Eiki Projector Lc Sd10 User Manual
Here you can view all the pages of manual Eiki Projector Lc Sd10 User Manual. The Eiki manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 31
31 Video input Input Source Selection ( Component, RGB Scart 21-pin ) Menu Operation Direct Operation Choose Computer by pressing INPUT button on the top control or COMPUTER button on the remote control. Before using these buttons, correct input source should be selected through menu operation as described below. Press MENU button to display the On-Screen Menu. Press Point 7 8button to move the red frame pointer to INPUT Menu icon. Press Point dbutton to move the red arrow pointer to Computer and then...
Page 32
32 Video Input AV SYSTEM MENU (VIDEO OR S-VIDEO) AV SYSTEM MENU (COMPONENT VIDEO) Video System Selection Press MENU button to display the On-Screen Menu. Press Point 7 8buttons to move the red frame pointer to AV System Menu icon. Press Point dbutton to move the red arrow pointer to the system that you want to select and then press SELECT button. 1 2 If projector cannot reproduce proper video image, it is necessary to select a specific broadcast signal format among PAL, SECAM, NTSC, NTSC 4.43, PAL-M,...
Page 33
33 Video Input Menu Operation Press MENU button to display the On-Screen Menu. Press Point 7 8button to move the red frame pointer to Image Select Menu icon.1 2Press Point d dbutton to move the red frame pointer to the level that you want to set and then press SELECT button. Move the red frame pointer to the level and press SELECT button. The level being selected. IMAGE SELECT MENU Normal picture adjustment preset on this projector.Standard Picture level adjusted for the picture with fine tone.Cinema...
Page 34
34 Video Input Press Point 7 8buttons to adjust value. Press MENU button to display the On-Screen Menu. Press Point 7 8buttons to move the red frame pointer to IMAGE ADJUST Menu icon.1 2Press Point dbutton to move the red frame pointer to the item that you want to adjust and then press SELECT button. The level of each item is displayed. Adjust each level by pressing Point 7 8buttons. Move the red frame point- er to the item to be select- ed and then press SELECT button. IMAGE ADJUST MENU Image...
Page 35
35 Video Input Screen Size Adjustment This projector has a picture screen resize function, which enables you to display the desirable image size. Press MENU button to display the On-Screen Menu. Press Point 7 8buttons to move the red frame pointer to Screen Menu icon. Press Point dbutton and move the red frame pointer to the function that you want to select and then press SELECT button. 1 2 Note: The Screen Menu cannot be operated when “720p,” “1035i,” or “1080i” is selected on the AV System Menu( ☞...
Page 36
36 Keystone This function corrects the distorted image. Select either of Store or Reset and press SELECT button. The keystone dialog box will appear. ( ☞P20 ) StoreStore the keystone adjustment data even if the AC power cord is disconnected. ResetReset the keystone adjustment data when the AC power cord is disconnected from the AC outlet. Setting Menu Press MENU button to display the On-Screen Menu. Press Point 7 8buttons to move the red-frame pointer to SETTING icon.1 2 Language Language used in...
Page 37
37 Setting For reducing power consumption as well as maintaining the lamp life, the Power Management function turns off the projection lamp when the input signal is interrupted and no button is pressed for 30 seconds or more. If the input signal is interrupted and no button is pressed for 30 seconds or more, the timer display with the message No signal appears on the screen. The count-down of the set time will get started. The count-down time can be set between 1 and 30 minutes. When the count-down...
Page 38
38 Setting Remote control This projector has two different remote control codes; the factory- set normal code (Code 1) and the secondary code (Code 2). This switching function prevents remote control interference when operating several projectors or video equipment at the same time. When operating the projector in “Code 2,” both the projector and remote control must be switched to “Code 2.” To change the code of the projector : Set the remote control in the SETTING MENU to “Code 2.” To change the...
Page 39
39 P- TIMERNO SHOWFREEZE VIDEO COMPUTEROMPUTER L-CLICKR-CLICK PAGE qPAGE▲▼buttons Scroll back and forth pages on the screen when giving presentations. Installation Connect the Projector and your computer with the VGA cable. q r w y t u i o e For computer Aim the remote control at the Presentation Remote receiver. wCursor button Scroll back and forth pages on the screen when giving a presentation. eR-CLICK button Acts as the right button on a computer mouse. rL-CLICK button Acts as the left button on...
Page 40
40 Lamp Replace When the life of the projection lamp draws to an end, LAMP REPLACE indicator lights yellow. If this indicator lights yellow, replace the projection lamp with a new one promptly. ORDER REPLACEMENT LAMP Replacement Lamp can be ordered through your dealer. When ordering a projection lamp, give the following information to the dealer. •Model No. of your projector : LC-SD10 •Replacement Lamp Type No. : POA-LMP57 (Service Parts No. 610 308 3117) For continued safety, replace with a lamp...