Eiki Projector Lc Sxg400 User Manual

51
This function prevents an unauthorized person from 
changing the screen logo.
 Off  ...........  The screen logo can be changed freely from 
the Logo Menu (p.54).
  On  ............  The screen logo cannot be changed without 
a Logo PIN code.
If you want to change the Logo PIN code lock setting, 
press the SELECT button and the Logo PIN code dialog 
box appears. Enter a Logo PIN code by following the 
steps below. The initial Logo PIN code is set to “4321” at 
the factory.
Logo PIN code lock
Enter a...

52
Remote controlRemote control
The eight different remote control codes (Code 1–Code 8) 
are assigned to the projector; the factory-set, initial code 
(Code 1) and the other seven codes (Code 2 to Code 8). 
The same code should set on both the projector and the 
remote control. For example, operating the projector in 
“Code 7”, the remote control code also must be switched to 
“Code 7”.
 To change the code for the projector
  Select a remote control code in this Setting Menu.
  To change the code for...

53
Power management
Time left before the lamp is off.
Press the SELECT button at 
Power management and this 
dialog box appears. Use the 
Point 
7 8 buttons to choose 
one of the three options. 
Press the Point 
d button to 
select the timer, and then use 
the Point 
7 8 buttons to set 
timer.
Power management
For reducing power consumption as well as maintaining 
the lamp life, the Power management function turns off the 
projection lamp when the projector is not used for a certain 
period.
If the input...

54
Fan control
This function is used to set the cooling fans’ operation to the 
projector’s setting environment. Set this function properly in 
accordance with the projector’s installation method. Other wise, 
the cooling fans will not work properly and that causes 
malfunctions of the projector and decreases the lamp life.
Slant
Select the projector’s installation condition from the following 
options:
 Off  ...........  When using the projector within the range of the 
upward/ downward inclination of...

55
Change the PIN code lock setting
Use the Point 7 8 buttons to 
switch between the options.
Use the Point 7 8 button to select Off, On1, or On2 and 
then move the pointer to “Quit” with the Point 
d button. 
Press the SELECT button to close the dialog box.
Change the PIN code lock setting Enter a PIN code
PIN code lock
This function prevents the projector from being operated 
by unauthorized persons and provides the following 
setting options for security.
  Off  ...........  Unlocked.
  On1...

56
The PIN code can be changed to your desired four-digit 
number. Press the Point 
d buttons to select “PIN code 
change” and press the SELECT button. The New PIN code 
input dialog box appears. Set a new PIN code.
Change the PIN code Change the PIN code
CAUTION:
WHEN y OU HAVE CHANGED THE PIN 
CODE,  WRITE DOWN  THE NEW PIN 
CODE IN COLUMN OF  THE PIN CODE 
NO .  MEMO ON PAGE 76,  AND KEEP IT 
SECUREL y . IF y OU FORGET y OUR PIN 
CODE,  THE PROJECTOR  CAN NO LONGER 
BE STARTED .
Test pattern
Various...

57
Factory default
This function returns all setting values except for the user 
logo, PIN code lock, Logo PIN code lock, lamp counter, and 
filter counter to the factory default settings.
Exit the Setting Menu.
Quit
Select Factory default and this 
box appears. Select [Yes], and 
the next box appears. Select [Yes] to 
activate it.
Factory default
This function is used to set a frequency for the filter cleaning.
When the projector reached a specified time between 
cleanings, a Filter warning icon...

58
Turn off the projector, and unplug the AC power cord 
from the AC outlet.
First, clean up the dust on the projector and around the 
air vents.
1
2
Filter prevents dust from accumulating on the optical elements inside the projector\
. Should the filter becomes 
clogged with dust particles, it will reduce cooling fans’ effectiveness and may result in internal heat buildup and 
adversely affect the life of the projector. If a “Filter warning” icon (yellow or red) appears on the screen and the 
WARNING...

59
When the projection lamp of the projector reaches its end 
of life, the Lamp replacement icon appears on the screen 
and LAMP REPLACE indicator lights yellow. Replace the 
lamp with a new one promptly. The timing when the LAMP 
REPLACE indicator should light is depending on the lamp 
mode.
Follow these steps to replace the lamp.
ORDER REPLACEMENT LAMP
Replacement lamp can be ordered through your dealer. When ordering, give the following information to the dealer.
	●	Model No . of your projector  :...

60
Be sure to reset the Lamp counter after the lamp is replaced. When the Lamp counter is reset, the LAMP 
REPLACE indicator stops lighting and the Lamp replacement icon disappears.
Press the MENU button to display the On-Screen 
Menu. Use the Point 
7 8 buttons to move the red 
frame pointer to the Setting Menu icon.
Use the Point ed buttons to move the red frame 
pointer to Lamp counter and then press the SELECT 
button. A dialog box appears showing the total 
accumulated time of the lamp usage and the...