Eiki Projector Lc Sb22 User Manual

MULTIMEDIA PROJECTOR
OWNER’S MANUAL
MODEL   LC-SB22 

2
Features and Design
◆Compact Design
This projector is designed compact in size and
weight.  It is easy to carry and work anywhere you
wish to use.
◆Compatibility
The projector widely accepts various video and
computer input signals including; Computers, 6 Color
systems (PAL, SECAM, NTSC, NTSC4.43, PAL-M,
PAL-N), Component video, S-Video and RGB scart.
◆Simple Computer System Setting
The projector has the Multi-scan system to conform
to almost all computer output signals quickly.  (p26)
◆Quick...

3
Table of Contents
Trademarks
Each name of corporations or products in this book is either a registered trademark or a trademark of its respective
corporation.
Features and Design  . . . . . . . . . . . . . . . . . . .2
Table of Contents  . . . . . . . . . . . . . . . . . . . . . .3
To the Owner  . . . . . . . . . . . . . . . . . . . . . . . . .4
Safety Instructions  . . . . . . . . . . . . . . . . . . . .5
Air Circulation 6
Installing the Projector in Proper Position   6
Moving the Projector 6...

4
To the Owner
CAUTION : T O  REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK).  NO USER-SERVICEABLE PARTS
INSIDE EXCEPT LAMP REPLACEMENT.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
THIS SYMBOL INDICATES THAT DANGEROUS
VOLTAGE CONSTITUTING A RISK OF ELECTRIC
SHOCK IS PRESENT WITHIN THIS UNIT.
THIS SYMBOL INDICATES THAT THERE ARE
IMPORTANT OPERATING AND MAINTENANCE
INSTRUCTIONS IN THE OWNERS MANUAL WITH
THIS UNIT.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Before operating this...

5
Safety Instructions
All the safety and operating instructions should be read before
the product is operated.
Read all of the instructions given here and retain them for later
use.  Unplug this projector from AC power supply before
cleaning.  Do not use liquid or aerosol cleaners.  Use a damp
cloth for cleaning.
Follow all warnings and instructions marked on the projector.
For added protection to the projector during a lightning storm,
or when it is left unattended and unused for long periods of
time,...

6
Safety Instructions
USE CAUTION IN CARRYING OR 
TRANSPORTING THE PROJECTOR
–Do not drop or bump the projector, otherwise damages
or malfunctions may result.
–When carrying the projector, use a suitable carrying
case.
–Do not transport the projector by using a courier or
transport service in an unsuitable transport case.  This
may cause damage to the projector.  To transport the
projector through a courier or transport service, consult
your dealer for their information.
–
Do not put the projector in a...

7
Compliance
The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it.  
AC Power Cord for the United States and Canada :
AC Power Cord used in the United States and Canada is listed by the Underwriters Laboratories (UL) and
certified by the Canadian Standard Association (CSA).
AC Power Cord has a grounding-type AC line plug.  This is a safety feature to be sure that the plug will fit into
the power outlet.  Do not try to defeat this safety feature....

8
Bottom
qInfrared Remote Receiver
wZoom Ring
eProjection Lens
rFocus Ring
tLens Cover
(See page 50 for attaching.)
yTop Controls and Indicators
uSpeaker
iAir Intake Vent
oPower Cord Connector
!0Terminals and Connectors
!1Lamp Cover
!2Air Intake Vents (back and bottom)
!3Air Filters 
!4Adjustable Feet
!5
 Exhaust Vents
!4
!1!3!2
CAUTION
Hot air is exhausted from the exhaust
vent.  Do not put heat-sensitive objects
near this side.
Part Names and Functions
!5
Back!5yo!0
qwert!5
Front
iu 

9
Part Names and Functions
RESET buttonA built-in micro processor which controls this unit may
occasionally malfunction and need to be reset. This can be
done by pressing the RESET button with a pen, which will shut
down and restart the unit.  Do not use the RESET function
excessively.
Rear Terminal
S-VIDEO IN  
MONITOR  OUTCOMPUTER IN 2 / 
COMPUTER / COMPONENT
AUDIO  IN
R
VIDEO INL(MONO)
(VARIABLE)
AUDIO  OUT
COMPUTER  IN  1/ COMPONENT INUSBSERVICE PORT RESET
qwerty
i
u
t S-VIDEO IN
Connect the S-VIDEO...

10
Part Names and Functions
ON - OFF
POWER
KEYSTONE
INPUT
WARNINGLAMP REPLACE
MENU
- VOLUME+ VOLUME
SELECT
qwetui
o
u LAMP REPLACE indicator
Turn yellow when the life of the projection lamp
draws to an end.  (p52, 58)
y WARNING indicator
Emit a red light when the projector detects 
abnormal condition.  This also blinks red when the
internal temperature of the projector exceeds the
operating range.  (p49, 58)
w POWER ON–OFF button
Turn the projector on or off.  (p18, 19)
r POWER indicator
Emit a red light...