Eiki Projector Lc Wgc500a User Manual

							81
When an input signal is digital, refer to the chart below.
PC Adjust Menu cannot be selected when Input 1 (HDMI) is selected in the I\
nput Menu.
✔Notes:
	 •	When	the	input	signal	is	D-WXGA	+1	images	may	not	be	displayed	properly	depending	on	 computers
	 •	Specifications	are	subject	to	change	without	notice..
Appendix
ON-SCREEN 
DISPLA y RESOLUTION H-Freq .
(kHz) V-Freq .
(Hz)
D-VGA 640x480 31.470 59.940 
D-480p 720x48031.470 59.880 
D-575p 768x57531.250 50.000 
D-SVGA 800x60037.879 60.320 
D-XGA 1024x768 43.363 60.000 
D-WXGA 1 1366x76848.360 60.000 
D-WXGA 2 1360x76847.700 60.000 
D-WXGA 3 1376x76848.360 60.000 
D-WXGA 4 1360x76856.160 72.000 
D-WXGA 5 1366x76846.500 50.000 
D-WXGA 6 1280x76847.776 59.870 
D-WXGA 7 1280x76860.289 74.893 
D-WXGA 8 1280x76868.63384.837
D-WXGA 9 1280x80049.60060.050
D-WXGA 10 1280x80041.20050.000
D-WXGA 11 1280x80049.70259.810
D-WXGA 12 1280x80063.98060.020ON-SCREEN 
DISPLA y RESOLUTION H-Freq .
(kHz) V-Freq .
(Hz)
D-SXGA 1 1280x1024 63.98060.020
D-SXGA 2 1280x1024 60.276 58.069 
D-SXGA +1 1400x105063.97060.190
D-SXGA +2 1400x105063.35060.120
D-SXGA +3 1400x105065.12059.900
D-UXGA1 1600x1200 75.00060.000
D-WUXGA2 1920x120074.03859.950
D-WSXGA+1 1680x105065.29059.954
D-WXGA+1 1440x90055.93559.887
D-720p 1280x720 45.000 60.000 
D-1035i 1920x1035 33.750
60.000 
(Interlace)
D-1080i 1920x1080 33.75060.000 
(Interlace)
D-1080i 1920x1080 28.12550.000
(Interlace)
D-1080psf/30 1920x108033.75060.000
D-1080psf/25 1920x108028.12550.000 
						

							82
Appendix
List of Picture in Picture
 o : Picture in Picture combinations are enabled
 - : Picture in Picture combinations are disabled
✔Note:
	 •		When	the	input	signal(s)	is/are	incompatible,	X	mark	will	be	displayed	on	the	Main/Sub	picture.
	 •		 Depending	 on	the	 frequency	 or	signal	 type	of	PC/AV	 input,	the	display	 resolution	 may	be	lowered	 or images	 may	not	be	
displayed	on	the	Main/Sub	picture.
　　
   •		Inputting	PC	analog	signals:	Between	100-140	MHz
　　
   •		Inputting	PC	analog	signals:	More	than	140MHz
   •		Inputting	PC	digital	signals:	More	than	100MHz
   •		Inputting	 AV	digital	signals:	1080p
Monitor Output at the PIP mode:
		Usually	output	the	RGB	analog	or	Component	signals	of	Main	picture	side.	 When	the	Main	picture	is	selected	
	Component	signals	and	Sub	picture	is	selected	analog	RGB	signals,	output	analog	RGB	signals	of	Subpicture	side	
	exceptionally.
SUB
Input1 Input2Input3
Network
RGB ScartHDMIRGBVideo
ComponentVideoS-Video
MAIN Input1
RGB
-		
-  
-  o   o   o  o  o   o  
Scart-  -  -  o   -   o   -  -   o  
HDMI-  -  -  o   o   o  o  o   -  
Input2 RGB
o  
o  o   -  -   -  o  o   o  
Videoo  -  o   -  -   -  -  -   o  
Componento  o  o   -  -   -  o  o   o  
Input3 Videoo  
-  o   o   -   o   -  -   o  
S-Videoo  -  o   o   -   o   -  -   o  
Networko  o   -  o   o   o  o  o   -   
						

							83
Technical Specifications
Mechanical Information 
 Projector Type      Multi-media Projector 
  Dimensions (W x H x D)    21.66” x 6.89” x. 17.76” (451.0 mm x 175.0 mm x 550.1 mm) 
  Net Weight     
32.4 lbs (14.7 kg) (LC-WGC500AL) / 34.0 lbs (15.4 kg) (LC-WGC500A) 
  Feet Adjustment      0˚ to 3.5˚                 
Panel Resolution 
 LCD Panel System      0.95” TFT Active Matrix type, 3 panels  
  Panel Resolution      1280 x 800 dots 
  Number of Pixels      3,072,000 (1,280 x 800 x 3 panels)           
Signal Compatibility 
 Color System     PAL, SECAM, NTSC, NTSC4.43, PAL-M, and PAL-N 
  SD/HDTV Signal      480i, 480p, 575i, 575p, 720p, 1035i, and 1080i
 
 Scanning Frequency     H-sync. 15 kHz–100 kHz, V-sync. 50 Hz–100 Hz     
  
Optical Information 
 Projection Image Size ( Diagonal )  Adjustable from 30” to 300” ( LC-WGC500A )
  Throw Distance      4.3’ - 34.4’ (1.3 m - 10.5 m) (LC-WGC500A )
  Projection Lens      F=1.7 to 2.1, f=33 to 43 mm with motor zoom and focus (LC-WGC500A)
  Projection Lamp      330 W NSHA(1 lamp + 1 lamp)
 
 
Interface
  Input 1        HDMI x 1, Analog (Mini D-sub 15 pin) x 1  
  Input 2        BNC Type x 5 (G or Video/Y, B or Cb-Pb, R or Cr-Pr, HV and V) 
  Input 3        RCA Type x 1, Mini DIN 4 pin x 1 
 
AUDIO IN        Audio 1 (Mini Type stereo), Audio 2 (Mini Type stereo), Audio 3 (RCA Type) x 2 
 Analog Out     Mini D-sub 15 pin x 1 
 Audio Out      Audio (Mini Type stereo) x 1 
  R/C Jack        Mini Type (Wired Remote) x 1 
  Control Port      D-sub 9 pin x 1  
  USB Connector       USB Series B x 1 
  Option        Pj-to NetDirector Terminal x 1 
 
Audio 
  Internal Audio Amp      3.0 W + 3.0W (stereo) 
  Built-in Speaker      2 speaker,  1.97” x 3.54” (50 x 90 mm) 
 
Power
  Voltage and Power Consumption  AC 100–120 V (5.3A Max. Ampere), 50/60 Hz (The U.S.A and Canada) 
          AC 200–240 V (2.5A Max. Ampere), 50/60 Hz (Continental Europe and The U.K.)   
   
Operating Environment
 Operating Temperature    41˚F–104˚F (5˚C–40˚C) 
  Storage Temperature    14˚F–140˚F (-10˚C–60˚C) 
 
Remote Control  
  Battery        AAA or LR03 Type x 2             
  Operating Range      16.4’ (5 m/±30˚) 
  Dimensions      1.8” (W) x 1.0” (H) x 5.7” (D) (45 mm x 25 mm x 145 mm)       
  Net Weight      3.5 oz (99 g) (including batteries)           
  Laser Pointer     
Class II Laser (Max. Output: 1 m W/Wave length: 640–660 nm)  
Appendix 
						

							84
The parts listed below are optionally available. When ordering those parts, specify the item name and Model No. 
to the sales dealer.
Optional Parts
Accessories
 Owner’s Manual (CD-ROM) 
  Quick Reference Guide 
  AC Power Cord 
  Remote Control and Batteries 
  VGA Cable 
  USB Cable 
  Remote Control Cable 
  Lens Cap (for LC-WGC500A)
  Lens Mount Cover (for LC-WGC500AL)
  PIN Code Label 
  Lens Antitheft Screw 
*
* Contact the dealer where you purchased the projector or the service center about the Lens Antitheft Screw.
l  The specifications are subject to change without notice.
l  LCD panels are manufactured to the highest possible standards. Even though 99.99% of the pixels are effective, a tiny 
fraction of the pixels (0.01% or less) may be ineffective by the characteristics of the LCD panels.
Appendix
      Model No.
Long Zoom Lens    : AH-23541 
Short Fixed Lens    : AH-23631 
Standard Lens    : AH-23421 (only  LC-WGC500AL) 
Ultra Long Zoom Lens     : AH-23661 
Short Zoom Lens    : AH-23511 
Pj-to NetDirector    : PjNET-50  
						

							85
This projector is compliant with PJLink Standard Class 1 of JBMIA (Japan Business Machine and Information 
System Industries Association). The projector supports all commands defined by PJLink Class 1 and is verified 
conformance with PJLink Standard Class 1.
PJLink is a registered trademark of JBMIA and pending trademark in some \
countries.
PJ Link Notice
Appendix
Projector Input
RGB
RGB (Scart)
RGB (PC analog)
Video
Component
PJLink Input
RGB 3
RGB 2
RGB 1
VIDEO 1
VIDEO 2
Video
S-video
VIDEO 3
VIDEO 4
Input 2
Input 3
Parameter
13
12
11
21
22
23
24
RGB (HDMI)DIGITAL 131
Input 1
NetworkNETWORK 151Input 4 
						

							86
Terminal : D-sub 9 pin
CONTROL PORT CONNECTOR
Vcc
- Data
+ Data
Ground
1
2
3
4
2
34 1
INPUT 1/ANALOG OUT
Terminal: Analog RGB (Mini D-sub 15 pin)
512341096781514131112
Configurations of Terminals
USB CONNECTOR (Series B)
Appendix
-----
R X D
T X D
-----
SG
-----
RTS
CTS
Serial
1
2
3
4
5
6
7
8
-----9
Red Input
Ground (Horiz.sync.)
Green Input
No Connect
Blue Input
Ground (Red)
Ground (Green)
Ground (Blue)
1
5
2
4
3
6
7
8
Horiz. sync. Input (Composite H/V sync.)
Ground (Vert.sync.)
 DDC Data
Ground
Vert. sync. Input
 DDC Clock
9
13
10
12
11
14
15
+5V Power
Red Output
Ground (Horiz.sync.)
Green Output
No Connect
Blue Output
Ground (Red)
Ground (Green)
Ground (Blue)
1
5
2
4
3
6
7
8
Horiz. sync. Output 
Ground (Vert.sync.)
No Connect
No Connect
Vert. sync. Output
No Connect
9
13
10
12
11
14
15
No Connect
Input
Output
13579111315171918161412108642
TMDS Data 2+  Input
Ground (TMDS Data 1)
Ground (TMDS Data 2)
TMDS Data 1+ Input
TMDS Data 2- Input
TMDS Data 1- Input
TMDS Data 0+ Input
Ground (TMDS Data 0)
1
5
2
4
3
6
7
8
Ground (TMDS Clock)
SCL
TMDS Clock- Input
-----
-----
SDA
Ground (DDC/CEC)
11
15
12
14
13
16
17
19 Pin Type A
TMDS Data 0- Input
TMDS Clock+ Input
9
10
Plug insert detection19
18+5V Power
HDMI 
						

							87
Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or 
lost the number and unable to operate the projector, contact the service station. 
PIN Code Number Memo
Factory default set No: 1 2 3 4*
Factory default set No: 4 3 2 1*
* Should the four-digit number be changed, the 
factory set number will be invalid.
While the projector is locked with the PIN code...
Put the label below (supplied) on in a prominent place of the 
projector’s body while it is locked with a PIN code.
PIN Code Lock No  .
Logo PIN Code Lock No  .
Appendix 
						

							88
AppendixDimensions
3.94 (100.0) 3.94 (100.0)
10.85 (275.5)3.15 (80.0)
5.55 (141.0) 5.55 (141.0) 6.89 (175.0)
3.70 (94.0)
(PANEL CENTER)
3.44 (87.3) 17.76 (451.0)
15.59 (396.0)
21.66 (550.1)
3.5 ÃMAX
Scre
w Holes f or Ceiling Mount
Scre w: M6
Depth:  0.393 (10.0)
Unit: inch (mm) 
						

							© 2009 Eiki International, Inc.KV5BA
U.S.A.
EIKI International, Inc. 
30251 Esperanza 
Rancho Santa Margarita 
CA 92688-2132 
U.S.A.
Tel :   800-242-3454 (949)-457-0200 
Fax :   800-457-3454 (949)-457-7878 
E-Mail : [email protected] 
Deutschland & Österreich 
EIKI Deutschland GmbH 
Am Frauwald 12 
65510 Idstein 
Deutschland 
Tel :   06126-9371-0 
Fax :   06126-9371-14 
E-Mail : [email protected] 
China
EIKI (Shanghai) Co., Ltd. 
Lakeside Oasis Middle Ring Business Centre 
Block 10. #16-07, 
1628, Jin Sha Jiang Road, 
Shanghai, 200333. China 
Main Line :    86-21-3251-3993 
Service Hot Line :  86-21-3251-3995 
Fax :      86-21-3251-3997 
E-mail : [email protected] 
Canada
EIKI CANADA - Eiki International, Inc. 
P.O. Box 156, 310 First St. - Unit 2, 
Midland, ON, L4R 4K8, Canada 
Tel :   800-563-3454 (705)-527-4084 
Fax :   800-567-4069 (705)-527-4087 
E-Mail : [email protected] 
Eastern Europe 
EIKI CZECH SPOL. s.r.o. 
Nad Cementárnou 1163/4a 
Praha 4, Podolí 
147 00 
Czech Republic 
Tel :   +420 241 410 928 
  +420 241 403 095 
Fax:  +420 241 409 435 
E-Mail : [email protected] 
South East Asia 
EIKI Industrial (M) Sdn Bhd 
No. 3A-2C, 4th Floor, Jalan PJU 8/3A, 
Perdana Business Centre, 
Bandar Damansara Perdana, 
47820 Petaling Jaya, Selangor 
Malaysia 
Tel :   +603-7722-4362 
Fax :   +603-7722-4392 
E-Mail : [email protected] 
Japan & Worldwide 
EIKI Industrial Company Limited. 
4-12 Banzai-Cho, Kita-Ku, Osaka, 
530-0028 Japan 
Tel :   +81-6-6311-9479 
Fax :   +81-6-6311-8486 
WorldWide Website   http://www.eiki.com