Eiki Projector Lc Ws250 User Manual

51

Setting
Standby mode
This	function	is	available	when	operating	the	projector	via	
network.
 Network	....	Supply	 the	power	 to	the	 network	 function	 even	
after	turning	off	the	projector.	 You	can	turn	on/
off	the	projector	via	network,	modify	network	
environment,	and	receive	an	e-mail	about	
projector	status	while	the	projector	is	powered	
off.
 Eco	............	Select	Eco	when	you	do	not	use	the	projector	
via	network.	 The	projector’s	network	function	
will	stop	when	turning	off	the...

52

Direct on
When	this	function	is	set	to	On,	the	projector	will	be	automatically	
turned	on	just	by	connecting	the	AC	power	cord	to	a	wall	outlet.	
Note:
 		Be	sure	to	turn	off	the	projector	properly	(see	“Turning	Off	
the	Projector”	on	page	20).	If	the	projector	is	turned	off	in	
the	incorrect	sequence,	the	Direct	on	function	does	not	work	
properly.
Setting
This	function	allows	you	to	change	the	presentation	of	the	P-timer	
and	execute	it.
Select	one	of	the	following	options:
 Count up...

5

SettingSetting
Closed caption
Closed	Caption	is	a	function	that	displays	the	audio	portion
of	a	TV	program	as	text	on	the	screen.		If	the	input	signal	
contains	Closed	captions,	you	can	turn	on	the	feature	and	
switch	the	channels.	Press	the	Point	▲▼	buttons	to	select	
Off,	CC1,	CC2,	CC	or	CC4.		
If	the	Closed	caption	is	not	clear,	you	can	change	the	text	
from	Color	to	White.
Closed caption
Note:
The	Closed	caption	is	available	only	under	the	situation	
below ..
	 	• When the input signal...

54

Remote controlThis	projector	 provides	two	different	 remote	control	codes:	
the	factory-set	 initial	code	(Code 1)	and	 the	secondary	 code	
(Code  2).	This	 switching	 function	prevents	 remote	control	
interference	 when	operating	 several	projectors	 or	video	
equipment	at	the	same	time.
When	 operating	 the	projector	 in	Code  2,	both	 the	projector	
and	the	remote	control	must	be	switched	to	Code 2.
To change the code for the projector:
Select	either	Code 1	or	Code 2	in	this	Setting	Menu.
To...

55

Setting
This	function	 allows	you	to	use	 the	PIN	 code	 lock	function	 to	
set	the	security	for	the	projector	operation.
Setting
Security (Key lock and PIN code lock)
Key	lock
Key	lock
PIN	code	lock
This	function	locks	the	top	control	and	remote	control	
buttons	to	prevent	operation	by	unauthorized	persons.
	 . . . . .Unlocked.
	 . . . . .Lock	the	operation	of	the	top	control.
To	unlock,	use	the	remote	control.
 	 . . . . .Lock	the	operation	of	the	remote	
control.	To	unlock,	use	the	top	control....

56

Setting
Use	the	Point	▲▼	buttons	to	select	Off,	On 1	or	On 2.	
Press	the	SELECT	button	to	close	the	dialog	box.
Change	the	PIN	code	lock	setting
Enter	a	PIN	code
Use	the	Point	▲▼	buttons	to	enter	a	number.	Press	the	
Point	►	button	to	fix	the	number	and	move	the	red	frame	
pointer	to	the	next	box.	 The	number	changes	to.	If	you	
fixed	an	incorrect	number,	use	the	Point	◄	button	to	move	
the	pointer	to	the	number	you	want	to	correct,	and	then	
enter	the	correct	number.
Repeat	this	step	to	complete...

57

This	function	provides	the	following	options	in	the	cooling	
fans’	operation	when	the	projector	is	turned	off	(p.20).
 L 1	.....	Normal	operation
 L 2	.....	Slower,	lower-sound	and	longish-time	than	the	
normal	operation	(L1).
Setting
Fan control
This	function	is	used	to	display	the	cumulative	lamp	
operating	time	and	reset		the	lamp	counter.	
When	the	total	lighting	time	of	a	lamp	exceeds	the	
recommended	total	hours	of	use,	the	Lamp	replacement	
icon	 (Fig.1)	 will	appear	on	 the	screen,...

58

Factory default
This	function	returns	all	setting	values	except	for	the	User 
logo,	PIN code lock,	Logo PIN code lock,	Lamp counter 
and	Filter counter	to	the	factory	default	settings.
Factory default
Warning log
This	function	records	anomalous	operations	while	the	
projector	is	in	operation	and	use	it	when	diagnosing	faults.	
Up	to	10	warning	logs	are	displayed	with	the	latest	warning	
message	at	the	top	of	the	list,	followed	by	previous	warning	
messages	in	chronological	order.	
Note:
			When	the...

59

Input Source Information Display
The	Information	Menu	is	used	for	checking	the	status	of	the	image	signal	being	projected	and	the	operation	of	
the	projector.
H-sync freq .
V-sync freq .
Lamp counter
Information Menu
The	horizontal	frequency	of	the	input	signal	is	displayed	in	
KHz,	or	- - - -KHz	when	no	signal.
The	vertical	frequency	of	the	input	signal	is	displayed	in	Hz,	
or	- - - - Hz		when	no	signal.	Numbers	of	Hz	doubles	when	
during	Interlace.
The	cumulative	lamp	operating	time	is	displayed....

60

The	WARNING	indicator	shows	the	state	of	the	function	which	protects	the	projector.	Check	the	state	of	the	
WARNING	indicator	and	the	POWER	indicator	to	take	proper	maintenance.	
WARNING indicator
The projector is shut down and the WARNING 
indicator is blinking red .
When	the	temperature	inside	the	projector	reaches	a	
certain	level,	the	projector	will	be	automatically	shut	down	to	
protect	the	inside	of	the	projector.	The	POWER	indicator	is	
blinking	while	the	projector	is	being	cooled	down.	When...