Eiki Projector Lc Ws250 User Manual

21

How to Operate the On-Screen Menu
The	projector	can	be	adjusted	or	set	via	the	On-Screen	
Menu.	The	menu	has	a	hierarchical	structure,	with	a	main	
menu	that	is	divided	into	submenus,	which	are	further	
divided	into	other	submenus.	For	each	adjustment	and	
setting	procedure,	refer	to	respective	sections	in	this	
manual.
Use	the	Point	▲▼	buttons	to	highlight	and	select	a	
main	menu	item.	Press	the	Point	►	or	the SELECT 	
button	to	access	the	submenu	items.	(The	selected	
item	is	highlighted	in...

22

Menu Bar
For	detailed	functions	of	each	menu,	see	“Menu	Tree”	on	pages	68-69.
①
②
③
④
⑤
⑥
⑦
⑧
Main	MenuSub-Menu
⑨
⑩
③ Image select
 For	computer	source,	used	to	select	an	image	mode	from	among	Dynamic,	Standard,	Real,	Blackboard(Green),	
Colorboard	and	Image 1-4.		(p.33)
						For	video	or	HDMI	source,	used	to	select	an	image	mode	among	Dynamic,	Standard,	Cinema,	Blackboard(Green),	
Colorboard	and	Image 1-4.		(p.40)
④ Image adjust
	 For	computer	source,	used	to	adjust	computer	image	[Contrast,...

2

Focus Adjustment
Auto	setup	function	is	provided	to	automatically	execute	
the	setting	of	Auto	setup	(includes	Input	search	and	 Auto	
PC	adj.	functions)	in	the	Setting	Menu	by	just	pressing	the	
AUTO	SET	button	on	the	remote	control.	Refer	to	page	45	
for	the	setting	of	the	 Auto	setup	function.
Note:
   Fine sync,	Total dots,	Horizontal	and	Vertical	position	
of	some	computers	can	not	be	fully	adjusted	with	the	 Auto	
PC	adjustment	function.	When	the	image	is	not	provided	
properly	with	this...

24

Sound Adjustment
1
2
Press	the	MENU	button	to	display	the	On-Screen	Menu.	
Use	the	Point	▲▼	buttons	to	select	Sound.	Press	the	
Point	►	or	the	SELECT	button	to	access	the	submenu	
items.	
Press	the	VOLUME+/–	buttons	on	the	remote	control	or	on	
the	top	control	to	adjust	the	volume.	 The	volume	dialog	box	
appears	on	the	screen	for	a	few	seconds.
Press	the	MUTE	button	on	the	remote	control	to	select	On 
to	temporarily	turn	off	the	sound.	To	turn	the	sound	back	
on,	press	the	MUTE	button	again	to...

25

Remote Control Operation
Using	the	remote	control	for	some	frequently	used	operations	is	advisable.	Just	pressing	one	of	the	buttons	
enables	you	to	make	the	desired	operation	quickly	without	calling	up	the	On-Screen	Menu.
Press	the	COMPUTER	1/2,	HDMI,	VIDEO,	S-VIDEO	and	
COMPONENT	buttons	on	the	remote	control	to	select	the	
input	source.		See	pages	27-28,	37-38	for	details.
COMPUTER 1/2, HDMI, VIDEO, S-VIDEO and 
COMPONENT buttons
Display	the	input	source	information:	Input,	H-sync freq .,	
V-sync...

26

Press	the	NO	SHOW	button	on	the	remote	control	to	black	
out	the	image.	To	restore	to	normal,	press	the	NO	SHOW	
button	again	or	press	any	other	button.	When	the	projected	
image	is	captured	and	is	set	as	User	in	the	Logo	selection	
(p.47),	the	screen	changes	each	time	you	press	the	NO	
SHOW	button	as	follows.
black	out	→	the	captured	image	→	normal	→	•	•	•	•	•
NO SHOW button
Press	the	P-TIMER	button	on	the	remote	control	to	operate	
the	Count	up/Count	down	function.	Refer	to	p.52	for	detail	of...

27

HDMI
ASPECT

Choose	Computer 1(RGB)	by	pressing	the	COMPUTER	1	
button	on	the	remote	control	or	press	the	INPUT	button	on	
the	top	control.	
Before	using	these	buttons,	correct	input	source	should	be	
selected	through	Menu	operation	as	described	below.
1
Input Menu
2

Input Source Selection (Computer 1: RGB)
Computer Input 
COMPUTER 1 button
Note:
	 	 When	the	Input	Search	function	is	set	to	On 1	or	On 2	in	
the	Auto	setup	function,	the	input	signal	will	be	searched	
automatically	(p.45)....

28

Choose	Computer 2 (RGB)	by	press	the	COMPUTER	2	
button	on	the	remote	control	or	press	the	INPUT	button	on	
the	top	control.	
Before	using	these	buttons,	correct	input	source	should	be	
selected	through	Menu	operation	as	described	below.
Note:
	 	 When	the	Input	Search	function	is	set	to	On 1	or	On 2	in	
the	Auto	setup	function,	the	input	signal	will	be	searched	
automatically	(p.45).
HDMI
ASPECT
COMPUTER 2 button
Remote Control
1
2
Press	the	MENU	button	to	display	the	On-Screen	
Menu.	Press	the...

29

PC System Menu
PC System Menu
Computer System Selection
This	projector	automatically	tunes	to	various	types	of	computers	with	its	Multi-scan	system	and	Auto	PC	
adjustment.	If	a	computer	is	selected	as	a	signal	source,	this	projector	automatically	detects	the	signal	format	
and	tunes	to	project	a	proper	image	without	any	additional	settings.	(Signal	formats	provided	in	this	projector	are	
shown	on	pages	71-72.)
One	of	the	following	messages	may	appear	when:
When	the	projector	can	not	recognize	the...

0

Auto	PC	adjustment	function	is	provided	to	automatically	adjust	Fine sync,	Total dots,	Horizontal	and	Vertical 
positions	to	conform	to	your	computer.
PC adjust Menu
Auto PC adjustment
To store adjustment parameters
The	adjusted	parameters	from	the	Auto	PC	adjustment	can	
be	stored	in	the	projector.	Once	the	parameters	are	stored,	
the	setting	can	be	done	just	by	selecting	a	Mode (1-10)	in	
the	PC	System	Menu	(see	page	29).	See	also	“Store”	on	
page	32.
Note:
 • Fine sync,	Total dots,...