Eiki Projector Lc Wb200w User Manual

PJ Network Manager for Windows
SNMP Manager Software
This is the manual for the PJ Network Manager software.  
This software is Windows-compliant, but non-Mac-compliant.
Read this manual thoroughly to operate the PJ Network Manager software.
First, read the owner's manual of the projector to understand the basic oper-
ation of the projector and the safety instructions.
The safety instructions in the owner's manuals should be followed strictly.
Owner's Manual
 for WB200 



Contents ........................................................................\
..........2
Chapter 1 Introducing  ..........................................................3
Introducing  ........................................................................\
........................................................................\
......3
SNMP  ........................................................................\
........................................................................\...

PJ NETWORK MANAGEROWNER'S MANUAL

Introducing
This  PJ  Network  Manager  is  a  SNMP  manager  software  for  the  network  equipment  which 
supports the private MIB (Management Information Base).
By  installing  the  PJ  Network  Manager  to  the  computer,  you  can  monitor  the  equipment 
simply such as the projector, the projection monitor and the flat display monitor connect-
ed to the network.
*  
The PJ Network Manager can handle our products which has a SNMP agent function. 
SNMP...


Operating Environment
Limited condition
The number of agents monitored is up to 200.
Chapter 1 Introducing
Expression/Abbreviation
The  OS  of  the  computer  and  the  Web  browser  described  in  this  manual  is  Windows  XP 
Professional and Internet Explorer 6.0. In case of another OS or Web browser, some instruc-
tion  procedures  may  differ  from  the  actual  operation  depending  on  your  computer  envi-
ronment.
Use of this manual
This manual does not provide the description of basic...

PJ NETWORK MANAGEROWNER'S MANUAL
Chapter 2 
 Set up
2 



Chapter 2 Set up
PJ Network Manager installation
1  
S et  th e  sup p li e d  CD - R O M  into  th e  CD - R O M 
drive of your computer. Double click SetupTool.
exe  icon  in  the  "PJ  Network  Manager"  folder  in 
the CD-ROM.
2  Select  "[English  [United  States]"  from  the  pull-
down menu on the "Choose Setup Language" 
window and click OK button to start installing 
and then follow the installation wizards.
As  the  "S of t ware  License  Agreement"  will...

PJ NETWORK MANAGEROWNER'S MANUAL
Chapter 3 
 Basic Operation
3 



Chapter 3 Basic Operation

Launching and quitting PJ Network Manager
To launch PJ Network Manager, take one of the following.
- Select "PJ Network Manager" from the menu "Start" - "All programs".
- Double click a management file*1.
Tool barMenu
Status list
Status barPolling times indication
Event indication
Items Description
Menu .....................................Executes a command with menu selectionTool bar  ...............................Executes a command assigned...

PJ NETWORK MANAGEROWNER'S MANUAL

Quitting PJ Network Manager
To  quit  the  PJ  Network  Manager,  click  the  close  box  on  top  right  of  the  status  window,  or 
select "Exit" from the "File" menu
[Note]
* The PJ Network Manager cannot open multiple status windows at the same time.
Menu tree
Menu Sub menu  Operation
File  New  Creates a new management file.
  Open  Opens an existing management file.
  Save  Saves the active management file.
  Save As  Saves the active...

10

Chapter 3 Basic Operation

Name of the button on the tool bar
The following commands are assigned to the buttons on the tool bar.
Button Operation
New ..................................................Creates a new management file.
Open  ...............................................Opens an existing management file. 
Save  .................................................Saves the active management file.
Target monitoring  .................Starts or stops target monitoring.
Target display...