Eiki Projector Eip Wx5000 User Manual

29
Image Projection
Shifting the Lens
In addition to the zoom function and adjustment of projection angle using the adjust-
ment feet, you can adjust the position of the projection using the lens shift function.
This is a useful function in cases such as when the screen cannot be moved.
Adjustable range
• •• •
•The adjustable range is shown below.
Horizontal range: ±35%
Vertical range: ±66%
The adjustable range has limitations even within the range shown above.
Select the correct type of lens that match...

30
Using the Adjustment Feet
•When the position of the projected image cannot be adjusted
with the lens shift function, use the adjustment feet to adjust
the projected angle.
• The height of the projector can be adjusted using the
adjustment feet when the screen is located higher than the
projector, the screen is inclined or when the installation site
is slightly inclined.
• Install the projector so that it is as perpendicular to the
screen as possible.
1Rotate the adjustment feet to
adjust the projected...

31
Note
•After you have pressed  FOCUS or ZOOM
on the remote control or the projector, you
can display the test pattern by pressing
ENTER . The test pattern is useful for mak-
ing more accurate adjustments.
• For fine adjustments, when  H&V LENS
SHIFT , FOCUS  or  ZOOM  is pressed, the
projected image moves a small amount in
the desired direction for approximately one
second. Hold down the buttons to move the
projected image quickly.
Adjusting the Focus
Press  FOCUS +/–  on the projector
or on the remote...

32
For correcting an image desig-
nating the corner of the pro-
jected image
F or correcting an image desig-
nating the horizontal or vertical
axes
F or correcting the image dis-
tortion which cannot be cor-
rected with “H&V KEY-
STONE”.
*Only when “H&V KEY-
STONE” is set to the values
other than “0”, “IMAGE
RESIZING” can be adjusted.
(This function cannot be used
when correcting with “GEO-
METRIC ADJUSTMENT”.)
GEOMETRIC
ADJUSTMENT
H&V KEYSTONE
IMAGE RESIZING
↑
↑
Selecting the Type of the
Correction...

33
Geometric Adjustment
Upper Left Upper Right Lower RightLower Left
GEOMETRIC ADJUSTMENT
1Press KEYSTONE  on the pro-
jector or on the remote control
repeatedly until “GEOMETRIC
ADJUSTMENT” is displayed.
2Press the buttons below to ad-
just the position, size or focus
of the projected image.
• Match screen’s four sides to green
test pattern.
• Pressing 
'
' '
'
' , 
"
" "
"
" , 
\
\ \
\
\  or 
|
| |
|
|  on the projector
or  H&V LENS SHIFT  on the remote
control...

34
Vertical Keystone Correction
(Adjustment with 
' / ")
Horizontal Keystone Correction 
(Adjustment with 
\ / |)
▼On-screen display
H&V KEYSTONE
1Press KEYSTONE on the pro-
jector or on the remote control
repeatedly until “H&V KEY-
STONE” is displayed.
•When the correction has already been
made with “GEOMETRIC ADJUST-
MENT”, the confirmation message for
resetting the correction before “H&V
KEYSTONE” is displayed, and then re-
set.
2Press ' or " to parallelize the
left and right sides of...

35
IMAGE RESIZING
(Adjustment with 
' / " / \ / |)5Press ', ", \ or | to correct
the image distortion.
6Press KEYSTONE to set the
position. 

36
Switching the Input
Mode
Select the appropriate input mode for the con-
nected equipment.
Press COMPUTER1/2 , DVI , HDMI ,
VIDEO  or  S-VIDEO  on the remote
control to select the input mode.
■ When you select the input mode with
INPUT  
P
P P
P
P /
R
R R
R
R  on the projector or 
P
P P
P
P /
R
R R
R
R  on
the remote control:
• When 
P
P P
P
P /
R
R R
R
R  is pressed, the Input list ap-
pears. While the Input list is displayed,
f ollow the procedure below to switch the
input mode.
– Press 
P
P P
P
P /...

37
×1 ×4 ×9 ×16 ×36 ×64×2×3
" On-screen display
Mouse/adjustment 
button ( '/" /\ /| )
MAGNIFY
(enlarge/reduce)
b
uttons
UNDO buttonRESIZE button
MUTE button
Turning Off the Sound
Temporarily
Press  MUTE  on the remote control
to temporarily turn off the sound.
Note
• Pressing  MUTE again will turn the sound back on.
Displaying an Enlarged
Portion of an Image
Graphs, tables and other portions of projected
images can be enlarged. This is helpful when
providing more detailed explanations....

38
Freezing a Moving
Image
1Press FREEZE  on the remote
control.
• The projected image is frozen.
2Press  FREEZE  again to return
to the moving image from the
currently connected equipment.
Selecting the Picture
Mode
Y ou can select the suitable picture mode for the
projected image, such as movie or video game.
Press  PICTURE MODE  on the re-
mote control.
• When pressing  PICTURE MODE , the picture
mode changes in order of
Note
• Press  UNDO  to return to the “STANDARD”
mode while the selected picture...