Eiki Projector Lc Hdt10 User Manual

21
BEFORE OPERATION
MENU BAR
SETTING MENU
Used to change settings
of projector or reset Lamp
Replace Counter. 
(Refer to P35-38)
GUIDE WINDOW
Shows selected
item of ON-
SCREEN MENU.
SYSTEM BOX
Used to select computer
system or video system.
Shows selected system
on this box. 
(Refer to P26-27)
INPUT MENU
Used to select input
source (Input 1, Input 2,
Input 3 or Input 4). Refer
to P25.
SOUND MENU
Used to adjust sound[volume, Bass or Treble],to select Built-in SP On-
Off and Sound Mute. 
(Refer to P24)...

22
BASIC OPERATION
TURNING ON PROJECTOR
TURNING OFF PROJECTOR
TURNING ON / OFF PROJECTOR 
Connect a projectors AC Power Cord into a wall outlet and turn
MAIN ON/OFF SWITCH to ON. LAMP indicator lights RED, and
READY indicator lights GREEN.
Press POWER ON-OFF button on Side Control or on Remote
Control Unit to ON. LAMP indicator dims, and Cooling Fans start
to operate. Preparation Display appears on a screen and count-
down starts.  Signal from source appears after 30 seconds.
Current Input and Lamp...

23
BASIC OPERATION
ADJUSTING SCREEN
ZOOM ADJUSTMENT
FOCUS ADJUSTMENT
1Press ZOOM /button on Side Control or on Remote Control
Unit. Message “Zoom” is displayed.
2Press ZOOM button to make image larger, and press ZOOM
button to make image smaller.
1Press FOCUS /button on Side Control or on Remote Control
Unit. Message “Focus” is displayed.
2Adjust focus of image by pressing FOCUS /button(s) .
LENS SHIFT ADJUSTMENT
Message disappears after 4 seconds.
1Press the LENS SHIFT button on Side Control or...

24
BASIC OPERATION
1
2
Press MENU button and ON-SCREEN MENU will appear.  Press
POINT LEFT/RIGHT buttons to move a red frame pointer to
SOUND Menu icon. 
Volume
Press VOLUME (+/–) button(s) on Side Control or on Remote Control
Unit to adjust volume.  Volume dialog box appears on screen for a few
seconds.
(+) button to increase volume, and (–) button for decreasing.
Mute
Press MUTE button on Remote Control Unit to cut off sound.  To
restore sound to its previous level, press MUTE button again or press...

25
BASIC OPERATION
When connect component video output (Cr, Y, Cb or Pr, Y, Pb) from
video equipment to R/Pr, G/Y and B/Pb jacks.
WHEN SELECT INPUT 2 (5 BNC TERMINAL)
WHEN SELECT  INPUT 1 (SDI TERMINAL )
Input 1
INPUT MENU
SELECTING INPUT SOURCE
MENU OPERATION
DIRECT OPERATION
Select INPUT source by pressing INPUT 1/2 and INPUT 3/4
buttons on Side Control or INPUT 1, INPUT 2, INPUT 3 and
INPUT 4 on Remote Control Unit.
Press MENU button and ON-SCREEN MENU will appear. Press
POINT LEFT/RIGHT buttons to...

26
BASIC OPERATION
SYSTEM SELECT
This projector automatically tunes to most different types of computers based on VGA, SVGA, XGA, SXGA or UXGA (refer
to “COMPATIBLE COMPUTER SPECIFICATION” on pages 50-51). When a computer is selected, this projector
automatically tunes to incoming signal and projects the proper image without any special setting. (Some computers need to
be set manually.) 
The projector displays one of the Auto, -----, Mode 1 ~ Mode 20, or the system provided in the projector.
When...

27
BASIC OPERATION
SYSTEM SELECT MENU (SDI)
SYSTEM  SELECT Menu icon 
Displays system being selected.
Systems on this dialog box can
be selected.
Custom Mode (1~15) set in
DISPLAY ADJUST Menu.
(P30, 31)
SYSTEM SELECT MENU (Component video)
SYSTEM SELECT Menu icon 
Displays system being selected.
Systems on this dialog box can
be selected.
Custom Mode (1~15) set in
DISPLAY ADJUST Menu.
(P30, 31)
SELECT VIDEO SYSTEM
Press MENU button and ON-SCREEN MENU will appear.  Press
POINT LEFT/RIGHT buttons to move a...

28
DISPLAY ADJUST
DISPLAY ADJUSTMENTS
This projector has a picture screen resize function, which enables you to display desirable image size.
Press MENU button and ON-SCREEN MENU will appear.  Press
POINT LEFT/RIGHT button(s) to move a red frame pointer to
DISPLAY ADJUST Menu icon.1
Press POINT UP/DOWN button and move a red frame pointer to
Screen and then press SELECT button.2
Anamorphic
Provides image to fit the horizontal size of the screen size.
Full
Normal
Provides image in its original size....

29
DISPLAY ADJUST
AUTO PC ADJUSTMENT
Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots and Picture Position to conform to your
computer.  Auto PC Adjustment function can be operated as follows.
Press MENU button and ON-SCREEN MENU will appear.  Press
POINT LEFT/RIGHT button to move a red frame pointer to
DISPLAY ADJUST Menu icon.1
2Press POINT DOWN button to move a red frame pointer to
AUTO PC Adj. icon and then press SELECT button twice.
This Auto PC Adjustment can be...

30
DISPLAY ADJUST
MANUAL DISPLAY ADJUSTMENTS
This projector can automatically tune to display signals from most computers and video equipments currently distributed.
However, some computers and video equipments employ special signal formats which are different from standard ones and
may not be tuned by Multi-Scan system of this projector. If this happens, projector cannot reproduce a proper image and
image may be recognized as a flickering picture, a non-synchronized picture, a non-centered picture or a...