Eiki Projector Lc Sb22 User Manual

							MULTIMEDIA PROJECTOR
OWNER’S MANUAL
MODEL   LC-SB22 
						

							2
Features and Design
◆Compact Design
This projector is designed compact in size and
weight.  It is easy to carry and work anywhere you
wish to use.
◆Compatibility
The projector widely accepts various video and
computer input signals including; Computers, 6 Color
systems (PAL, SECAM, NTSC, NTSC4.43, PAL-M,
PAL-N), Component video, S-Video and RGB scart.
◆Simple Computer System Setting
The projector has the Multi-scan system to conform
to almost all computer output signals quickly.  (p26)
◆Quick Termination
The AC cord can be plugged out right after turning off
the projector.  (p19)
◆Digital Zoom (for Computer)
The digital zoom function expands (to approx. 16
times of screen size) or compresses (to approx. half
of the screen size) the image size, allowing you to
focus on crucial information during a presentation.
(p33)
◆Noise reduction function
The Noise reduction function helps you to reduce the
contained noise on the screen to get smoother
images.  (p39)
◆Blackboard Function
Blackboard✳can be used as a projection screen.
✳The board color is limited to Green.  (p30, 37)
◆Multilanguage Menu Display
Operation menu is available in 16 languages; English,
German, French, Italian, Spanish, Portuguese, Dutch,
Swedish, Finnish, Polish, Hungarian, Romanian,
Russian, Chinese, Korean, or Japanese.  (p41)
◆Logo Function
The Logo function allows you to customize the
screen logo with the Logo functions. (p42, 43)  You
can capture an image for the screen logo, choose a
logo between provided and captured. 
◆Switchable Interface Terminal
The projector provides a switchable interface
terminal.  You can use the terminal as computer input
or monitor output conveniently.  (p44)
◆Power Management
The Power management function reduces power
consumption and maintains the lamp life.  (p44)
◆Lamp Control
Brightness of the projection lamp can be selected.
(p45)
◆Security Function
The Security function helps you to ensure the
security with the Key lock (p46) and the PIN code
lock (p18, 46, 47) functions.  You can lock the
operation on the projector and the remote control.
Also you can prevent unauthorized persons from
using the projector.
This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of use.
This projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display
(LCD) technology.
✔Note:
• 
The On-Screen Menu and figures in this manual may differ slightly from the product.  
• The contents of this manual are subject to change without notice. 
						

							3
Table of Contents
Trademarks
Each name of corporations or products in this book is either a registered trademark or a trademark of its respective
corporation.
Features and Design  . . . . . . . . . . . . . . . . . . .2
Table of Contents  . . . . . . . . . . . . . . . . . . . . . .3
To the Owner  . . . . . . . . . . . . . . . . . . . . . . . . .4
Safety Instructions  . . . . . . . . . . . . . . . . . . . .5
Air Circulation 6
Installing the Projector in Proper Position   6
Moving the Projector 6
Compliance  . . . . . . . . . . . . . . . . . . . . . . . . . .7
Part Names and Functions  . . . . . . . . . . . . . .8
Front 8
Back 8
Bottom 8
Rear Terminal 9
Top Control 10
Remote Control 11
Remote Control Battery Installation 12
Operating Range 12
Installation  . . . . . . . . . . . . . . . . . . . . . . . . . .13
Positioning the Projector 13
Adjustable Feet 13
Connecting the AC Power Cord 14
Connecting to a Computer 15
Connecting to Video Equipment 16
Connecting to Component Video Equipment 17
Basic Operation  . . . . . . . . . . . . . . . . . . . . . .18
Turning On the Projector 18
Turning Off the Projector 19
How to Operate the On-Screen Menu 20
Menu Bar 21
Zoom and Focus Adjustment 22
Keystone Correction 22
Sound Adjustment 23
Remote Control Operation 23
Computer Input   . . . . . . . . . . . . . . . . . . . . .25
Input Source Selection 25
Computer System Selection 26
Auto PC Adjustment 27
Manual PC Adjustment 28
Image Level Selection  30
Image Level Adjustment 31
Screen Size Adjustment 32
Video Input . . . . . . . . . . . . . . . . . . . . . . . . . .34
Input Source Selection (Video, S-Video) 34
Input Source Selection
(Component, RGB Scart 21-pin) 35
Video System Selection 36
Image Level Selection  37
Image Level Adjustment 38
Screen Size Adjustment 40
Setting  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Setting 41
Maintenance and Cleaning  . . . . . . . . . . . . .49
Warning Indicator 49
Cleaning the Air Filters 50
Attaching the Lens Cover 50
Cleaning the Projection Lens 51
Cleaning the Projector Cabinet 51
Lamp Replacement 52
Lamp Replacement Counter 53
Appendix  . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Troubleshooting 54
Menu Tree 56
Indicators and Projector Condition 58
Compatible Computer Specifications 59
Technical Specifications 60
Optional Parts 61
Configurations of Terminals 62
PIN Code Number Memo 63 
						

							4
To the Owner
CAUTION : T O  REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK).  NO USER-SERVICEABLE PARTS
INSIDE EXCEPT LAMP REPLACEMENT.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
THIS SYMBOL INDICATES THAT DANGEROUS
VOLTAGE CONSTITUTING A RISK OF ELECTRIC
SHOCK IS PRESENT WITHIN THIS UNIT.
THIS SYMBOL INDICATES THAT THERE ARE
IMPORTANT OPERATING AND MAINTENANCE
INSTRUCTIONS IN THE OWNERS MANUAL WITH
THIS UNIT.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Before operating this projector, read this manual thoroughly 
and operate the projector properly.  
This projector provides many convenient features and 
functions.  Operating the projector properly enables you to 
manage those features and maintains it in better condition for
a considerable time.
Improper operation may result in not only shortening the 
product-life, but also malfunctions, fire hazard, or other 
accidents.
If your projector seems to operate improperly, read this 
manual again, check operations and cable connections and try 
the solutions in the “Troubleshooting” section in the end of 
this booklet.  If the problem still persists, contact the dealer 
where you purchased the projector or the service center.Safety Precaution
WARNING :  TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE.
–This projector produces intense light from the projection
lens.  Do not stare directly into the lens as much as
possible.  Eye damage could result.  Be especially careful
that children do not stare directly into the beam.
–Install the projector in a proper position.  If not, it may
result in a fire hazard.
–Provide appropriate space on the top, sides and rear of the
projector cabinet for allowing air circulation and cooling the
projector.  Minimum clearance must be maintained.  If the
projector is to be built into a compartment or similarly
enclosed, the minimum distances must be maintained.  Do
not cover the ventilation slot on the projector.  Heat build-
up can reduce the service life of your projector, and can
also be dangerous.
–If the projector is not to be used for an extended time,
unplug the projector from the power outlet.
0.7(20cm)
1.5(50cm)3(1m)
1.5(50cm)
SIDE and TOPREAR
CAUTION
Not for use in a computer room as defined in the Standard for 
the Protection of Electronic Computer/Data Processing 
Equipment, ANSI/NFPA 75.
Ne peut être utilisé dans une salle d’ordinateurs telle que 
définie dans la norme ANSI/NFPA 75 Standard for Protection 
of Electronic Computer/Data Processing Equipment 
NOTE:This symbol mark and recycle system are applied only 
to EU countries and not applied to the countries in the 
other area of the world.
Your EIKI product is designed and
manufactured with high quality
materials and components which can be
recycled and reused.
This symbol means that electrical and
electronic equipment, at their end-of-
life, should be disposed of separately
from your household waste.
Please dispose of this equipment at your local community
waste collection/recycling centre.
In the European Union there are separate collection
systems for used electrical and electronic products.
Please help us to conserve the environment we live in! 
CAUTION ON HANGING FROM THE CEILING
When hanging the projector from the
ceiling, clean air intake vents, air fil-
ters, or top of the projector periodical-
ly with a vacuum cleaner.  If you leave
the projector without cleaning for a
long time, the dust will block the oper-
ation of the cooling function, and it
may cause a breakdown or a disaster.
DO NOT SET THE PROJECTOR IN GREASY, WET, OR
SMOKY CONDITIONS SUCH AS IN A KITCHEN TO PRE-
VENT A BREAKDOWN OR A DISASTER.  IF THE
PROJECTOR COMES IN CONTACT WITH OIL OR CHEMI-
CALS, IT MAY BECOME DETERIORATED.
READ AND KEEP THIS OWNERS MANUAL FOR LATER
USE. 
						

							5
Safety Instructions
All the safety and operating instructions should be read before
the product is operated.
Read all of the instructions given here and retain them for later
use.  Unplug this projector from AC power supply before
cleaning.  Do not use liquid or aerosol cleaners.  Use a damp
cloth for cleaning.
Follow all warnings and instructions marked on the projector.
For added protection to the projector during a lightning storm,
or when it is left unattended and unused for long periods of
time, unplug it from the wall outlet.  This will prevent damage
due to lightning and power line surges.
Do not expose this unit to rain or use near water... for
example, in a wet basement, near a swimming pool, etc...
Do not use attachments not recommended by the
manufacturer as they may cause hazards.
Do not place this projector on an unstable cart, stand, or table.
The projector may fall, causing serious injury to a child or
adult, and serious damage to the projector.  Use only with a
cart or stand recommended by the manufacturer, or sold with
the projector.  Wall or shelf mounting should follow the
manufacturers instructions, and should use a mounting kit
approved by the manufacturers.
An appliance and cart combination should
be moved with care.  Quick stops,
excessive force, and uneven surfaces
may cause the appliance and cart
combination to overturn.
Slots and openings in the back and bottom of the cabinet are
provided for ventilation, to ensure reliable operation of the
equipment and to protect it from overheating.
The openings should never be covered with cloth or other
materials, and the bottom opening should not be blocked by
placing the projector on a bed, sofa, rug, or other similar
surface.  This projector should never be placed near or over a
radiator or heat register.
This projector should not be placed in a built-in installation
such as a book case unless proper ventilation is provided.
Never push objects of any kind into this projector through
cabinet slots as they may touch dangerous voltage points or
short out parts that could result in a fire or electric shock.
Never spill liquid of any kind on the projector.
Do not install the projector near the ventilation duct of air-
conditioning equipment.This projector should be operated only from the type of power
source indicated on the marking label.  If you are not sure of
the type of power supplied, consult your authorized dealer or
local power company.
Do not overload wall outlets and extension cords as this can
result in fire or electric shock.  Do not allow anything to rest
on the power cord.  Do not locate this projector where the
cord may be damaged by persons walking on it.
Do not attempt to service this projector yourself as opening or
removing covers may expose you to dangerous voltage or
other hazards.  Refer all servicing to qualified service
personnel.
Unplug this projector from wall outlet and refer servicing to
qualified service personnel under the following conditions:
a. When the power cord or plug is damaged or frayed.
b. If liquid has been spilled into the projector.
c. If the projector has been exposed to rain or water.
d. If the projector does not operate normally by following the
operating instructions.  Adjust only those controls that are
covered by the operating instructions as improper
adjustment of other controls may result in damage and will
often require extensive work by a qualified technician to
restore the projector to normal operation.
e. If the projector has been dropped or the cabinet has been
damaged.
f.When the projector exhibits a distinct change in
performance-this indicates a need for service.
When replacement parts are required, be sure the service
technician has used replacement parts specified by the
manufacturer that have the same characteristics as the
original part.  Unauthorized substitutions may result in fire,
electric shock, or injury to persons.
Upon completion of any service or repairs to this projector,
ask the service technician to perform routine safety checks to
determine that the projector is in safe operating condition.
Voor de klanten in Nederland
Bij dit produkt zijn batterijen
geleverd.  
Wanneer deze leeg zijn, moet u
ze niet weggooien maar inleveren
als KCA.
NL 
						

							6
Safety Instructions
USE CAUTION IN CARRYING OR 
TRANSPORTING THE PROJECTOR
–Do not drop or bump the projector, otherwise damages
or malfunctions may result.
–When carrying the projector, use a suitable carrying
case.
–Do not transport the projector by using a courier or
transport service in an unsuitable transport case.  This
may cause damage to the projector.  To transport the
projector through a courier or transport service, consult
your dealer for their information.
–
Do not put the projector in a case before the projector
is cooled enough.
Moving the Projector
When moving the projector, replace the lens cover and
retract the adjustable feet to prevent damage to the
lens and cabinet.  When the projector is not in use for
an extended period, put it into a suitable case to protect
the projector.  
When handling the projector, do not drop, bump,
subject it to strong forces or put other things on the
cabinet.  
Do not tilt the projector more than
20 degrees from side to side. 
Do not point the projector up to
project an image. 
Do not point the projector down
to project an image. 
Do not put the projector on either
side to project an image. 
Install the projector properly. Improper Installation may
reduce the lamp life and cause a fire hazard.
Installing the Projector 
in Proper Position
Openings in the cabinet are provided for ventilation and
to ensure reliable operation of the product and to
protect it from overheating, and these openings must
not be blocked or covered. 
CAUTION
Hot air is exhausted from the exhaust vent.  When
using or installing the projector, the following
precautions should be taken. 
–Do not put any flammable object or spray can near 
the projector, hot air is exhausted from the ventilation 
holes.
–  Keep the exhaust vent at least 3’(1m) away from any
objects.
– Do not touch a peripheral part of the exhaust vent,
especially screws and metallic part.  This area will
become hot while the projector is being used.
– Do not put anything on the cabinet.  The materials
put on the cabinet will not only get damaged but also
cause fire hazard by heat.
Cooling fans are provided to cool down the projector.
The fans running speed is changed according to the
temperature inside the projector.
Air Circulation
20˚
20˚
Air Intake
Vent
Exhaust Vent
(Hot air exhaust)
Exhaust Vent
Exhaust Vent
(Hot air exhaust)Air Intake
Vent 
						

							7
Compliance
The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it.  
AC Power Cord for the United States and Canada :
AC Power Cord used in the United States and Canada is listed by the Underwriters Laboratories (UL) and
certified by the Canadian Standard Association (CSA).
AC Power Cord has a grounding-type AC line plug.  This is a safety feature to be sure that the plug will fit into
the power outlet.  Do not try to defeat this safety feature.  Should you be unable to insert the plug into the
outlet, contact your electrician.
GROUND
THE SOCKET-OUTLET SHOULD BE INSTALLED NEAR THE EQUIPMENT AND EASILY ACCESSIBLE.
AC Power Cord Requirement
Federal Communication Commission Notice
Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules.  These limits are designed to provide reasonable protection against harmful interference in a
residential installation.  This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications.  However, there is
no guarantee that interference will not occur in a particular installation.  If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures :
–Reorient or relocate the receiving  antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.
Use of shielded cable is required to comply with class B limits in Subpart B of Part 15 of FCC Rules.
Do not make any changes or modifications to the equipment unless otherwise specified in the instructions.  If such
changes or modifications should be made, you could be required to stop operation of the equipment.
Model Number  : LC-SB22
Trade Name  : EIKI
Responsible party  : EIKI International, Inc.
Address  : 30251 Esperanza Rancho Santa Margarita CA 92688-2132
Telephone No.  : 800-242-3454 (949-457-0200) 
						

							8
Bottom
qInfrared Remote Receiver
wZoom Ring
eProjection Lens
rFocus Ring
tLens Cover
(See page 50 for attaching.)
yTop Controls and Indicators
uSpeaker
iAir Intake Vent
oPower Cord Connector
!0Terminals and Connectors
!1Lamp Cover
!2Air Intake Vents (back and bottom)
!3Air Filters 
!4Adjustable Feet
!5
 Exhaust Vents
!4
!1!3!2
CAUTION
Hot air is exhausted from the exhaust
vent.  Do not put heat-sensitive objects
near this side.
Part Names and Functions
!5
Back!5yo!0
qwert!5
Front
iu 
						

							9
Part Names and Functions
RESET buttonA built-in micro processor which controls this unit may
occasionally malfunction and need to be reset. This can be
done by pressing the RESET button with a pen, which will shut
down and restart the unit.  Do not use the RESET function
excessively.
Rear Terminal
S-VIDEO IN  
MONITOR  OUTCOMPUTER IN 2 / 
COMPUTER / COMPONENT
AUDIO  IN
R
VIDEO INL(MONO)
(VARIABLE)
AUDIO  OUT
COMPUTER  IN  1/ COMPONENT INUSBSERVICE PORT RESET
qwerty
i
u
t S-VIDEO IN
Connect the S-VIDEO output from video
equipment to this jack.  (p16)
y AUDIO IN
Connect the audio output from video equipment
connected to tor oto this jack. (When the audio
output is monaural, connect it to L (MONO) jack.)
(p16)
i COMPUTER/ COMPONENT AUDIO IN 
Connect the audio output (stereo) from a computer
or video equipment connected to eor rto this 
jack.  (p 15, 17)
o VIDEO IN
Connect the composite video output from video
equipment to VIDEO jack.  (p16)
r COMPUTER IN 2 / MONITOR OUT
This terminal is switchable and can be used for
input from a computer and video equipment
(component or RGB scart 21-pin) or output to the
other monitor.  
Set the terminal up as either Computer input or
Monitor output properly.  (Used for Monitor out,
this terminal outputs only incoming signal from
COMPUTER IN 1 / COMPONENT IN terminal.)
(p15, 17, 44)
u AUDIO OUT(VARIABLE)
Connect an external audio amplifier to this jack.
(p15- 17)
This terminal outputs sound from AUDIO IN
terminal  (yor i).
q USB (Series B)
In order to operate the computer with the remote
control during a presentation, connect the USB
port of the computer to the projector with a USB
cable.  (p11, 15)
w SERVICE PORT
This jack is used to service the projector. 
✽
✽
e COMPUTER IN 1 / COMPONENT IN 
Connect output signal from a computer, RGB scart
21-pin video output, or component video output to
this terminal.  (p15, 17)
When the cable is of the longer variety, it is
advisable to use this terminal and not COMPUTER
IN 2 / MONITOR OUT.
o
Part Names and Functions 
						

							10
Part Names and Functions
ON - OFF
POWER
KEYSTONE
INPUT
WARNINGLAMP REPLACE
MENU
- VOLUME+ VOLUME
SELECT
qwetui
o
u LAMP REPLACE indicator
Turn yellow when the life of the projection lamp
draws to an end.  (p52, 58)
y WARNING indicator
Emit a red light when the projector detects 
abnormal condition.  This also blinks red when the
internal temperature of the projector exceeds the
operating range.  (p49, 58)
w POWER ON–OFF button
Turn the projector on or off.  (p18, 19)
r POWER indicator
Emit a red light until the projector gets ready to be
turned on.  It turns red when the projector is in the
stand-by mode.  It remains green while the
projector is under operation.  (p18, 19, 58)
t INPUT button
Select input source.  (p25, 34, 35)
e MENU button
Open or close the On-Screen Menu.  (p20)
o POINT (ed7 8 ) buttons
– Select an item or adjust the value in the On-   
Screen Menu.  (p20)
– Pan the image in Digital zoom + mode.  (p33)
– Adjust the volume level. (Point 7 8buttons)     
(p23)
q SELECT button
– Execute the selected item. (p20)
– Expand or compress the image in Digital zoom 
mode.  (p33)
i KEYSTONE button 
Correct the keystone distortion.  (p22, 41)
Top Control
ry