Eiki Projector Lc Wgc500a User Manual

MULTIMEDIA PROJECTOR
MODEL LC-WGC500A   
  LC-WGC500AL
OWNER’S MANUAL
✽ Projection lens is optional.
✽ 

2
◆ Functionally Rich
 This projector has many useful functions such as lens 
shifting, ceiling and rear projection, perpendicular 
omnidirectional projection, variety of lens options, 
etc.
◆  Auto Lamp Selection System
 The projector is equipped with 2 projection lamps and 
automatically  switches  the  active  lamp  between  2 
lamps.(p.66)
◆ Multi-use Remote Control
 Use the remote control as wired and wireless, or as a 
PC wireless mouse. Eight remote control codes and 
selectable pointer shapes are...

3
Trademarks
Each  name  of  corporations  or  products  in  this  book  is  either  a  registered  trademark  or  a  trademark  of  its  respective 
corporation.
Features and Design . . . . . . . . . . . . . . . .2
Table of Contents  . . . . . . . . . . . . . . . . . . 3
To the Owner   . . . . . . . . . . . . . . . . . . . . . 4
Safety Instructions  . . . . . . . . . . . . . . . . . 5
Air Circulation  6
Installing the Projector in Proper Directions  7
Positioning Precautions  7
Moving the Projector  8...

4
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, 
DO NOT REMOVE COVER (OR BACK) .  NO 
USER-SERVICEABLE PARTS INSIDE EXCEPT 
LAMP REPLACEMENT  . REFER SERVICING TO 
QUALIFIED SERVICE PERSONNEL .
THIS SYMBOL INDICATES THAT DANGEROUS 
VOLTAGE CONSTITUTING A RISK OF ELECTRIC 
SHOCK IS PRESENT WITHIN THIS UNIT.
THIS SYMBOL INDICATES THAT THERE ARE 
IMPORTANT OPERATING AND MAINTENANCE 
INSTRUCTIONS IN THE OWNER'S MANUAL 
WITH THIS UNIT.
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
Before installing and...

5
All the safety and operating instructions should be read 
before the product is operated.
Read all of the instructions given here and retain them 
for later use. Unplug this projector from AC power supply 
before cleaning. Do not use liquid or aerosol cleaners. Use 
a damp cloth for cleaning.
Follow all warnings and instructions marked on the 
projector.
For added protection to the projector during a lightning 
storm, or when it is left unattended and unused for long 
periods of time, unplug it from...

6
Openings in the cabinet are provided for ventilation. 
To ensure reliable operation of the product and to 
protect it from overheating, these openings must not 
be blocked or covered. 
 CAUTION
Hot air is exhausted from the exhaust vent. When 
using or installing the projector, the following 
precautions should be taken. 
– Do not put any flammable object or spray can near 
the projector, hot air is exhausted from the air 
vents.
–  Keep the exhaust vent at least 3’ (1 m) away from 
any objects.
–  Do...

7
Use the projector properly in specified positions. Improper positioning \
may reduce the lamp life and result in 
severe accident or fire hazard.
This projector can project the picture in upward, downward, or inclined position in perpendicular direction to the 
horizontal plane. 
Installing the Projector in Proper Directions
✔Note:
	 •	To	inverse	or	reverse	the	image,	set	the	ceiling	function	to	“On.”	(p.	45)
Avoid positioning the projector as described below when installing.
Positioning Precautions
Do...

8
Safety Instructions
Use the hand grip when moving the projector.
Replace the lens cap and retract the adjustable feet to 
prevent damage to the lens and cabinet when carrying. 
When the projector is not in use for an extended period, put 
it into a suitable case to protect the projector.
 
CAUTION IN CARRyING OR 
TRANSPORTING THE PROJECTOR
–  Do  not  drop  or  bump  the  projector,  other wise  damages 
or malfunctions may result.
–  When  carr ying  the  projector,  use  a  suitable  carr ying...

9
AC Power Cord for the United Kingdom:
This cord is already fitted with a moulded plug incorporating a fuse, the value of which is indicated on the pin face of the 
plug. Should the fuse need to be replaced, an ASTA approved BS 1362 fuse must be used of the same rating, marked thus 
A S A. If the fuse cover is detachable, never use the plug with the cover omitted. If a replacement fuse cover is required, 
ensure it is of the same colour as that visible on the pin face of the plug (i.e. red or orange)....

10
!1 Infrared Remote Receiver (Back)
!2  Lamp Cover
!3  Filter Cover
!4  Exhaust Vent
!5  Security Chain Hook
!6  Air Intake Vent
!7	 Hand Grip
Bottom Back
!7
!6
 CAUTION
Hot air is exhausted from the exhaust vent.  
Do not put heat-sensitive objects near this 
side.
y
we
Front
iu
i
Part Names and Functions
yt
rq
!0
o
!1!2!3
!4!5!4
✽Kensington Security Slot This slot is for a Kensington lock used 
to deter theft of the projector.
* Kensington is a registered trademark of ACCO Brands 
Corporation.
✽
This...