Eiki Projector EK-500U User Manual

							51
OSD setting-Memory Viewer
Set slide
Start the slide show.
Slide transition effect
Set the slide transition effect when the slide 
show image is switching.
Slide down ... Switch the image from the top to 
                        the bottom.
Slide right .... .Switch the image from the left to 
                        the right.
Sort order
Set the sort order of the slide show.
Extend Order ...... Sort files or folders in 
                              extended order.
Size Order .......... Sort files or folders in 
                              amount of data order.
Time Order ......... Sort files or folders in stored 
                              time order.
Name Order ....... Sort files or folders in name 
                             order.
 Note:
● The "Memory Viewer" menu is available 
    when input the "Memory Viewer" signal.
● The menu except for "Set Slide" which setting 
    have been changed is not yet effective 
    before the "Apply" is not executed.
Set slide
Slide transition effect　　　　　　　　　　　  Slide right
Sort order　　　　　　　　　　　　　　　  Name order
Rotate　　　　　　　　　　　　　　　　　   No rotate
Best fit　　　　　　　　　　　　　　　　　　      Off
Repeat　　　　　　　　　　　　　　　　　　　　  Off
Apply
Memory Viewer
 
Memory Viewer
Project the pictures which are stored in the USB memory when the USB mem\
ory is inserted into 
the projector
1.  Press the MENU button on remote controller and the OSD displays. Press 
 button to select 
Memory Viewer icon, press  button or OK button to enter the submenu.
2.  Press  button to point to required item, press  button or OK button to confirm your selec -
tion. 
3.  Press 
 button to point to required item, press OK button to confirm your selection.
Rotate
Set the rotate direction of image.
No Rotate ........... Rotate is disabled.
270 Degrees ......  Rotate 270 degrees in anti-clockwise direction.                            
180 Degrees ......  Rotate 180 degrees.
90 Degrees ........  Rotate 90 degrees in anticlockwise direction.
Best fit
Set the image whether or not to fit with the projected screen.
On ...... Display the image to fit with the aspect of the projected screen.
Off ......   Display in the normal pixels of the image. Set whether or not to play th\
e slide show repeat-
l y.  
						

							52
OSD setting-Memory Viewer
Repeat
Set whether or not to play the slide show repeatly.
On ...... Repeat broadcast the first file after the last file is broadcasted.
Off ...... Return to the thumbnail display after the last file is broadcasted. 
Apply
Execute the setting in slide show.
The projected content of Memory Viewer function
Memory Viewer function supports the following picture files.
PictureExtension name
Format Description
Jpg / jpeg Baseline encoder 24
Progressive RGB 24 bit Max resolution: 10000x10000
Max resolution: Panel Resolution
bmp 1.4.8 bit palette-based 
RGB 24,32 bit Max resolution: 1280x800
png 24, 48-bit True Color -24-Bit color palette space
Max resolution: 1024x768
gif 1,4,8-bit palette-based Max resolution: 800x600  
						

							53
OSD setting-Info.
Select this function to detect projection image signal and operation sta\
tus of your projector. 
Press 
 button to select the Info. icon. The Information menu displays. 
See below for messages shown in the menu. 
Input                            Memory viewer                                   - - - - H- sync. freq.                         - - -   KHz
V- sync. freq.                          - - -    Hz
Lamp Status                        
Lamp counter                             61 H
Power management                       Re
ady                                      5  Min
Image mode                           Standard Info.
①
⑤
⑦ ⑥ ②
③
④
 
Input Display selected input and current signal format.
 H- sync. Freq. Display horizontal frequency of input signal in unit of KHz. Show “---KHz” 
when no signals are in existence. 
 
V- sync. Freq. Display vertical frequency of input signal in unit of Hz. Show “---Hz\
” 
when no signals are in existence. The frequency (Hz) doubles in case of 
progressive display.
 
Lamp status  Display selected lamp mode. 
 Lamp counter Display time of the lamp in service.
 Power 
management  Display selected power management mode. 
 
Image mode Display selected image mode.  
						

							Description on using useful function  
						

							55
Operation steps1  Power on your projector.
2  Acquire the IP address, with DHCP set to on and auto IP allocation set to On. (You 
may set DHCP to Off and set up IP address manually if you are somehow familiar with 
networking.) 
3  Enter the network setup menu
Description on network control operation
Network control operation
Function: This function is designed to remote control computer in the same LAN.
Preparation 1  Required equipment: Projector, connection, network cable 
2 Connection:   
Connect your projector to a router or switch in the LAN with normal or j\
umper network 
cable. In case a normal network cable failed to connect successfully, use a jumper cable 
instead. 
3  Turn on the computer. The LAN port and computer port of your projector flashes after it is 
powered on.  
Network setting
Network information   
MAC address：　　　　　　  00:1E:CO:F2:11:E6
IP address：　　　　　　　　　　 192.168.1.100
                     Network
   Set             Cancel
LAN                                  Network Setting
DHCP                        Off
IP address                   192 .  168  .   1  .  100
Subnet                         255 .  255  .  255 .  0
Gateway                  192 .  168  .  1   .  1
DNS                           192 .  168  .  1   .  1
(1)  Press MENU button on remote 
controller or top of the control panel, 
press 
 button to select network 
icon.
(2)  Press ENTER button or 
 button and 
the network menu displays.
(3) Press 
 button select network 
settings and press ENTER to confirm. 
(4) Press 
 button to set DHCP On 
and press OK button to confirm.
(5) Press 
 button to select Set, press 
OK button to wait until the “Please 
wait..” message disappears.  
						

							56
1) Start the computer's Web browser.
2)  Enter the IP address on the projector set in the URL input field of the Web browser.
3)  Click [Login], and enter the password in the [Password].
      "* "the factory default setting is the user name: "admin" (admini\
strator privileges), pass -
word: "admin".
4) Click the [Login]
Description on network control operation
Enter through a Web browser
NOTE:
Users can click on the top right corner of the Web browser screen to select the display  lan-
guage.
Do not start multiple Web browser settings or control. Do not use more than one computer 
set or control the projector.
Please change your password.
If the network does not appear on screen controls, please consult your network adminis -
trator. Description of each option
① System Status: Click this option to display the [System status] page.
②General Setup: Click this option to display the [General Setup] page.
③ Picture Setup: Click this option to display the [Picture Setup] page.
④Image Setup: Click this option to display the [Image Setup] page.
⑤Network Setup: Click this option to display [Network Setup] page.
Display the mode of the projector for the following items.
[System Status] page  
						

							57
Description on network control operation 
①Versions: Displays the firmware version of the projector.
②LAN Status: Displays the connection status of LAN.
Display [Set Webpage Password] page.
[General  Setup] page
①Enter old password: Enter the password for the configuration. 
②Enter new password: Enter a new password.  
③Confirm new password: Re-enter the new password required to confirm. 
④Power & Source: Update settings. 
⑤ Power: Switch on the power of the projector on / off. 
⑥ Source select: Switch the input source of the projector.
[Picture Setup] page
①Brightness: Adjust the brightness of the projected image.
②Contrast: Adjust the contrast of the projected image.
③Sharpness:  Adjust the sharpness of the projected image.
④Saturation:Adjusts color saturation of the projected image.
⑤Tint: Adjusts the tint of the projected image.
⑥Color  Temperature:  Adjust the color temperature of the projected image.  
						

							58
[Image Setup] page
①  Aspect: Switch the aspect of the projected image.
②Fine sync: Adjust the phase of the projected image.
③ H Position:  Adjust the horizontal position of the projected image.  
④V Position: Adjust the vertical position of the projected image.  
⑤H Size: Adjust the horizontal dimension of the projected image.  
⑥ Freeze: Select the function to switch the screen freeze on and off.
 Auto PC adj.: Select the function to adjust the PC automaticlly.
 V Keystone: Select the function to correct the distortion in the vertical direction.
Description on network control operation
Display [Set W ebpage Password] page.
If you want to enable the DHCP client, select the IP address automatically. 
IP address: 
Please enter the IP address when you do not use the DHCP server. 
Subnet : 
Please enter a subnet shield,when you do not use the DHCP server . 
Gateway: 
Please enter the gateway ,when you do not use the DHCP server. 
DNS: 
Please enter the DNS address, when you do not use the DHCP server. 
A vailable characters : digital (0 - 9), a period (.)  
(For example: 192.168.0.253)  
Update settings.
Display the mode of the projector for the following items.
②Application
[Network Setup] page
①  Network Setup  
						

							59
② Play or stop  
③ Select screenshot mode .
Play or stop projec the selected pictures.
 Select screenshot mode 
from the "full range", "fixed size" or "variable size" and
5)  PwPresenter 
Software: when the input signal source is chosen as the network, the netw\
ork will be 
used to project computer image.
After entering the IP address of the projector in the web page to the main interface, click "\
 Down-
load", and download the corresponding PwPresenter software with your pro\
jector.  
① S earch and connect projector 
Click to enter to search, select the needed projector and connect it . S et the same IP address (for ex-
ample: 192.168.1.100) as the projector in pwPresenter software ,and set\
 user type as "average user", 
and the password is "admin".
NOTE
     · Before using the pwPresenter search, please switch to network signal sou\
rce.
①
③
④②⑤
Description on network control operation
6  Click   the icon to enter into pwPresenter software.
⑥  
						

							60
Basic setting:  Language, Capture region 
size etc. Advanced setting: JPEG image setting, 
Network port setting, White list and Black 
list etc.
Parameter Setting
 ④
Global setting:
 Remote control setting, 
Sound capture and  Screen capture, etc. Multicast setting: V
olume setting, Bandwidth, 
Sampling frequency, etc.
Description on network control operation