Eiki Projector Lc Wb200w User Manual

11PJ NETWORK MANAGEROWNER'S MANUAL

Addition of the target
1  Select Target  Addition  from Target  menu.  The  target 
information registering window appears.
2  Enter  target  setup  information  and  click Update  button. 
The  information  set  on  the  target  equipment  are  dis-
played on the system information items.
0   
When  the  target  equipment  is  not  operating,  or  it  is  not  the monitoring equipment, the error dialog "Cannot obtain  infor-mation" will appear.
3   Click...

1

Chapter 3 Basic Operation

Setting up the warning value
PJ  Network  Manager  provides  a  function  to 
display  the  alert  when  the  use  time  of  the  set-
ting  item  reaches  a  specified  setting  time. The 
available  setting  items  (use  time)  are  depend-
ing on the target equipment.
1  Select a target on the status list with right click.
0  
When  setting  multiple  targets  together,  select targets with pressing "Shift" or "Control" key.
2   Select Warning value...

1PJ NETWORK MANAGEROWNER'S MANUAL

What's Trap
Trap is the event predefined by the SNMP agent. If the predefined event ( "When PJ lamp is 
off ",  "When  internal  PJ  power  circuit  is  failed"  etc.  )  happens,  target  sends  trap  information 
to the SNMP manager.
When happens the alert on the target
When happens the alert on the target
If  the  abnormality  or  connection  error  happens  on  the  target,  PJ  Network  Manager  indi-
cates target name, icon and status...

1

Chapter 3 Basic Operation

Displaying all the status information of the target
Select  a  target  and  click  button  on  the  tool  bar. The  following  status  window  appears 
and displays all the available status information of the target.
0  
The target name and item which have an abnormality or connection error happen-ing are indicated with red.
0   
W h e n   PJ   N e t w o r k   M a n a g e r   c a n n o t acquire  the  value  of  column  information,  "---"  is displayed....

1PJ NETWORK MANAGEROWNER'S MANUAL

Setting up the password of Telnet
The  password  of  telnet  can  be  set  up  by  the  procedure  below.  It  is  necessary  to  make  a 
password, same as the network password.
1  Select a target which you want to set up the password of telnet from the status list. You 
can select multiple targets.
2  Select Telnet  setting  from Target  menu, Telnet  setting  dialog  box  will  appear  as  the 
below figure. Set a password and click OK button. When multiple...

1

Chapter 3 Basic Operation

Commands batch processing : Available CommandItems Description
Power ON/OFF .........................  
Sets up the Power ON or Power OFF.Input,Source .............................. Sets up the Input and Source. Selects Input and Source.Screen  .......................................  
Sets up the screen size. Resizes the picture screen.Background ............................... Sets up the background. Selects the background screen for when no input signal is...

1PJ NETWORK MANAGEROWNER'S MANUAL

Setting up default setting
The monitoring information and e-mail information can be set up by the procedure below.
1  Select System default setting from System menu. The setting window will appear.
2  Switch by clicking Monitoring information or E-mail information tab for each setting.
Monitoring informationItems  Description
Monitoring interval ................  
Sets up the interval of the polling in minute unit. (1 to 99 minutes can be set)Temperature unit...

1

Chapter 3 Basic Operation

E-mail informationItems Description
SMTP server .....................  
Sets up the IP address of SMTP mail server or server host name.Administrator'smail address ...................... Sets up the e-mail address of administratorDestination mail address  ................................  
Sets up the destination mail address when the event (ALERT, TRAP, SYSERR) happens on the target. The mail address entering window appears when clicking Add button.
E-mail...

1PJ NETWORK MANAGEROWNER'S MANUAL

Customizing the status list
Changing the status column indication
1  Select Column selection from System menu. The col-
umn selection window will appear.
2  On  the  window,  check  the  column  name  to  be  indi-
cated on the status list.
0   
The  mark  [*]  next  to  the  column  name  indicates  aler t item.
3  
To  change  the  order  of  the  display  column  on  the 
status  list,  select  a  column  you  intend  to  change  the 
order and click To up...

0

Chapter 3 Basic Operation

Column Description
*Error info. ...................................Error information (Not available for the projector)IP address  ....................................IP address of the network equipmentCommunity  ................................Community name of the network equipment (public)Introduction date*1 ...............Date of the network equipment installedTimer  ...............................................Timer informationProduct info....