Eiki Projector Lc Hdt1000 User Manual

							
91

Appendix
Technical Specifications
Mechanical Information 
 Projector Type  Multi-media Projector 
  Dimensions (W x H x D)  21.20” (W) x 10.55” (H) x 29.8” (D) (538.5 mm x 268.0 mm x 757.0 mm) 
 
  Net Weight  60.85lbs (27.6 kg)
 
  Feet Adjustment  0˚ to 2.8˚           
              
Panel Resolution 
 LCD Panel System  1.64” TFT Active Matrix type, 3 panels  
  Panel Resolution  2,048 x 1,080 dots
 
  Number of Pixels  6,635,520 (2,048 x 1,080 x 3 panels)           
             
Signal Compatibility 
 Color System PAL, SECAM, NTSC, NTSC4.43, PAL-M, and PAL-N 
  HDTV Compatible  720p, 1035i, 1080i, 1080p and 2K
  SDTV Compatible  480i, 480p, 575i and 575p
 
 Input Scanning Frequency  H-sync. 15 kHz–120 kHz, V-sync. 48 Hz–120 Hz         
 
Optical Information 
 Projection Lamp  380 W NSHA lamp x 2           
  
Interface
 Input 1  DVI-D Terminal (Digital), Mini D-Sub 15-pin Terminal (Analog), HDMI (v.1.3 with Deep Color) 
  Input 2  BNC Type x 5 (VIDEO/Y/G, B/Pb/Cb, R/Pr/Cr, H/HV and V), S-Video     
  Other Jacks   
Serial port in (D-sub 9), Serial port out (D-sub 9), USB port, LAN port (RJ-45), 
 
and Wired Remote Jack         
Power
 Voltage and Power Consumption  AC 100–120 V (11.2 A Max. Ampere), 50/60 Hz (The U.S.A and Canada) 
    AC 100-240 V (11.2 - 4.6 A Max. Ampere), 50/60 Hz (For other countries)     
Operating Environment
 Operating Temperature  41˚F–104˚F (5˚C–40˚C) 
  Storage Temperature  14˚F–140˚F (-10˚C–60˚C)
 
 
Remote Control 
  Battery  AAA or LR03 Type x 2           
  Operating Range  16.4’ (5 m/ ±30˚)
 
  Dimensions  19” (W) x 1.1” (H) x 5.7” (D) (48 mm x 27 mm x 145 mm)       
Net Weight  3.6 oz (102 g) (including batteries)
 
 
Accessories
 q Remote Control and Batteries q Spacer (For optional lens)
  q AC Power Cord 
q Strap (For lens mount cover) 
 q VGA Cable q Owner’s Manual (CD-ROM)
 q Real Color Manager Pro (CD-ROM)  q Quick Reference Guide
 q  PJ Network Manager (CD-ROM) q PIN Code Label
 q Mounting Clamp q Remote Control Cable
 q Cable ties 
 q Lens Attachments (1 type) (For optional lens) 
 q Light Block Plates (3 types) (For optional lens) 
 
 
  
 
  
						

							
9

Optional Parts
         Model No.
Optional Interface Board (Dual-SDI)     
: AH-72217
Optional Interface Board (Dual-Link SDI)     
: AH-72722
Optional Interface Board (DVI / D-sub 15)     
: AH-72223
Optional Interface Board (5-BNC / VIDEO)     
: AH-72225
The parts listed below are optionally available. When ordering those parts, specify the item name and Model No. 
to the sales dealer.
l  The specifications are subject to change without notice.
l  LCD panels are manufactured to the highest possible standards. Even though 99.99% of the pixels are effective, a tiny 
fraction of the pixels (0.01% or less) may be ineffective by the characteristics of the LCD panels.
l   Each projector has its own characteristics.
       
When projecting with several projectors on the same screen or side by side, you may recognize different white balance 
and color uniformity on each projector.
Appendix
This projector is compliant with PJLink Standard Class 1 of JBMIA (Japan Business Machine and Information 
System Industries Association). The projector supports all commands defined by PJLink Class 1 and is verified 
PJLink is a registered trademark of JBMIA and pending trademark in some \
countries.
Projector InputPJLink InputParameter
INPUT 1RGB (PC analog)RGB 111
RGB (Scart)RGB 212
RGB (PC Digital)DIGITAL 131
RGB (AV HDCP)DIGITAL 232
HDMIDIGITAL 333
INPUT 1AUX146
INPUT Video VIDEO 121
Y, Pb/Cb, Pr/CrVIDEO 222
RGBRGB 313
S-VideoVIDEO 525
INPUT 2AUX 247
INPUT INPUT 3AUX 348
INPUT 4INPUT 4AUX 449
PJ Link Notice 
						

							
9

Configurations of Terminals
ANALOG TERMINAL(Mini D-sub 15 pin)
512341096781514131112
CONTROL PORT CONNECTOR (D-sub 9 pin)
DIGITAL (DVI-D) TERMINAL (DVI 4 PIN)
1917
21018
31119
41220
51321
61422
71523
81624
USB PORT(Series B)
2
3 4
1
13579111315171918161412108642
HDMI TERMINAL(19 pin Type A)
8 7 6 5 4 3 2 1
LAN PORT (RJ-45)
1TX+
TX–
RX+
4- - -
5- - -
6RX–
7- - -
- - -
Serial
1- - -
RXD
TXD
4- - -
5SG
6- - -
7- - -
- - -
9- - -
1Vcc
– Data
+ Data
4Ground
1T.M.D.S. Data2–9T.M.D.S. Data1–17T.M.D.S. Data0–
T.M.D.S. Data2+10T.M.D.S. Data1+ 1T.M.D.S. Data0+
T.M.D.S. Data1Shield11T.M.D.S. Data1 Shield19T.M.D.S. Data0 Shield
4- - -
1- - -0- - -
5- - -1- - -1- - -
6DDC Clock14+5V PowerT.M.D.S. Clock Shield
7DDC Data15Ground (for +5V)T.M.D.S. Clock+
- - -16Hot Plug Detect 4T.M.D.S. Clock–
1T.M.D.S. Data 2+ Input11Ground (T.M.D.S. Clock)
Ground(T.M.D.S. Data 2) 1T.M.D.S. Clock– Input
T.M.D.S. Data 2– Input1- - -
4T.M.D.S. Data 1+ Input14- - -
5Ground (T.M.D.S. Data 1)15SCL
6T.M.D.S. Data 1– Input16SDA
7T.M.D.S. Data 0+ Input17Ground (DDC/CEC)
Ground (T.M.D.S. Data 0)1+5V Power
9T.M.D.S. Data 0– Input19Plug insert detection
10T.M.D.S. Clock+ Input
1Red Input9+5V Power
Green Input10Ground (Vert. sync)
Blue Input11Ground
4- - -
1DDC data
5Ground (Horiz. sync.) 1Horiz. sync.
6Ground (Red)14Vert. sync.
7Ground (Blue)15DDC Clock
Ground (Green)
Appendix 
						

							
94

Appendix
Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or 
lost the number and unable to operate the projector, contact the service center. 
Factory default set No:  1 2 3 4*
Factory default set No:  4 3 2 1*
*  S h o u l d   t h e   fo u r- d i g i t   n u m b e r   b e 
changed,  the  factory  set  number  will 
be invalid.
Put the label below (supplied) on in a prominent place of 
the projector’s body while it is locked with a PIN code.
While the projector is locked with the PIN code...
PIN Code Lock No.
Logo PIN Code Lock No.
PIN Code Number Memo
This  symbol  on  the  nameplate  means  the  product  is  Listed  by  Under writers 
Laboratories  Inc.  It  is  designed  and  manufactured  to  meet  rigid  U.L.  safety 
standards against risk of fire, casualty, and electrical hazards.
The CE Mark is a Directive conformity mark of the European Community (EC).
Licensed under USP5,717,422 USP6,816,141 
						

							
95

Dimensions
Appendix
Unit: inch (mm)
5.81(147.5)
20.87(530)21.20(538.5)
20.65(524.5)
108
G
8.66(220)8.46(215)
1.18(30)
7.28(185)
23.62(600)
200.0234.0
26.77(680)
3.03(77)
9.25(235)9.25(235)
29.80(757.0)
5.00(127)
9.63(244.5)10.55(268.0)
1.14(29)
9.82(249.5
)
10.43(265)
10.89(276.5)
4.74(120.5)
8.27(210)
6.89(175)
Screw Holes for Ceiling MountScrew: M8Depth: 0.393 (10.0) 
						

							
96

Appendix
On-BoardOptional Interface Board
Input1Input2Dsub-DVIComponent-S-videoSDIDualLinkSDI
Analog PCScartDigitalAnalog PC
ComponentVideo/S-VideoAnalog PCScartDigitalAnalog PC
ComponentVideo/S-videoDigitalDigital
On-BoardInput1
Analog PCo    o    o    o    o    o    o    o    o    o    o    o
Scarto    o    o    o        o        o        o    o       o        o        o    o
Digitalo    o    o    o    o    o    o   o       o    o    o    o   o
On-BoardInput2
Analog PCo    o    o    o    o    o    o    o    o    o    o
Componento    o    o    o    o    o    o    o    o    o    o
Video/S-Videoo    o        o    o       o        o    o       o        o       o    o
List of Picture in Picture
 o : Picture in Picture combinations are enabled
 - : Picture in Picture combinations are disabled
✔Note:
•  
As for Input 3 and Input 4, combination of digital signals for Main picture and Sub picture is not available.
•   
When the input signal(s) is/are incompatible, X mark will be displayed on the Main/Sub picture.
•   Depending on the frequency or signal type of PC/AV input, 
the display resolution may be lowered or images may not be 
displayed on the Main/Sub picture.
  
    •  Inputting PC analog signals: More than 165 MHz
  
    •  Inputting PC digital signals: More than 165MHz
Appendix 
						

							
97

Appendix
Serial Control Interface
This projector provides a function to control and monitor the projector's operations by using the RS-232C serial 
port.
Connect a RS-232C serial cross cable to SERIAL 
PORT IN on the projector and serial port on the PC
(See p.11).
Check the communication specifications shown 
right.
1
2
3
Baud rate : 9600 / 19200 bps
Parity check  : none
Stop bit   : 1
Flow control  : none
Data bit   : 8
Type a functional execution command and press the 
Enter key. 
Example
To select INPUT 2 port, type “C06” [CR]. 
✔Note:
• The default of the baud rate is set to 19200 bps. If an 
error occurs in the communication, change the serial 
port and the communication speed (baud rate).
•Enter with ASCII 64-byte capital characters and one-
byte characters.
The command is sent from PC to the projector with 
the format below;
      “C” [Command]  [CR]
        Command: two characters (refer to the 
command table below.
-The projector decodes the command and returns the 
“ACK” with the format below;
     [ACK] [CR]
-When the projector cannot decode the command, it 
returns with format below.
     “?” [CR] 
Format
Operation
Functional Execution Commands
CommandFunction
C00Turn the projector ON
C01Turn the projector OFF 
(immediately OFF)
C05Select Input 1
C06Select Input 2
C07Select Input 3
C08Select Input 4 
C0DVideo mute ON
C0EVideo mute OFF
C0FScreen Normal Size
C10Screen Full Size
C1CMenu ON
C1DMenu OFF
C3APointer RIGHT
CommandFunction
C3BPointer LEFT
C3CPointer UP
C3DPointer DOWN
C3FEnter
C46Zoom DOWN
C47Zoom UP
C4AFocus DOWN
C4BFocus UP
C5DLens shift UP
C5ELens shift DOWN
C5FLens shift LEFT
C60Lens shift RIGHT
C89Auto PC Adj.
C8EKeystone UP
C8FKeystone DOWN
C90Keystone RIGHT
C91Keystone LEFT 
						

							
9
Appendix
Status Read Commands
The command is sent from PC to the projector with 
the format below;
     “CR” [Command] [CR]
        Command: one character (refer to the command 
table below.)
The projector decodes the command and returns the 
'Character string' with the format below;
Format
CommandFunction Return 
valueProjector status
CR0Status Read
00Power On
80Stand-by mode
40Countdown
20Cooling down
10Power Malfunction
28Cooling down at the temperature anomaly
24Cooling down at Power Management mode
04Power Management mode after Cooling down
21Cooling down after the projector is turned off when the lamps 
are out.
81Stand-by mode after Cooling down when the lamps are out.
88Stand-by mode after Cooling down at the temperature 
anomaly.
2CCooling down when the projector is turned off by the shutter 
management function.
8CStand-by mode after Cooling down by the shutter 
management function. 
CR6Temperature Read%1 %2 
%1 = Temperature at Sensor 1 (˚C)
%2 = Temperature at Sensor 2 (˚C)
(ex.) %1 = 12.3 (˚C), %2 = 23.4 (˚C)
 --> The projector returns “ 12.3  23.4”.
    ( For each sensor, two digit and the tenth place numbers are 
displayed with a space between each temperature.)
?Communication failure
The tables on page 97 and 98 show the typical command lists for controlling the projector.  Please consult your 
local dealer for further information of other commands. 
						

							
KG2B
U.S.A.
EIKI International, Inc. 
30251 Esperanza 
Rancho Santa Margarita 
CA 92688-2132 
U.S.A.
Tel :   800-242-3454 (949)-457-0200 
Fax :   800-457-3454 (949)-457-7878 
E-Mail : [email protected] 
Deutschland & Österreich 
EIKI Deutschland GmbH 
Am Frauwald 12 
65510 Idstein 
Deutschland 
Tel :   06126-9371-0 
Fax :   06126-9371-14 
E-Mail : [email protected] 
China
EIKI (Shanghai) Co., Ltd. 
Lakeside Oasis Middle Ring Business Centre 
Block 10. #16-07, 
1628, Jin Sha Jiang Road, 
Shanghai, 200333. China 
Main Line :    86-21-3251-3993 
Service Hot Line :  86-21-3251-3995 
Fax :      86-21-3251-3997 
E-mail : [email protected] 
Canada
EIKI CANADA - Eiki International, Inc. 
P.O. Box 156, 310 First St. - Unit 2, 
Midland, ON, L4R 4K8, Canada 
Tel :   800-563-3454 (705)-527-4084 
Fax :   800-567-4069 (705)-527-4087 
E-Mail : [email protected] 
Eastern Europe 
EIKI CZECH SPOL. s.r.o. 
Nad Cementárnou 1163/4a 
Praha 4, Podolí 
147 00 
Czech Republic 
Tel :   +420 241 410 928 
  +420 241 403 095 
Fax:  +420 241 409 435 
E-Mail : [email protected] 
South East Asia 
EIKI Industrial (M) Sdn Bhd 
No. 3A-2C, 4th Floor, Jalan PJU 8/3A, 
Perdana Business Centre, 
Bandar Damansara Perdana, 
47820 Petaling Jaya, Selangor 
Malaysia 
Tel :   +603-7722-4362 
Fax :   +603-7722-4392 
E-Mail : [email protected] 
Japan & Worldwide 
EIKI Industrial Company Limited. 
4-12 Banzai-Cho, Kita-Ku, Osaka, 
530-0028 Japan 
Tel :   +81-6-6311-9479 
Fax :   +81-6-6311-8486 
WorldWide Website   http://www.eiki.com
© 2010 Eiki International, Inc.