Eiki Projector EK-500U User Manual

51
OSD setting-Memory Viewer
Set slide
Start the slide show.
Slide transition effect
Set the slide transition effect when the slide 
show image is switching.
Slide down ... Switch the image from the top to 
                        the bottom.
Slide right .... .Switch the image from the left to 
                        the right.
Sort order
Set the sort order of the slide show.
Extend Order ...... Sort files or folders in 
                              extended order.
Size Order .......... Sort files or...

52
OSD setting-Memory Viewer
Repeat
Set whether or not to play the slide show repeatly.
On ...... Repeat broadcast the first file after the last file is broadcasted.
Off ...... Return to the thumbnail display after the last file is broadcasted. 
Apply
Execute the setting in slide show.
The projected content of Memory Viewer function
Memory Viewer function supports the following picture files.
PictureExtension name
Format Description
Jpg / jpeg Baseline encoder 24
Progressive RGB 24 bit Max resolution:...

53
OSD setting-Info.
Select this function to detect projection image signal and operation sta\
tus of your projector. 
Press 
 button to select the Info. icon. The Information menu displays. 
See below for messages shown in the menu. 
Input                            Memory viewer                                   - - - - H- sync. freq.                         - - -   KHz
V- sync. freq.                          - - -    Hz
Lamp Status                        
Lamp counter                             61 H...

Description on using useful function  

55
Operation steps1  Power on your projector.
2  Acquire the IP address, with DHCP set to on and auto IP allocation set to On. (You 
may set DHCP to Off and set up IP address manually if you are somehow familiar with 
networking.) 
3  Enter the network setup menu
Description on network control operation
Network control operation
Function: This function is designed to remote control computer in the same LAN.
Preparation 1  Required equipment: Projector, connection, network cable 
2 Connection:   
Connect...

56
1) Start the computer's Web browser.
2)  Enter the IP address on the projector set in the URL input field of the Web browser.
3)  Click [Login], and enter the password in the [Password].
      "* "the factory default setting is the user name: "admin" (admini\
strator privileges), pass -
word: "admin".
4) Click the [Login]
Description on network control operation
Enter through a Web browser
NOTE:
Users can click on the top right corner of the Web browser screen to select the...

57
Description on network control operation 
①Versions: Displays the firmware version of the projector.
②LAN Status: Displays the connection status of LAN.
Display [Set Webpage Password] page.
[General  Setup] page
①Enter old password: Enter the password for the configuration. 
②Enter new password: Enter a new password.  
③Confirm new password: Re-enter the new password required to confirm. 
④Power & Source: Update settings. 
⑤ Power: Switch on the power of the projector on / off. 
⑥ Source select:...

58
[Image Setup] page
①  Aspect: Switch the aspect of the projected image.
②Fine sync: Adjust the phase of the projected image.
③ H Position:  Adjust the horizontal position of the projected image.  
④V Position: Adjust the vertical position of the projected image.  
⑤H Size: Adjust the horizontal dimension of the projected image.  
⑥ Freeze: Select the function to switch the screen freeze on and off.
 Auto PC adj.: Select the function to adjust the PC automaticlly.
 V Keystone: Select the function to...

59
② Play or stop  
③ Select screenshot mode .
Play or stop projec the selected pictures.
 Select screenshot mode 
from the "full range", "fixed size" or "variable size" and
5)  PwPresenter 
Software: when the input signal source is chosen as the network, the netw\
ork will be 
used to project computer image.
After entering the IP address of the projector in the web page to the main interface, click "\
 Down-
load", and download the corresponding PwPresenter software with...

60
Basic setting:  Language, Capture region 
size etc. Advanced setting: JPEG image setting, 
Network port setting, White list and Black 
list etc.
Parameter Setting
 ④
Global setting:
 Remote control setting, 
Sound capture and  Screen capture, etc. Multicast setting: V
olume setting, Bandwidth, 
Sampling frequency, etc.
Description on network control operation