Eiki Projector EK-611W User Manual
Have a look at the manual Eiki Projector EK-611W User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 422 Eiki manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
— 36 — DLP Projector — Owner’s Manual PICTUREOUTPUT SETUP OPTIONLens Function No No Focus Zoom Lens Shift Lens Calibration Lens Lock ItemDescrIptIon FocusAdjust focus function on the projected image. ZoomAdjust zoom function on the projected image. Lens ShiftShift the projected image. Lens CalibrationPerform calibration and return lens to the center position. Lens LockSelect this function to prevent all lens motors from moving. • Yes: Lens shift will be locked. • No: Lens shift can be used by user. Menu Preferences Menu Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select SETUP and press the Enter button to enter the SETUP menu. Press the arrow keys (pq) to select Menu Preferences and press the Enter button to enter the Menu Preferences menu. Press the arrow keys (pq) to select the menu option and press the Enter button to enter its submenu. Press the arrow keys (pqtu) to select or adjust the desired settings and press the Enter button to confirm. PICTURE OUTPUT SETUP OPTIONMenu Preferences 0 On Menu Transparency Show Messages ItemDescrIptIon Menu TransparencyChange OSD menu background to be transparent. Show MessagesDisplay status messages on the screen.
— 37 — DLP Projector — Owner’s Manual Pin Menu Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select SETUP and press the Enter button to enter the SETUP menu. Press the arrow keys (pq) to select Pin and press the Enter button to enter the Pin menu. Press the arrow keys (pq) to select the menu option and press the Enter button to enter its submenu. Press the arrow keys (pqtu) to select or adjust the desired settings and press the Enter button to confirm. PICTUREOUTPUT SETUP OPTIONPin Off Pin Protect Change PIN ItemDescrIptIon PIN ProtectThe PIN (personal identification number) feature allows you to password protect your projector. Once you enable the PIN feature, you must enter the PIN before you can project an image. (PIN Default : 12345) Change PINChange the PIN.
— 38 — DLP Projector — Owner’s Manual Communications Menu Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select SETUP and press the Enter button to enter the SETUP menu. Press the arrow keys (pq) to select Communications and press the Enter button to enter the Communications menu. Press the arrow keys (pq) to select the menu option and press the Enter button to enter its submenu. Press the arrow keys (pqtu) to select or adjust the desired settings and press the Enter button to confirm. PICTUREOUTPUT SETUP OPTIONCommunications 19200 0 LAN WLAN Network Serial Port Baud Rate Projector ID ItemDescrIptIon LANConfigure the local area network (LAN) settings. • DHCP: Turn the DHCP ON/OFF. • IP Address: Assign Network IP Address. • Subnet Mask: Assign Network Subnet Mask. • Default Gateway: Assign Network Default Gateway. • MAC Address: Display the network MAC Address value. • Apply: Apply Network settings. WLANConfigure the wireless local area network (WLAN) settings. • Enable: Enable/Disable WLAN. • Start IP: Start of IP Address. • End IP: End of IP Address. • Subnet Mask: Assign Network Subnet Mask. • Default Gateway: Assign Network Default Gateway. • MAC Address: Display network MAC Address value. • SSID: Assign Network Service Set Identifier. NetworkConfigure the general network settings. • Projector Name: Display the projector hostname for Network. • Restart Network: Restart the network. • Network Factory Reset: Perform factory reset on the network settings. The Projector Name, LAN IP, WLAN IP, and SNMP settings will be reset. Serial Port Baud RateSelect the serial port and baud rate. Projector IDSet the projector ID number. The projector will respond to IR remotes set either at the same address as the projector or to IR remotes set to addr\ ess 0.
— 39 — DLP Projector — Owner’s Manual Option Menu Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select OPTION and press the Enter button to enter the OPTION menu. Press the arrow keys (pq) to select the menu option and press the Enter button to enter its submenu. Press the arrow keys (pqtu) to select or adjust the desired settings and press the Enter button to confirm. Auto Source High Altitude Test Pattern Background Color Hot-Key settings Power Settings Light Source Settings Information Factory Reset ServicePICTUREOUTPUT SETUP OPTIONOPTION On Off Off Logo Blank Screen ItemDescrIptIon Auto SourceSelect “On” to allow the projector to search for other signals if \ the current input signal is lost. When the setting is disabled, the projector will o\ nly search current input connection. High AltitudeSet high altitude mode On/Off. When On, the fan will operate at high speed to ensure sufficient air flow for high altitudes. Test PatternChoose the desired internal test pattern to display. Press the Pattern button to display next test pattern. Background ColorUse this feature to display a “Logo”, “Blue”, “Black” \ or “White” screen when no signal is available. Hot-Key settingsAssign a different function to the hot-key on the remote control by highlighting the function in the list and pressing the Enter button. Choose a function that does not already have a dedicated button, and assign the\ hot-key to that function, allowing you to quickly and easily use the cho\ sen function. Power SettingsConfigure the power settings. See “Power Settings Menu” on page 40. Light Source SettingsConfigure the light source settings. See “Light Source Settings Menu” on page 41. InformationDisplay the projector information for source, resolution, and software version on the screen. Factory ResetRestore all settings to their default value. It will not reset network. WARNING: After resetting, lens calibration is necessary. ServiceFor service only.
— 40 — DLP Projector — Owner’s Manual Power Settings Menu Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select OPTION and press the Enter button to enter the OPTION menu. Press the arrow keys (pq) to select Power Settings and press the Enter button to enter the Power Settings menu. Press the arrow keys (pq) to select the menu option and press the Enter button to enter its submenu. Press the arrow keys (pqtu) to select or adjust the desired settings and press the Enter button to confirm. Standby Power Mode Direct Power On Auto Standby Auto SleepPICTUREOUTPUT SETUP OPTIONPower Settings Communication mode Off 20 Mins No ItemDescrIptIon Standby Power ModeSet the standby power mode. • 0.5W mode: The projector is in standby mode when connected to AC power. (
— 41 — DLP Projector — Owner’s Manual Light Source Settings Menu Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select OPTION and press the Enter button to enter the OPTION menu. Press the arrow keys (pq) to select Light Source Settings and press the Enter button to enter the Light Source Settings menu. Press the arrow keys (pq) to select the menu option and press the Enter button to enter its submenu. Press the arrow keys (pqtu) to select or adjust the desired settings and press the Enter button to confirm. Light Source Mode Constant Power Settings Total Projector Hours Lamp Hours Reset Lamp HoursPICTUREOUTPUT SETUP OPTIONLight Source Settings Constant Power 10 ItemDescrIptIon Light Source ModeSelect Constant Power or Eco Mode. When in Eco Mode, the projector will adjust to the lowest fan speed and switch the light source power to\ the minimum setting. Constant Power SettingsSet the value of the light source power (in Watts). Total Projector HoursDisplay the overall projection time. Lamp HoursDisplay the lamp used hours. Reset Lamp HoursReset the lamp used hours counter to zero. Do this after changing the lamp.
— 42 — DLP Projector — Owner’s Manual Control Your Projector Using Web Browser Ethernet Projector Wired LAN Terminal functionalities Remote control and monitoring of a projector from a PC (or Laptop) via\ wired LAN is also possible. Compatibility with Crestron control boxes enables not only collective pr\ ojector management on a network but also management from a control panel on a PC (or Laptop) browser s\ creen. • Crestron is a registered trademark of Crestron Electronics, Inc. of the \ United States. Supported External Devices This projector is supported by the specified commands of the Crestron Electronics controller and related software (ex, RoomView ®). http://www.crestron.com/ For more detail of information about the diverse types of external devic\ es which can be connected to the Ethernet port and remote/control the projector, as well as the related control commands supporting for each external device, kindly please get contact with the Support-Service\ team directly. LAN_RJ45 1. Connect an RJ45 cable to Ethernet port on the projector and the PC (Laptop).
— 43 — DLP Projector — Owner’s Manual 2. On the PC (Laptop), select Start → Control Panel → Network and Internet. 3. Right-click on Local Area Connection, and select Properties. 4. In the Properties window, select the Networking tab, and select Internet Protocol (TCP/IP).
— 44 — DLP Projector — Owner’s Manual 5. Click Properties. 6. Click Use the following IP address and fill in the IP address and Subnet mask, then click OK. 7. Press the Menu button on the projector. 8. Select SETUP → Communications → LAN.
— 45 — DLP Projector — Owner’s Manual 9. After getting into LAN, input the following: • DHCP: Off • IP Address: 10.10.10.10 • Subnet Mask: 255.255.255.0 • Default Gateway: 0.0.0.0 10. Press the Enter / ► button to confirm settings. Open a web browser (for example, Microsoft Internet Explorer with Adobe Flash Player 9.0 or higher). 11. In the Address bar, input the IP address: 10.10.10.10. 12. Press the Enter / ► button. The projector is setup for remote management. The LAN/RJ45 function displays as follows.