Eiki Projector EK-500U User Manual

31
Adjustment pad
Keystone adjustment
Adjustable pad
You may use the adjustment leg to raise your pro
-
jector up to 5.0 degree.
Turn the pad to tilt your projector to required height. 
To raise your projector, turn both pads clockwise.
To lower down your projector or close the pad, turn 
both pads counterclockwise.
You may use the auto setup function to adjust your 
projector’s keystone distortion automatically or do 
this with the remote controller or OSD menu manu -
ally.
You may adjust keystone...

32
Menu item overview
Main menuSubmenuDisplayAuto PC adj.                                 Fine syncH Position                                 V Position                                 
H size                             
Aspect                           
Project way                             
Menu position                                
Background display  
System 0
0
0
0
Normal Front
Upper left
Blue
- - - -
① ② ③④
⑤⑥
⑦
 Display
Select Auto PC Adjust, Fine sync., H Position, V Position, H size,...

33
Main menu SubmenuDisplayAuto PC adj.                                 Fine syncH Position                                 V Position                                 
H size                             
Aspect                           
Project way                             
Menu position                                
Background display  
System 0
0
0
0
Normal Front
Upper left
Blue
- - - -
How to use the OSD
Menu operation
1.  Press the MENU button on the rear control 
panel or remote controller and...

34
Remote controller operation
Use your remote controller for common operations.
Screen size selection (SCREEN)
Press the SCREEN button on remote controller 
to select required screen size mode.
Digital Zoom (D.ZOOM+/-)
Press the D.ZOOM+/- button on remote con-
troller to enter the Digital Zoom mode. 
*Only for input as VGA, RGBHV, and the 
screen size setting as Normal or Wide. 
Volume +/- (VOLUME +/-)
Increase or decrease volume. 
Timer (TIMER)
Press the TIMER button on remote controller. 
A timer...

35
Input selection
Direct Operation
Press HDMI, VGA, VIDEO, D VI, C OMPON EN T, 
RGBHV, USB or S-VIDEO on the remote 
control as input source. When input source is from com-
puter connected to VGA ter-
minal with VGA cable,  please 
select "VGA".
When input source is from BNC 
connected to RGBHV terminal 
with BNC*5 cable,  please se-
lect "RGBHV".
 Note:
  -  When the "Input search" function is set to "On" in the "Auto setup" func\
tion, the input signal will...

36
Input selection
When input source is from 
network connected to LAN 
terminal with LAN cable, please 
select "Network". When input source is from 
device connected to USB-A 
terminal, please select "Memory 
Viewer".When input source is from   
device connected to Micro-USB 
terminal, please select "USB 
Display". Network
Memory Viewer
 USB Display
 Note:
  -  When the "Input search" function is set to "On" in the "Auto setup" func\
tion, the input...

37
DisplayAuto PC adj.                                 Fine syncH Position                                 V Position                                 
H size                             
Aspect                           
Project way                             
Menu position                                
Background display  
System 0
0
0
0
Normal Front
Upper left
Blue
- - - -
Input selectiong
System selection
The scanning system and auto computer adjustment function may detect scores of signal format....

38
OSD Setting-Display
Auto  PC Adjusting
The Auto PC Adjusting function may get Total Dots, Horizontal and Vertical position, Display area H, 
and Display area V aligned with computer input. Menu Operation
1  Press the MENU button on remote controller 
and the OSD displays. Press 
 button to 
select Display icon. Press  button or OK 
button and the Display menu displays. 
2 Press 
 button to point to Auto PC Adj. op-
tion, press OK button to confirm your choice. 
 Note: 
 
● Fine sync, H and V position...

39
Manual computer adjustment
The scan system of your projector may fail to detect signal format used \
by certain computers as 
they opted some special signal format. The manual computer adjustment function of your projector 
enables you to adjust individual parameter to align with most special si\
gnal format. Your projector 
comes with up to storage area to keep parameters manually adjusted by yo\
u. You may save pre-
ferred settings for certain computers as required. 
1  Press MENU button on the...

40
DisplayAuto PC adj.                                 Fine syncH Position                                 V Position                                 
H size                             
Aspect                           
Project way                             
Menu position                                
Background display  
System 0
0
0
0
Normal Front
Upper left
Blue
- - - -
DisplayAuto PC adj.                                 Fine syncH Position                                 V Position...