Eiki Projector EK-601W User Manual

							— 37 — 
DLP Projector — Owner’s Manual
Audio Settings Menu
Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select SETUp and press 
the Enter button to enter the SETUp menu. Press the arrow keys (pq) to select Audio Settings and 
press the Enter button to enter the Audio Settings  menu. Press the arrow keys (pq) to select the menu 
option and press  the Enter button to enter its submenu. Press the arrow keys (pqtu ) to select or adjust 
the desired settings and press  the Enter button to confirm.
SETUP
Internal SpeakerAudio Settings
Mute
Volume
ExitOn
Audio Input
Audio Out(Standby) Off
ItemDescrIptIon
Internal Speaker
Choose the “On” or “Off” to turn on or off the internal speaker.
Mute Mute or unmute the volume:
• Choose the “On” to turn mute on.
•  Choose the “Off” to turn mute off.
Note: “Mute” function affects both internal and external speaker 
volume.
Volume Configure volume parameters.
• Audio: Adjust the volume level.
•  Mic: Adjust the microphone volume level.
Audio Input The default audio settings are on the back panel of the projector. Use this 
option to reassign any of the Audio Inputs (1, 2, or 3) to the current image 
source. Each Audio input can be assigned to more than one video source.
• Default: VGA 1 -> Audio 1; VGA 2 -> Audio 2; Video, S-Video -> Audio 3 
(L/R).
•  Audio 1 / 2: Mini jack connection.
•  Audio 3: L/R.
Audio Out(Standby) Choose the “On” or “Off” to turn on or off the audio out.  
						

							— 38 — 
DLP Projector — Owner’s Manual
Advanced Menu
Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select SETUp and press 
the Enter button to enter the SETUp menu. Press the arrow keys (pq) to select Advanced and press 
the Enter button to enter the Advanced menu. Press the arrow keys (pq) to select the menu option 
and press the Enter button to enter its submenu. Press the arrow keys (pqtu) to select or adjust the 
desired settings and press  the Enter button to confirm.
SETUP
LogoAdvanced
Logo Capture
Closed Captioning Exit
Default
Off
ItemDescrIptIon
Logo Use this function to set the desired startup screen. If changes are made\
 
they will take effect the next time the projector is powered on.
• Default: The default startup screen.
•  User: Create a customized startup screen using the Logo Capture 
function.
•  Neutral: Logo is not displayed on startup screen.
Logo Capture Press u to capture an image of the picture currently displayed on screen.
Closed Capturing Closed Captioning is a text version of the program sound or other 
information displayed on the screen. If the input signal contains closed\
 
captions, you can turn on the feature and watch the channels. 
Press t or u to select Off, CC1, or CC2.
HDBaseT Control Menu
Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select SETUp and press 
the Enter button to enter the SETUp menu. Press the arrow keys (pq) to select hDbaseT Control and 
press the Enter button to enter the hDbaseT Control menu. Press the arrow keys (pq) to select the 
menu option and press  the Enter button to enter its submenu. Press the arrow keys (pqtu ) to select or 
adjust the desired settings and press  the Enter button to confirm.
SETUP
EthernetHDBaseT Control
RS232 HDBaseT Mode ExitOff
Auto Off  
						

							— 39 — 
DLP Projector — Owner’s Manual
ItemDescrIptIon
EthernetEnable or disable the Ethernet feature.
RS232 Enable or disable the RS232 feature.
HDBaseT Mode Set the HDBaseT mode setting:
• Auto: The projector will automatically switch to the HDBaseT mode 
when it detects a signal from the HDBaseT port.
•  HDBaseT: The projector is switched to the HDBaseT mode.
Communications Menu
Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select SETUp and press 
the Enter button to enter the SETUp menu. Press the arrow keys (pq) to select Communications and 
press the Enter button to enter the Communications menu. Press the arrow keys (pq) to select the 
menu option and press  the Enter button to enter its submenu. Press the arrow keys (pqtu ) to select or 
adjust the desired settings and press  the Enter button to confirm.
SETUP
LANCommunication
Control Settings
Reset Exit
ItemDescrIptIon
LANConfigure the local area network (LAN) settings.
• Network Status: Display the network connection status (read-only).
•  MAC Address: Display the network MAC Address value.
•  DHCP: Turn the DHCP ON/OFF.
•  IP Address: Assign  Network  IP Address.
•  Subnet Mask: Assign Network Subnet Mask.
•  Default Gateway: Assign Network Default Gateway.
•  DNS: Display DNS number.
Control Settings • Crestron: Use this function to select the network function (port: 41794\
). 
For more information, please visit http://www.crestron.com and www.
crestron.com/getroomview.
•  Extron: Use this function to select the network function (port: 2023).\
•  PJLink: Use this function to select the network function (port: 4352).\
•  AMX Device Discovery: Use this function to select the network function 
(port: 1023).
•  Telnet: Use this function to select the network function (port: 23).
•  HTTP: Use this function to select the network function (port: 80).
Reset Reset the Communication menu items to their factory defaults.  
						

							— 40 — 
DLP Projector — Owner’s Manual
Options Menu
Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select OpTIOnS and press 
the Enter button to enter the OpTIOnS  menu. Press the arrow keys (pq) to select the menu option 
and press the Enter button to enter its submenu. Press the arrow keys (pqtu ) to select or adjust the 
desired settings and press  the Enter button to confirm.
OPTIONS
Input Source
Off
Source Lock
High Altitude
Information Hide
Keypad Lock
Display Mode Lock
Test Pattern Off
Off
Off
Off
None
ItemDescrIptIon
Input Source Use this option to enable/disable input sources. Press  u to enter the sub 
menu and select which sources you require. Press “Enter” to finalize the 
selection. The projector will only search for inputs that are enabled.
Source Lock • On: The projector will only search current input connection.
•  Off: The projector will search for other signals if the current input signal \
is lost.
High Altitude Set high altitude mode On/Off. When On, the fan will operate at high speed 
to ensure sufficient air flow for high altitudes.
Information Hide • On: Choose “On” to hide the info message.
•  Off: Choose “Off” to show the “searching” message.
Keypad Lock When the keypad lock function is “On”, the Keypad will be locked h\
owever, 
the projector can be operated by the remote control. By selecting “Of\
f”, you 
will be able to reuse the Keypad.
Display Mode Lock • On: Lock adjusting display mode settings.
•  Off: Unlock adjusting display mode settings.
Test Pattern Display a test pattern. There are Grid, White Pattern and None.
Background Color Use this feature to display a “Black”, “Red”, “Blue”, \
“Green” or “White” 
screen when no signal is available.
Wall Color Use this function to obtain an optimized screen image according to the 
wall color. The available options: “Off”, “Light Yellow”, “Light Green”, “Light 
Blue”, “Pink”, and “Gray”.
Remote Settings Configure the remote settings. “Remote Settings Menu” on page 41.  
						

							— 41 — 
DLP Projector — Owner’s Manual
ItemDescrIptIon
12V Trigger• On: Choose “On” to enable the trigger.
•  Off: Choose “Off” to disable the trigger. 
Reserved
IR_IN & detect
GND
Beep • Off: No beep sound is audible when a key is pressed or in an error 
event.
•  On: Beep sound is audible when a key is pressed or in an error event.
Advanced Configure the advanced settings. See “Advanced Menu” on page 42.
Lamp Settings Configure the lamp settings. See “Lamp Settings Menu” on page 43.
Optional Filter Settings Configure the optional filter settings. See “Optional Filter Settings Menu” on 
page 44.
Information Display the projector information for source, resolution, and software 
version on the screen.
Remote Settings Menu
Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select OpTIOnS  and press 
the Enter button to enter the OpTIOnS  menu. Press the arrow keys (pq) to select Remote Settings 
and press the Enter button to enter the Remote Settings menu. Press the arrow keys (pq) to select the 
menu option and press  the Enter button to enter its submenu. Press the arrow keys (pqtu ) to select or 
adjust the desired settings and press  the Enter button to confirm.
OPTIONS
Remote Settings
Test Pattern
User 1
IR Function
Exit
User 2
Projector Address
Zoom
All
ItemDescrIptIon
User 1 The default value is “Test Pattern”.
• Press u into the next menu and then use  t or u to select “HDMI2”, 
“DP”, “VGA2”, “S-Video”, “Test Pattern”, “Zoom”, or “Info.”, “HDBaseT“ 
item.
User 1
Test Pattern  
						

							— 42 — 
DLP Projector — Owner’s Manual
ItemDescrIptIon
User 2The default value is “Zoom”.
• Press u into the next menu and then use  t or u to select “HDMI2”, 
“DP”, “VGA2”, “S-Video”, “Test Pattern”, “Zoom”, or “Info.”, “HDBaseT“ 
item.
User 2
Zoom
IR Function • All: Choose “All”, the projector can be operated by the remote con\
trol 
from front or top IR receiver.
•  Front: Choose “Front”, the projector can be operated by the remote\
 
control from front IR receiver.
•  Top: Choose “Top”, the projector can be operated by the remote control 
from top IR receiver.
•  Off: Choose “Off”, the projector can’t be operated by the remote control 
from front or top IR receiver. By selecting “Off”, you will be able to use 
the Keypad keys.
Note: 
“Front” and “Top” cannot be selected in standby mode.
Projector Address Set the projector address. The projector will respond to IR remotes set 
either at the same address as the projector or to IR remotes set to addr\
ess 
0.
Advanced Menu
Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select OpTIOnS  and press 
the Enter button to enter the OpTIOnS  menu. Press the arrow keys (pq) to select Advanced and press 
the Enter button to enter the Advanced menu. Press the arrow keys (pq) to select the menu option 
and press the Enter button to enter its submenu. Press the arrow keys (pqtu ) to select or adjust the 
desired settings and press  the Enter button to confirm.
OPTIONS
Advanced
Off
Direct Power On
Sleep Timer (min)
Exit
Auto Power Off (min)
Quick Resume
Off
Standby Power Mode Eco.
ItemDescrIptIon
Direct Power OnThe projector automatically turns on when electrical power is connected.\
Auto Power Off (min) Automatically turns the projector off after no signals are detected for 
a preset number of minutes. If an active signal is received before the 
projector powers down, the image will be displayed.  
						

							— 43 — 
DLP Projector — Owner’s Manual
ItemDescrIptIon
Sleep Timer (min)This item allows the projector to automatically power off after it has been on 
for a specified amount of time.
Quick Resume • On: If the projector is accidentally turned off, this feature allows the 
projector to be instantly powered on again, if selected within a period \
of 
100 seconds.
•  Off: The fan will start cooling the system after 10 seconds when user 
turns off the projector. Quick Resume is not supported for WUXGA 
models due to the Power Down Refresh Mode.
Standby Power Mode Set the standby power mode.
• Normal: Choose “Normal” to return to normal standby
•  Eco.: Choose “Eco.” to save power dissipation further < 0.5W.
Lamp Settings Menu
Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select OpTIOnS  and press 
the Enter button to enter the OpTIOnS  menu. Press the arrow keys (pq) to select lamp Settings and 
press the Enter button to enter the lamp Settings menu. Press the arrow keys (pq) to select the menu 
option and press  the Enter button to enter its submenu. Press the arrow keys (pqtu ) to select or adjust 
the desired settings and press  the Enter button to confirm.
OPTIONS
Lamp Settings
On
Lamp Hours
Lamp Mode
Exit
Lamp Reminder
Power
Lamp Hours Reset
Bright
ItemDescrIptIon
Lamp Hours
Display the projection time.
Lamp Reminder Choose this function to show or to hide the warning message when the 
changing lamp message is displayed.
The message will appear 30 hours before suggested replacement of lamp.
Lamp Mode Select bright, Eco, or power mode. When in Eco mode, the projector 
will adjust to the lowest fan speed and switch the light source power to\
 the 
minimum setting.
Power Set the value of the light source power (in Watts).
Lamp Hours Reset Reset the lamp used hours counter to zero. Do this after changing the 
lamp.  
						

							— 44 — 
DLP Projector — Owner’s Manual
Optional Filter Settings Menu
Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select OpTIOnS and 
press the Enter button to enter the OpTIOnS  menu. Press the arrow keys (pq) to select Optional Filter 
Settings and press the Enter button to enter the Optional Filter Settings  menu. Press the arrow keys 
(pq) to select the menu option and press  the Enter button to enter its submenu. Press the arrow keys 
(pqtu ) to select or adjust the desired settings and press  the Enter button to confirm.
OPTIONS
Optional Filter Settings
Ye s
Filter Usage Hours
Filter Reminder
Exit
Optional Filter Installed
Filter Reset
500 hr
ItemDescrIptIon
Filter Usage Hours
Display the filter time.
Optional Filter Installed • Yes: Display warning message after 500 hours of use.
•  No: Turn off warning message.
Note: 
“Filter Usage Hours / Filter Reminder / Filter Reset” will only ap\
pear 
when “Optional Filter Installed” is “Yes”.
Filter Reminder Choose this function to show or hide the warning message when the 
changing filter message is displayed. (Factory default setting: 500 hours).
Filter Reset Reset the dust filter counter after replacing or cleaning the dust filer .  
						

							— 45 — 
DLP Projector — Owner’s Manual
Control your projector Using Web browser
Ethernet
projector
Wired LAN Terminal functionalities
Remote control and monitoring of a projector from a PC (or Laptop) via\
 wired LAN is also possible.
Compatibility with Crestron control boxes enables not only collective pr\
ojector management on a network 
but also management from a control panel on a PC (or Laptop) browser s\
creen.
•  Crestron is a registered trademark of Crestron Electronics, Inc. of the \
United States.
Supported External Devices
This projector is supported by the specified commands of the Crestron Electronics controller and related 
software (ex, RoomView ®).
http://www.crestron.com/
For more detail of information about the diverse types of external devic\
es which can be connected to the
Ethernet port and remote/control the projector, as well as the related control commands supporting for
each external device, kindly please get contact with the Support-Service\
 team directly.
LAN_RJ45
1. Connect an RJ45 cable to Ethernet port on the projector and the PC (Lap\
top).  
						

							— 46 — 
DLP Projector — Owner’s Manual
2. On the PC (Laptop), select Start → Control panel → network and Internet.
3. Right-click on local Area Connection , and select properties.
4. In the properties window, select the networking tab, and select Internet protocol (TCp/Ip) .