Eiki Projector Lc Ws250 User Manual

71

Appendix
Compatible Computer Specifications
Basically	this	projector	can	accept	the	signal	from	all	computers	with	the	V-,	H-Frequency	mentioned	below	
and	less	than	140	MHz	of	Dot	Clock.
		When	selecting	these	modes,	PC	adjustment	can	be	limited.
 Note:
				The	specifications	are	subject	to	change	without	notice.
Appendix
ON-SCREEN DISPLA yRESOLUTIONH-Freq .(KHz)V-Freq .(Hz)VGA	1640	x	48031.4759.88
VGA	2720	x	40031.4770.09
VGA	3640	x	40031.4770.09
VGA	4640	x	48037.8674.38
VGA	5640	x	48037.8672.81...

72

Appendix
Note:
•	The	specifications	are	subject	to	change	without	notice.
•	Depending	on	your	PC	settings,	the	digital	signals	of	your	PC	may	not	be	projected	correctly.	In	such	a	case,	
		confirm	your	PC	settings.
•	When	you	project	a	DVI	signal,	connect	the	cables,	turn	the	projector	on,	then	select	the	input.	Finally,	turn	
		on	your	PC.	Be	sure	to	follow	this	procedure,	otherwise	an	image	may	not	be	projected	on	the	screen.	If	an	
		image	is	not	projected	correctly,	restart	your	PC.
•	Do	not...

7

Technical Specifications
Appendix
● The specifications are subject to change without notice.	 The	specifications	are	subject	to	change	without	notice.● LCD panels are manufactured to the highest possible standards. Even though 99.99��of the pixels are effective, a tiny fraction of the	 LCD	panels	are	manufactured	to	the	highest	possible	standards.	Even	though	99.99��	of	the	pixels	are	effective,	a	tiny	fraction	of	the					pixels	(0.01��	or	less)	may	be	ineffective	by	the	characteristics	of	the...

74

Appendix
     Model	No.
COMPONENT~VGA Cable           : AH-98771
SCART~VGA Cable         : AH-98881
The parts listed below are optionally available. When ordering those parts, specify the item name and Model No. to the sa\
les 
dealer.
Optional Parts
This	projector	is	compliant	with	PJLink	Standard	Class	1	of	JBMIA 	(Japan	Business	Machine	and	Information	System	
Industries	Association).	 The	projector	supports	all	commands	defined	by	PJLink	Class	1	and	is	verified	conformance	with	
PJLink	Standard...

75

COMPUTER IN 1 /COMPONENT IN 
Terminal: Analog RGB (Mini D-sub 15 pin)
512341096781514131112
Configurations of Terminals
Red	(R/Cr)	Input
Ground	(Horiz.sync.)
Green	(G/Y)	Input
	-----
Blue	(B/Cb)	Input
Ground	(Red)
Ground	(Green)
Ground	(Blue)
1
5
2
4

6
7
8
5V	Power
Horiz.	sync.	Input	(Composite	H/V	sync.)
Ground	(Vert.sync.)
DDC	Data
Ground	
Vert.	sync.
DDC	Clock
9
1
10
12
11
14
15
RX	–
TX	+
TX	–
RX	+
2

4
8 7 6 5 4 3 2 1
5
6
7
8
1
LAN TERMINAL
-----
-----
-----
-----
CONTROL PORT...

76

Write	down	the	PIN	code	number	in	the	column	below	and	keep	it	with	this	manual	securely.	If	you	forgot	or	lost	
the	number	and	unable	to	operate	the	projector,	contact	the	service	center.	
PIN Code Number Memo
Factory	default	set	No:		1	2	3	4*
Factory	default	set	No:		4	3	2	1*
Put	the	label	 below	 (supplied)	 on	in	a	prominent	 place	of	the	
projector's	body	while	it	is	locked	with	a	PIN	code.
While	the	projector	is	locked	with	the	PIN	code.
PIN Code Lock No .
Logo PIN Code Lock No .
*Should...

77

Dimensions
Appendix
6.56(166.7)6.29(159.8)
0.70(17.9)0.34(8.7)
0.55(14.0)1.14(29.0)
1.46(37.1)
2.51(63.8)
4.29(109.0)
3.02(76.8)1.14(29.0)
1.62(41.1)
10.54(267.8)
12.80(325.0)
1.46(37.1)2.51(63.8)
4.33(110.0)8.27(210.1)7.03(178.7)
6.39(162.2)1.15(29.3)
8.86(225.0)
15.04(382.0)
8.07(205.0)4.65(118.1)1.34(34.0)6.85(174.1)
2.76(70.0)
7.09(180.0)
1.42(36.1)
5.30(134.7)10.71(272.0)
1.65(42.0)
7.09(180.0)
1.54(39.0)
5.52(140.3)
13.78(350.0)
4.08(121.9)
Unit:	inch(mm)
Screw	Holes	for	Ceiling	MountScrew:...

KJ8BD
U.S.A.
EIKI International, Inc. 
30251 Esperanza 
Rancho Santa Margarita 
CA 92688-2132 
U.S.A.
Tel :   800-242-3454 (949)-457-0200 
Fax :   800-457-3454 (949)-457-7878 
E-Mail : [email protected] 
Deutschland & Österreich 
EIKI Deutschland GmbH 
Am Frauwald 12 
65510 Idstein 
Deutschland 
Tel :   06126-9371-0 
Fax :   06126-9371-14 
E-Mail : [email protected] 
China
EIKI (Shanghai) Co., Ltd. 
Lakeside Oasis Middle Ring Business Centre 
Block 10. #16-07, 
1628, Jin Sha Jiang Road, 
Shanghai, 200333. China...