicator on the top panel will light up. Replace the filter as soon as possible. If the filter is out of scroll and the projector reaches a time set in the timer setting, Fig. 3 will appear on the screen and the WARNING FILTER indicator will light up. Replace the filter cartridge as soon as possible.
If the filter is clogged and no scroll is left in the filter cartridge, a Filter cartridge replacement icon (Fig.4) will appear on the screen and the WARNING FILTER indicator will light up. Replace the filter cartridge as soon as possible.
Note:   Fig.2,	Fig.3	and	Fig.4	icon	will	not	appear	when	the	Display	function	is	set	to	Off	(p.52)	or	during	“Freeze”	(p.30).
The filter cartridge is not installed in the projector. Check the filter compartment to see if the filter cartridge is installed in the projector. When the filter cartridge is installed and the indicators continue to light and blink, read the column below.
The projector detects an abnormal condition and cannot be turned on. Unplug the AC power cord and plug it again to turn on the projector. If the projector is turned off again, unplug the AC power cord and contact the dealer or the service center. Do not leave the projector on. It may cause an electric shock or a fire hazard.
The shutter is out of control. 
The shutter is out of control. (The projector is in the cooling mode.)
The shutter is out of control. (The projector is in the stand-by mode.) In that case, contact the service center immediately.
Fig .2    Filter replacement icon
Fig .4   Filter cartridge replacement icon
Fig .3
Appendix
❖









❊
❊
❊
❖
❖

81 
						

							ON-SCREEN DISPLAyRESOLUTIONH-Freq . (kHz)V-Freq .(Hz)
VGA 1640x48031.470 59.880 VGA 2720x40031.470 70.090 VGA 3640x40031.470 70.090 VGA 4640x48037.860 74.380 VGA 5640x48037.860 72.810 VGA 6640x48037.500 75.000 VGA 7640x48043.269 85.000 MAC LC13640x48034.970 66.600 MAC 13640x48035.000 66.670 480p640x48031.470 59.880 575p768x57531.250 50.000 575i768x576(Interlace)15.62550.000 480i640x480(Interlace)15.73460.000SVGA 1800x60035.156 56.250 SVGA 2800x60037.880 60.320 SVGA 3800x60046.875 75.000 SVGA 4800x60053.674 85.060 SVGA 5800x60048.080 72.190 SVGA 6800x60037.900 61.030 SVGA 7800x60034.500 55.380 SVGA 8800x60038.000 60.510 SVGA 9800x60038.600 60.310 SVGA 10800x60032.700 51.090 SVGA 11800x60038.000 60.510 MAC 16832x62449.720 74.550 XGA 11024x76848.360 60.000 XGA 21024x76868.677 84.997 XGA 31024x76860.023 75.030 XGA 41024x76856.476 70.070 XGA 51024x76860.310 74.920 XGA 61024x76848.500 60.020 XGA 71024x76844.000 54.580 XGA 81024x76863.480 79.350 XGA 91024x768(Interlace)36.00087.170XGA 101024x76862.040 77.070 XGA 111024x76861.000 75.700 XGA 121024x768(Interlace)35.52286.960XGA 131024x76846.900 58.200 XGA 141024x76847.000 58.300 XGA 151024x76858.030 72.000 MAC 191024x76860.240 75.080 SXGA 11152x86464.200 70.400 SXGA 21280x102462.500 58.600 SXGA 31280x102463.900 60.000 SXGA 41280x102463.340 59.980 SXGA 51280x102463.740 60.010 SXGA 61280x102471.690 67.190 SXGA 71280x102481.130 76.107 SXGA 81280x102463.980 60.020 SXGA 91280x102479.976 75.025 SXGA 101280x96060.000 60.000 SXGA 111152x90061.200 65.200 SXGA 121152x90071.400 75.600 
ON-SCREEN DISPLAyRESOLUTIONH-Freq . (kHz)V-Freq .(Hz)
SXGA 131280x1024(Interlace)50.00086.000SXGA 141280x1024(Interlace)50.00094.000
SXGA 151280x102463.370 60.010 SXGA 161280x102476.970 72.000 SXGA 171152x90061.850 66.000 SXGA 181280x1024(Interlace)46.43086.700SXGA 191280x102463.790 60.180 SXGA 201280x102491.146 85.024 SXGA+ 11400x105063.970 60.190 SXGA+ 21400x105065.350 60.120 SXGA+ 31400x105065.120 59.900 SXGA+ 41400x105064.03060.010SXGA+ 51400x105062.50058.600SXGA+ 61400x105064.74459.948SXGA+ 71400x105065.31759.978MAC 211152x87068.680 75.060 MAC1280x96075.000 75.080 MAC1280x102480.000 75.080 WXGA 11366x76848.360 60.000 WXGA 21360x76847.700 60.000 WXGA 31376x76848.360 60.000 WXGA 41360x76856.160 72.000 WXGA 61280x76847.776 59.870 WXGA 71280x76860.289 74.893 WXGA 81280x76868.633 84.837 WXGA 91280x80049.600 60.050 WXGA 101280x80041.200 50.000 WXGA 111280x80049.70259.810WXGA 121280X80063.980 60.020WUXGA 11920x120074.55659.885WUXGA 21920x120074.03859.950WSXGA +11680x105065.29059.954WXGA +11440x90055.93559.887WXGA +21440x90074.91860.000UXGA 11600x120075.000 60.000 UXGA 21600x120081.250 65.000 UXGA 31600x120087.500 70.000 UXGA 41600x120093.750 75.000 UXGA 51600x1200106.25085.000720p1280x72045.000 60.000 720p1280x72037.50050.000 1035i1920x1035(Interlace)33.75060.000
1080i1920x1080(Interlace)33.75060.0001920x1080(Interlace)28.125 50.000 
1080p
1920x108033.75030.0001920x108028.12525.0001920x108027.00024.0001920x108067.500060.0001920x108056.25050.0001080psf/301920x108033.75060.0001080psf/251920x108028.12550.0001080psf/241920x108027.00048.000
Basically this projector can accept the signal from all computers with the V- and H-Frequency mentioned below and less than 162 MHz of Dot Clock. When the input signal is Analog, refer to the chart below.
Appendix
Note: True cannot	be	selected	when	is	selected.	(p.42)


Compatible Computer Specifications

Appendix
82 
						

							ON-SCREEN DISPLAyRESOLUTIONH-Freq . (kHz)V-Freq .(Hz)
D-VGA640x48031.470 59.940 D-480p720x48031.470 59.880 D-575p720x57531.250 50.000 D-SVGA800x60037.879 60.320 D-XGA1024x76843.363 60.000 D-WXGA 11366x76848.360 60.000 D-WXGA 21360x76847.700 60.000 D-WXGA 31376x76848.360 60.000 D-WXGA 41360x76856.160 72.000 D-WXGA 51366x76846.500 50.000 D-WXGA 61280x76847.776 59.870 D-WXGA 71280x76860.289 74.893 D-WXGA 81280x76868.63384.837D-WXGA 91280x80049.600 60.050 D-WXGA 101280x80041.200 50.000 D-WXGA 111280x80049.70259.810D-WXGA 121280x80063.980 60.020 D-SXGA 11280x102463.98060.020D-SXGA 21280x102460.27658.069D-SXGA+ 11400x105063.97060.190D-SXGA+ 21400x105065.35060.120D-SXGA+ 31400x105065.12059.900D-SXGA+ 41400x105064.03060.010D-SXGA+ 51400x105062.50058.600D-SXGA+ 61400x105064.74459.948D-SXGA+ 71400x105065.31759.978D-UXGA1600x120075.00060.000D-WUXGA 21920 x 120074.03859.950D-WSXGA+ 11680 x 105065.29059.954D-WXGA+ 11440x90055.93559.887
ON-SCREEN DISPLAyRESOLUTIONH-Freq . (kHz)V-Freq .(Hz)
D-720p1280x72045.000 60.000 D-720p1280x72037.500 50.000 D-1035i1920x1035(Interlace)33.75060.000
D-1080i1920x1080(Interlace)33.75060.0001920x1080(Interlace)28.12550.000
D-1080psf/301920x108033.750 60.000 D-1080psf/251920x108028.125 50.000 D-1080psf/241920x108027.000 48.000 
D-1080p
1920x108033.75030.0001920x108028.12525.0001920x108027.00024.0001920x108067.50060.0001920x108056.25050.000D-480i720 x 480----59.94/60D-575i720 x575----50.00D-480p720 x 480----59.94/60D-575p720 x575----50.00D-720p1280 x 720----59.94/60D-720p1280 x 720----50.00D-1080i1920 x 1080----59.94/60D-1080i1920 x 1080----50.00D-1080p1920 x 1080----59.94/60D-1080p1920 x 1080----50.000D-1080p1920 x 1080----24.000
Appendix
When the input signal is digital from HDMI/DVI-D terminal, see the chart\
 below.
Note:
•	Depending	on	the	condition	of	signals	and	the	type	and	length	of	cables,	these	signals	may	not	be	properly	viewed.•Specifications	are	subject	to	change	without	notice.•You	might	be	able	to	project	images	even	when	signals	other	than	above	are	inputted,	however	the	functions	of	the	projector	could	be	limited.•	Depending	on	your	PC	settings,	the	digital	signals	of	your	PC	may	not	be	projected	correctly.	In	such	a	case,	confirm	your	PC	settings.	•	 When	you	project	a	DVI	signal,	connect	the	cables,	turn	the	projector	on,	then	select	the	input	Finally,	turn	on	your	PC.		Be	sure	to	follow	this	procedure,	otherwise	an	image	may	not	be	projected	on	the	screen.	If	an	image	is	not	projected	correctly,	restart	your	PC.•	 Do	not	disconnect	the	cable	while	the	projector	is	running.	If	the	cable	has	been	disconnected	and	then	reconnected,	an	image	may	not	be	correctly	projected.
This symbol on the nameplate means the product is Listed by Underwriters Laboratories Inc. It is designed and manufactured to meet rigid U.L. safety standards against risk of fire, casualty and electrical hazards.
The CE Mark is a Directive conformity mark of the European Community (EC).
Licensed under USP 5,717,422 USP 6,816,141
83 
						

							Appendix
Mechanical Information  Projector Type  Multi-media Projector  Dimensions (W x H x D)  LC-WUL100L  : 19.27'' x 6.46'' x 14.61'' (489.5 mm x 164.0 mm x 371.1 mm)     LC-WUL100    : 19.27'' x 6.46'' x 17.12'' (489.5 mm x 164.0 mm x 434.8 \
mm)  Net Weight   LC-WUL100L  : 19.8 lbs (9.0 kg)     LC-WUL100    : 21.6 lbs (9.8 kg)  Feet Adjustment  0˚ to 4˚        
Panel Resolution  LCD Panel System  0.76'' TFT Active Matrix type, 3 panels   Panel Resolution  1,920 x 1,200 dots  Number of Pixels  6,912,000 (1,920 x 1,200 x 3 panels)        
Signal Compatibility  Color System PAL, SECAM, NTSC, NTSC4.43, PAL-M, and PAL-N  SD/HD TV Signal  480i, 480p, 575i, 575p, 720p, 1035i, 1080i and 1080p  Input Scanning Frequency  H-sync. 15 kHz–120 kHz, V-sync. 48 Hz–100 Hz   
Optical Information  Projection Image Size (Diagonal)  Adjustable from 40'' to 400'' (LC-WUL100)  Throw Distance  4.5' (1.4m) - 78.6' (24.0m)  (LC-WUL100)        Projection Lens  F1.7–2.3 lens with f=26.9 mm–45.4 mm with motor zoom and focus     (LC-WUL100)          Projection Lamp  330 W lamp               
Interface Input 1   DVI [RGB(PC digital), RGB(AV HDCP)] / HDMI (1.3 with Deepcolor) / Mini D-sub15pin     [RGB, RGB (Scart)]  Input 2  BNC Type x 5 (G or Video/Y, B or Pb-Cb, R or Pr-Cr, H/HV and V)  Input 3  RCA Type x 3 (Video/Y, Pb/Cb,Pr/Cr), Mini DIN 4 pin x 1 (S-video)  Analog Out Analog RGB (Mini D-sub 15 pin) Terminal x 1  Audio Out  Audio (Mini Type stereo) x 1 (Variable)  Audio In 1/2  Audio (Mini Type stereo) x 1  Audio In 3   RCA Type x 2  R/C Jack  Mini jack (Wired Remote) x 1  Control Port  D-sub 9 pin x 1   USB Connector   USB Series B x 1  Option  Pj-to NetDirector Terminal x 1  LAN Connection Terminal  RJ - 4 5 
Audio Internal Audio Amp   10 W RMS  Built-in Speaker  1 speaker, ø1.46" (37mm) 
Power Voltage and Power Consumption  AC 100–120 V (5.4A Max. Ampere), 50/60 Hz (The U.S.A and Canada)     AC 100-240 V (5.4-2.6A Max. Ampere), 50/60Hz (For other countries) 
Operating Environment Operating Temperature  41˚F–104˚F (5˚C–40˚C)  Storage Temperature  14˚F–140˚F (-10˚C–60˚C) 
Remote Control  Battery  AAA or LR03 Type x 2          Operating Range  16.4' (5 m/±30˚)  Dimensions  1.9'' (W) x 1.1'' (H) x 5.7'' (D) (48 mm x 27 mm x 145 mm)    Net Weight  3.6 oz (102 g) (including batteries) 
Accessories Owner’s Manual (CD-ROM)     Lens Cap (for LC-WUL100)                               Network Application (CD-ROM)  Quick Reference Guide     Lens Mount Cover (for LC-WUL100L)  AC Power Cord     Lens Antitheft screw *  Remote Control and Batteries     VGA Cable  PIN Code Label     Wired remote cable
● The specifications are subject to change without notice.● LCD panels are manufactured to the highest possible standards. Even though 99.99% of the pixels are effective, a tiny fraction of the pixels (0.01% or less) may be ineffective by the characteristics of the LCD panels.
Technical Specifications
*  Contact the dealer where you purchased the projector or the service center about the Lens Antitheft Screw.
84 
						

							The lens of this projector can be replaced with other optional lens. This feature enables you to use the projector for wide variety of uses.For installation and replacement of the lens, always contact the sales d\
ealer. The projector lens must be installed or replaced by well-trained sales or service engineers. Do not\
 attempt to install and replace the lens by yourself as it may cause injury.
Do not hold the lens when carrying or lifting the projector. It may cause serious damage to the projector. 
This projector is compliant with PJLink Standard Class 1 of JBMIA (Japan Business Machine and Information System Industries Association). The projector supports all commands defined by PJLink Class 1 and is verified conformance with PJLink Standard Class 1.
PJLink is a registered trademark of JBMIA and pending trademark in some countries.
To the sales and service engineers:For the lens replacement and lens installation, refer to the installatio\
n manual of the optional lens. Before replacing and installing the lens, make sure that you are using the lens\
 with the correct Type No.
Projector InputPJLink InputParameterInput 1RGB (PC analog)RGB 111RGB (Scart)RGB 212RGB (PC Digital)DIGITAL 131RGB (AV HDCP)DIGITAL 232HDMIDIGITAL 333Input 2VideoVIDEO 121Y, Pb/Cb,Pr/CrVIDEO 222RGBRGB 313Input 3VideoVIDEO 323Y, Pb/Cb,Pr/CrVIDEO 424S-videoVIDEO 525Input 4NETWORKNETWORK 151
The parts listed below are optionally available. When ordering those par\
ts, specify the item name and Model No. to the sales dealer.
Appendix
Optional Parts
Pj Link Notice
Lens Replacement
     Model No.
Standard Zoom Lens      : AH-24741 Long Zoom Lens     : AH-24771 Ultra Long Zoom Lens     : AH-24781 Short Zoom Lens     : AH-24711 
Short Fixed Lens     : AH-24721 SCART-VGA Cable     : AH-98881 Pj-to NetDirector     : PjNET-50
85 
						

							ANALOG/ ANALOG OUT (Mini D-sub 15 pin)
Appendix
Configurations of Terminals
512341096781514131112
CONTROL PORT CONNECTOR (D-sub 9 pin)
-----R X DT X D-----SG---------------
Serial12345678
Vcc- Data+ DataGround
1234
USB CONNECTOR (Series B)
2
34 1
-----9
RX –TX +TX –RX +234
87654321
5678
1
LAN TERMINAL
-----
---------------
135791
11315171918161412108642
TMDS Dat a 2+  Input
Ground (TMDS Dat a 1)
Ground (TMDS Data 2)
TMDS Data 1+ InputTMDS Data 2- Input
TMDS Data 1- InputTMDS Dat a 0+ InputGround (TMDS Dat a 0)
1
5
2
43
678
Ground (TMDS Clock)
SCL
TMDS Cloc k- Input
----------
SDAGround (DDC/CEC)
11
1 5
12
1413
1617
TMDS Dat a 0- InputTMDS Cloc k+ Input910Plug insert detection1 91 8+5V P ower
HDMI (19 Pin Type A)
Red Input
Ground (Horiz.sync.)
Green Input
No ConnectBlue Input
Ground (Red)Ground (Green)Ground (Blue)
1
5
2
43
678
Horiz. sync. Input (Composite H/V sync.)
Ground (Vert.sync.)
DDC DataGround
Vert. sync. Input DDC Clock
9
13
10
1211
1415
+5V Power
Red Output
Ground (Horiz.sync.)
Green Output
No ConnectBlue Output
Ground (Red)Ground (Green)Ground (Blue)
1
5
2
43
678
Horiz. sync. Output 
Ground (Vert.sync.)
No ConnectNo Connect
Vert. sync. OutputNo Connect
9
13
10
1211
1415
No Connect
Input
Output
DIGITAL DVI-D (DVI 24 PIN)
19172101831 1194122051321614227152381624
T.M.D.S. Data2–
No Connect
T.M.D.S. Data2+
No ConnectT.M.D.S. Data2 Shield
DDC ClockDDC DataNo Connect
1
5
2
43
678
T.M.D.S. Data1–
No Connect
T.M.D.S. Data1+
No ConnectT.M.D.S. Data1 Shield
+5V PowerGround (for +5V)Hot Plug Detect
9
13
10
1211
141516
T.M.D.S. Data0–
No Connect
T.M.D.S. Data0+
No ConnectT.M.D.S. Data0 Shield
T.M.D.S. Clock ShieldT.M.D.S. Clock+T.M.D.S. Clock–
17
21
18
2019
222324
86 
						

							Write down the PIN code number in the column below and keep it with this \
manual securely. If you forgot or lost the number and unable to operate the projector, contact the service center. 
Factory default set No:  1 2 3 4*
Factory default set No:  4 3 2 1*
* Should  the  four-digit  number be  changed,  the  factory  set number will be invalid.
Put the label below (supplied) on in a prominent place of the projector’s body while it is locked with a PIN code.
While the projector is locked with the PIN code...
PIN Code Lock No .
Logo PIN Code Lock No .
Appendix
PIN Code Number Memo
87 
						

							Appendix
Dimensions
Unit: inch (mm)
16.39

416.92

6.46(164.0)5.91(150.0)
19.27(489.5)
3.34(84.7)
6.67(169.5)14.61(371.1)
6.25(158.8)
5.91(150.0)
6.89(175.0)
2.95(75.0)1.18(30.0)
7.70(195.5)
3.78(96.0)
6.30(160.0)17.12(434.8)9.20(233.6)
4°
13.58(344.9)
3.31(84.0)
7.25(184.2)
3.80(96.6)
Screw Holes for Ceiling MountScrew: M6Depth: 0.393 (10.0)
88 
						

							Appendix
This projector provides a function to control and monitor the projector'\
s operations by using the RS-232C serial port.
Connect a RS-232C serial cross cable to CONTROL PORT on the projector and serial port on the PC.  (See p.19)
Launch a communication software provided with PC and setup the communication condition as follows:
1
2
3
Baud rate : 9600 / 19200 bpsParity check  : noneStop bit   : 1Flow control : noneData bit   : 8
Type the command for controlling the projector and then enter the "Enter" key. 
ExampleWhen you want to change the input to INPUT 2, Type 'C' '0' '6' 'Enter'. 
Note:
   Enter with ASCII 64-byte capital characters and one-byte characters.
Note:
			The	default	of	the	baud	rate	is	set	to	19200 bps.	If	an	error	occurs	in	the	communication,	change	the	serial	port	and	the	communication	speed	(baud	rate).
Serial Control Interface
Operation
List of Picture in Picture
  o : Picture in Picture combinations are enabled.  x : Picture in Picture combinations are disabled.
Note:
 •   When the input signal(s) is/are incompatible, X mark will be displayed on the Main/Sub picture. •   Depending on the frequency or signal type of PC/AV input, the display resolution may be lowered or images may not be displayed on the Main/Sub picture.         •  Inputting PC analog signals: Between 100-160 MHz         •  Inputting PC analog signals: More than 160 MHz    •  Inputting PC digital signals: More than 100 MHz    •  Inputting AV digital signals: 1080p         •  Inputting signal formats: WUXGA 1, WXGA+2, UXGA 1, UXGA 2, UXGA 3, UXGA4, D-1080p
DVI
DVI
89 
						

							The command is sent from PC to the projector with the format below;     'C' [Command] 'CR'       Command: two characters (refer to the command table below.
- The projector decodes the command and returns the 'ACK' with the format below;      'ACK'  'CR'
- When the projector can not decode the command, it returns with format below.      ‘?’  ‘CR’ 
Format
Appendix
CommandFunction
C00Turn the projector ON
C01Turn the projector OFF (immediately OFF)
C02Turn the projector OFF
C05Select Input 1
C06Select Input 2
C07Select Input 3
C08Select Network
C09Volume +
C0AVolume -
C0BSound mute ON
C0CSound mute OFF
C0DVideo mute ON
C0EVideo mute OFF
C0FScreen Normal Size
C10Screen Full Size
C1CMenu ON
C1DMenu OFF
C20Brightness UP
C21Brightness DOWN
C23Select Input 2 Video
C24Select Input 2 Y, Pb/Cb,Pr/Cr 
C25Select Input 2 RGB
C28Direct on ON
C29Direct on OFF
C33Select Input 3 Video
C34Select Input 3 S-video
C35Select Input 3 Y, Pb/Cb,Pr/Cr 
CommandFunction
C3APointer RIGHT
C3BPointer LEFT
C3CPointer UP
C3DPointer DOWN
C3FEnter
C46Zoom DOWN
C47Zoom UP
C4AFocus DOWN
C4BFocus UP
C4FSelect Input 1 HDMI
C50Select Input 1 Analog RGB
C51Select Input 1 SCART
C52Select Input 1 DVI (PC Digital)C53Select Input 1 DVI (AV HDCP) 
C5DLens shift UP
C5ELens shift DOWN
C5FLens shift LEFT
C60Lens shift RIGHT
C89Auto PC adj.
C8EKeystone UP
C8FKeystone DOWN
C90Keystone RIGHT
C91Keystone LEFT
Functional Execution Command
90