Eiki Projector EK-300U User Manual

							31
Direct Operation
Press VGA, HDMI or Video on the remote control 
as input source. 
Menu operation
1 Press INPUT button on the top control to 
   display the input select menu. 
2  Press   button to select VGA 1, VGA 2, 
HDMI, Component, Video, S-video, Network, 
Memory Viewer or USB Display, then press 
the OK button.
Basic operation
Input select menu
Remote control
VGA
VIDEO HDMI
MENU
INPUT
FREEZE
MUTE
BLANK
LAMP PATTERN
KEYST ONE
TIMERINFO.
SCREEN IMAGE
AUT
O
+ +
- -D.ZOOM VOLUME
Input select
When input source is from 
network connected to LAN 
terminal with LAN cable, please 
select "Network".
When input source is from device 
connected to USB-A terminal, 
please select "Memory Viewer".
When input source is from   device 
connected to USB-B terminal, 
please select "USB Display". Network
Memory Viewer
 USB Display
Note:
  -  When the "Input search" function is set to "On" in the "Auto setup" function, press  AUTO button, 
    the input signal will be searched automatically.
  -  When signal is in "USB Display","Memory Viewer" and "Network", FREEZE, ASPECT, IMAGE, 
    AUTO SETUP and SCREEN function cannot work.   
  - Memory Viewer function, please refer to page 62-63.
  - USB Display function, please refer to page 64-65. Top control
INPUT button
INPUT
VGA 1
VGA 2
HDMI
HDMI 2(MHL)
Component
Video
S-video
Network
Memory Viewer
USB Display
Select it when the video input 
signal is connected to S-VIDEO 
IN terminal. S-video  
						

							32
Display
Auto PC adj.
Auto PC Adjustment function is provided to automatically adjust Fine sync, Horizontal, Vertical and H.Size 
to conform to your computer.
Menu operationNote:
  -  The projector executes the Auto PC adj. 
     automatically when the computer signals input 
     the projector for the first time.
  -  Automatic adjustment may not work depending 
     on the model of the computer and the input 
     signal.
  -  The Auto PC adj. cannot be operated when 
     480i, 576i, 480p, 576p, 720p 1080i or 1080p is 
     selected in the "Display" menu → "System", 
     or when the signal is coming from the HDMI
     terminal. 
Auto PC adj.
Auto PC adj. Menu
1. Press MENU button on the remote control  
    or top control to display screen menu. 
    Press   button to select "Display", then 
    press the OK button.
2. Press   button to select "Auto PC adj.", 
    then press the OK button. "Please wait" will 
    be displayed on the screen, the Auto PC adj. 
    function will be executed.
Fine sync
H Position
V Position
H. Size
√ Note:
   The adjustment of Fine sync, H Position, V 
   Position and H.Size is only for computer 
   signal input.
You can cut off flicker from the image displayed 
by pressing 
 to adjust the value.(from 0 to 
31).
Press   to adjust the horizontal image 
position.
Press   to adjust the vertical image position.
This function is used to adjust and minimize 
the effect of interference caused by projection 
of patterns consisting of vertical stripes. 
The projection of the vertical striped pattern 
may cause cyclic patterns (noise). Adjust to 
minimize the amount of interference.(From -15 
to +15).
H.Size must be set before adjust Fine sync.
Display
Auto PC adj.
Fine sync
H Position
V Position
H. Size
Aspect
Project way
Menu position
Background display
System 17
0
0
0
Normal Front
Center Blue
1024 x 768, 60Hz           
						

							33
Project way menu
Aspect menu
This function is used to set the project way.
1 Press MENU button on the remote control 
   to display screen menu. Press   button to 
   select "Display", then press the OK button.
2 Press  button to select "Project way", 
   press the OK button.
3 Press  button to select the item you want 
   to set, press the OK button.
Front 
Projects to front screen when projector is front 
standing.             
Rear
Projects to rear screen when projector is front 
standing.
Ceiling/Front
Projects to front screen when projector is in ceiling 
state.   
Ceiling/Rear
Projects to rear screen when projector is in ceiling 
state.
Auto ceiling/Front
Projects to front screen and modify as front 
standing or ceiling automatically. 
Auto ceiling/Rear
Projects to rear screen and modify as front 
standing or ceiling automatically.
Project Way
Display
Aspect
You can set a  screen size to fit the image while 
maintaining the aspect ratio of the input signal.
1. Press   to  select "Aspect" and then 
    press the OK button.
2. Press   button to select the item, then 
    press the OK button.  
Normal
Projects the image at the maximum size while 
maintaining the aspect ratio of the input signal.
Wide
Projects the image at 16:9 aspect ratio.
Full 
To provide an image to fit the screen.
Advanced  (PC input only)
Adjust the proportion and position of the screen 
manually.
Display
Auto PC adj.
Fine sync
H Position
V Position
H. Size
Aspect
Project way
Menu position
Background display
System 17
0
0
0
Normal Front
Center Blue
1024 x 768, 60Hz
Display
Auto PC adj.
Fine sync
H Position
V Position
H. Size
Aspect
Project way
Menu position
Background display
System 17
0
0
0
Normal Front
Center Blue
1024 x 768, 60Hz                    
						

							34
Display
Background displayBackground Display
This function is used to select the screen 
background of the projector when there is no 
signal detected.
1 Press MENU button on the remote control 
   or top control to display screen menu. Press 
     button to select "Display", then press 
    the OK button.
2 Press   button to select "Background  
   display", press the OK button.
3 Press   button to select the item you want 
   to set, press the OK button.
Black .... Select black background.
Blue ...... Select blue background.
Menu Position
This function is used to change the position of 
screen menu. 
1 Press MENU button on the remote control 
   to display screen menu. Press   button to 
   select "Display", then press the OK button.
2 Press  button to select "Menu position", 
   press the OK button.
3 Press  button to select the item you want 
   to set, press the OK button.
Upper left 
Menu locates on upper left of the screen.
Upper right
Menu locates on upper right of the screen.
Center
Menu locates at the center of the screen.
Lower left
Menu locates on lower left of the screen.
Lower right
Menu locates on lower right of the screen.
Menu position 
Display
Auto PC adj.
Fine sync
H Position
V Position
H. Size
Aspect
Project way
Menu position
Background display
System 17
0
0
0
Normal Front
Center Blue
1024 x 768, 60Hz
Display
Auto PC adj.
Fine sync
H Position
V Position
H. Size
Aspect
Project way
Menu position
Background display
System 17
0
0
0
Normal Front
Center Blue
1024 x 768, 60Hz                    
						

							35
Display
Display
System     1024 x 768, 60Hz
      ----
      ----
      ----
      ----
      ----
System for computer signal

Note:
When HDMI, Network, Memory Viewer, USB 
Display is selected, System menu for computer 
is disable.
Select computer system manually
The system can also be selected manually.
1 Press MENU button on the remote control or   
   on top control to display the screen menu.  
   Press   button to select the "Display" icon, 
   and press the OK button.
2 Press   button to select "System" and 
   press the OK button.
3 Press   button to select your required 
   system and then press the OK button.
Video or S-video
Auto
The projector automatically detects an incoming 
video system,and adjusts itself to optimize its 
performance. When Video System is PAL-M, 
PAL-N or PAL60, select the system manually.
PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N/
PAL60
If the projector cannot reproduce proper video 
images, select a specific broadcast signal format 
from PAL, SECAM, NTSC, NTSC 4.43, PAL-M, 
PAL-N and PAL60.Display
System     AUTO
     PA L
     SECAM
     NTSC
     NTSC4.43
     PAL-M
     PAL-N
     PAL60
System for Video or S-video signal
Display
Auto PC adj.
Fine sync
H Position
V Position
H. Size
Aspect
Project way
Menu position
Background display
System 17
0
0
0
Normal Front
Center Blue
1024 x 768, 60Hz
System
System menu
System
Computer system select
The projector automatically tunes to various types of computers with its\
 function of Multi-scan system and 
Auto PC Adjustment. If a computer is selected as a signal source, the projector \
automatically detects the 
signal format and tunes to project proper images without any additional \
setting.
One of the following messages may appear:
Auto
-----
When the projector cannot recognize 
the connected signal conforming to 
the provided computer system, Auto 
is displayed on the System menu 
box and the Auto PC Adj. function 
works to display proper images. If 
the image is not projected properly, a 
manual adjustment is required.
There is no signal input from computer. 
Check the connection between your 
computer and projector.                             
						

							36
Image Mode
Color adjust menu is used to set the image mode and adjust the image. 
Menu operationDirect operation
Press IMAGE button on the remote control to 
select the image mode.
Image mode (Computer)IMAGE
button
Remote control
VGA
VIDEO HDMI
MENU
INPUT
FREEZE
MUTE
BLANK
LAMP PATTERN
KEYST ONE
TIMER
INFO.
SCREEN IMAGE
AUT
O
+ +
- -D.ZOOM VOLUME
Color adjust
Image mode
Contrast
Brightness
Color temp.
Red
Green
Blue
Sharpness Standard
32
32
Mid 32
32
32 8
Color adjust
1 Press MENU button on the remote control or  
   top control to display screen menu. Press 
      button to select "Color adjust" menu, 
   then press the OK button.
2 Press  button to select "Image mode", 
   press the OK button.
3 Press  button to select the item you want 
   to set, press the OK button.
Cinema
For watching movies with multiple gray scale 
levels.
Blackboard (Green)
For viewing the image projected on a blackboard 
(green) by enhancing the image quality. This is 
mainly effective on a green colored board instead 
of a black colored board.
Colorboard
For images projected onto a red, blue, yellow, or 
green wallpaper.
User Image
Image quality preset by the user in the Image 
adjustment menu. Dynamic
The light output is maximized for use in bright 
areas.
Standard
The picture becomes suitable for moving images 
in general.
1    Press MENU button on the remote control or       
top control to display screen menu. Press 
     button to select "Color adjust", then 
press the OK button.
2 Press button to select  the item you 
   want to set,  press the OK button.
3 Press button to adjust the item, then 
   press the OK button.           
						

							37
Color adjust
Color adjust (Computer)
Color adjust
Image mode
Contrast
Brightness
Color temp.
Red
Green
Blue
SharpnessStandard
32
32
Mid 32
32
32 8
Color adjust (Computer)
Contrast
Press   to decrease the contrast and 
 to 
increase it.
Brightness
Press   to decrease the brightness and 
 to 
increase it.
Color temp.
Press  to select color temperature.( Low, Mid 
and High )
Red (White balance)
Press   to lighten the red tone and 
 to deepen 
it.
Green (White balance)
Press   to lighten the green tone and 
 to 
deepen it.
Blue (White balance)
Press   to lighten the blue tone and 
 to deepen 
it.
Sharpness
Press   to decrease the sharpness of the image 
and   to increase it.
1 Press MENU button on the remote control or 
   top control to display screen menu. Press 
   
  button to select "Color adjust", then 
   press the OK button.
2 Press  button to select  the item you want 
   to set,  press the OK button.
3 Press  button to adjust the data.           
						

							38
Color adjust
Image mode
Contrast
Brightness
Color 
Tint
Red
Green
Blue
SharpnessStandard
32
32
32
32
32
32
328
Color adjust
Color adjust (Video, S-video, Component)
Color adjust (Video,S-video,Component)
Contrast
Press   to decrease the contrast and 
 to 
increase it.
Brightness
Press   to decrease the brightness and 
 to 
increase it.
Red (White balance)
Press   to lighten the red tone and 
 to deepen 
it.
Green (White balance)
Press   to lighten the green tone and 
 to 
deepen it.
Blue (White balance)
Press   to lighten the blue tone and 
 to deepen 
it.
Sharpness
Press   to decrease the sharpness of an image 
and   to increase it.
1 Press MENU button on the remote control or 
   top control to display screen menu. Press 
   
  button to select "Color adjust", then  
   press the OK button.
2 Press  button to select  the item you want  
   to set,  press the OK button.
3 Press  button to adjust the data.
Color
Press 
 to decrease the chroma and 
 to 
increase it.
Tint
Press   to select the appropriate tone for the 
image.
√ Note:
  - Signal input "Video", "S-video" or  "Component", 
   "Tint" is in grey, it is disable.
  - If you only adjust projector to "Video", "S-video" 
    or "Component" , "Sharpness" is disable.           
						

							39
The projector has "Setting" menu that allows you to set the other various functions described as 
follows.Setting menu
On start
Standby mode
Setting
Setting
On start
Standby mode
High land
Lamp control
Cooling fast
Closed caption
Key lock
Iris
Terminal
Sound
HDMI SetupOff
Eco Off
Normal Off
On
Computer 2
Setting
On start
Standby mode
High land
Lamp control
Cooling fast
Closed caption
Key lock
Iris
Terminal
Sound
HDMI Setup Off
Eco Off
Normal Off
On
Computer 2
Setting
On start
Standby mode
High land
Lamp control
Cooling fast
Closed caption
Key lock
Iris
Terminal
Sound
HDMI Setup Off
Eco Off
Normal Off
On
Computer 2
Enable the projector to be turned on 
automatically just by connecting the AC 
power cord to an outlet when this function 
is set to On.
On
Start the projection immediately, enter 
countdown display.
Off 
Start up in the standby mode.
This function is available when operating the 
projector via network.
Press  button to select the item below:
Eco.
Restrict some functions in the standby mode to 
reduce power consumption. In this case, you 
cannot use network functions and some RS-232C 
commands.
Normal 
Do not restrict network function and serial 
communication function even in the standby 
mode.
1 Press MENU button on the remote control or   
   top control to display screen menu. Press 
   
  button to select "Setting", then press 
   the OK button.
2 Press  button to select  the item you 
   want to set,  press the OK button.
3 Press  button to adjust the item, then 
   press the OK button.
Standby mode
On start                             
						

							40
Setting
Enable to control the fan through the Setting 
menu.
You can select the running speed of the fan 
according to the altitude of the location where 
the projector is installed.
Off 
Normal speed. Set it so if the projector is 
operated at a lower altitude.
On 
Faster than Off. Set it so if the projector is 
operated at a higher altitude as fans will produce 
weaker effects.
Note:
  Please set High land "On" when operating the   
  projector higher than 1400 meters.
Change the brightness of the screen.
  Normal ....  Normal brightness.
 
Eco ..........   Lower brightness, reducing power 
consumption and extending the 
lamp life.
This function provides the following options in 
the cooling fans' operation after turning off the 
projector.
Normal
Normal cooling speed.
60 sec
Faster and louder than Normal, cooling time is 
shorter.
0 sec
Enable you directly unplug the AC power cord 
after turning off the projector, no need waiting for 
cooling.
 Note:  When it is set to "0 sec", you cannot restart the projector immediately after the power
-off. The 
  lamp remains high temperature and needs to be cooled, so it takes longer time than 
  usual for the lamp to light up again.
High land
Lamp control
Cooling fast
Setting
On start
Standby mode
High land
Lamp control
Cooling fast
Closed caption
Key lock
Iris
Terminal
Sound
HDMI Setup Off
Eco Off
Normal Off
On
Computer 2
Setting
On start
Standby mode
High land
Lamp control
Cooling fast
Closed caption
Key lock
Iris
Terminal
Sound
HDMI Setup Off
Eco Off
Normal Off
On
Computer 2
Setting
On start
Standby mode
High land
Lamp control
Cooling fast
Closed caption
Key lock
Iris
Terminal
Sound
HDMI Setup Off
Eco Off
Normal Off
On
Computer 2
High land
Lamp control Cooling fast