Eiki Projector EIP-UJT100 User Manual
Here you can view all the pages of manual Eiki Projector EIP-UJT100 User Manual. The Eiki manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 41
![Page 41
41
Timings
■ H Total: Use ◄► to adjust the horizontal total.
Use this function to adjust the clock frequency of pixel sampling (hori\
zontal pixel
frequency of the analog input source generated by the ADC). If you notice flickering or
vertical lines in the picture, it means that the pixel sampling frequency is insufficient. You
can use this function to adjust the frequency to achieve consistent pict\
ure quality.
■ H Start: Use ◄► to adjust the projected picture’s horizontal position.
If...](http://img.usermanuals.tech/thumb/1702/99974/w300_projector_manual_8841_d-40.png "Page 41
41
Timings
■ H Total: Use ◄► to adjust the horizontal total.
Use this function to adjust the clock frequency of pixel sampling (hori\
zontal pixel
frequency of the analog input source generated by the ADC). If you notice flickering or
vertical lines in the picture, it means that the pixel sampling frequency is insufficient. You
can use this function to adjust the frequency to achieve consistent pict\
ure quality.
■ H Start: Use ◄► to adjust the projected picture’s horizontal position.
If...")
41 Timings ■ H Total: Use ◄► to adjust the horizontal total. Use this function to adjust the clock frequency of pixel sampling (hori\ zontal pixel frequency of the analog input source generated by the ADC). If you notice flickering or vertical lines in the picture, it means that the pixel sampling frequency is insufficient. You can use this function to adjust the frequency to achieve consistent pict\ ure quality. ■ H Start: Use ◄► to adjust the projected picture’s horizontal position. If...
Page 42
42 OSD Operation-LAYOUT Overscan Some programs may display the edges of the image. Use this function to hide the edge by choosing one of the following two options. 5:4 4:3 16:10 16:9 Off Crop Zoom
Page 43
43 OffCrop Zoom 1.88 2.35 Letter Box Native Unscaled Main Select When you want to project PIP picture, use this function to specify the picture source for the PIP picture. This function is identical to Input Selection; for more information. PIP(Sub) Main Source Main HDMI HDBaseT VGAY/Pb/Pr RGBHV, Y/Pb/Pr 3G-SDI PIP (SUB) HDMI -vv v- HDBaseT - vv v- VGA vv --v Y/Pb/Pr vv - -v RGBHV, Y/Pb/Pr vv -- v 3G-SDI -- vv v Note: DVI-D(3D DVI) has not supported PIP. PIP Select Press ENTER to display available...
Page 44
![Page 44
44
PIP Position
Use this function to select the location of the PIP window to Top left, Top Right, Bottom
Left, Bottom Right, or Split L-R.
21
1
2
T op Left
1
2
Bottom Left
1
2
Bottom Right Split L-R
1
2
Top Right
PIP
If you wish to display PIP picture, you can make the configuration here. By choosing
"ON", you will see two windows on the projected picture; the larger one is the\
primary pic-
ture and the smaller one is the sub picture. By choosing "OFF", the PIP function will be dis-...](http://img.usermanuals.tech/thumb/1702/99974/w300_projector_manual_8841_d-43.png "Page 44
44
PIP Position
Use this function to select the location of the PIP window to Top left, Top Right, Bottom
Left, Bottom Right, or Split L-R.
21
1
2
T op Left
1
2
Bottom Left
1
2
Bottom Right Split L-R
1
2
Top Right
PIP
If you wish to display PIP picture, you can make the configuration here. By choosing
\"ON\", you will see two windows on the projected picture; the larger one is the\
primary pic-
ture and the smaller one is the sub picture. By choosing \"OFF\", the PIP function will be dis-...")
44 PIP Position Use this function to select the location of the PIP window to Top left, Top Right, Bottom Left, Bottom Right, or Split L-R. 21 1 2 T op Left 1 2 Bottom Left 1 2 Bottom Right Split L-R 1 2 Top Right PIP If you wish to display PIP picture, you can make the configuration here. By choosing "ON", you will see two windows on the projected picture; the larger one is the\ primary pic- ture and the smaller one is the sub picture. By choosing "OFF", the PIP function will be dis-...
Page 45
![Page 45
45
POWER
Default value is Normal.
■ ECO: The wattage of the lamp will be at 360W. If the surrounding environment is
sufficiently dark or if you do not require intense brightness, you can set the lamp to Eco
mode to prolong its usage life.
■ Normal: The wattage of the lamp will be at 465W. If the projection environment requires
brighter picture, you can set the lamp to Normal for the highest project\
ion brightness.
■ Custom Level: If the picture brightness at Eco mode is too dark for you and...](http://img.usermanuals.tech/thumb/1702/99974/w300_projector_manual_8841_d-44.png "Page 45
45
POWER
Default value is Normal.
■ ECO: The wattage of the lamp will be at 360W. If the surrounding environment is
sufficiently dark or if you do not require intense brightness, you can set the lamp to Eco
mode to prolong its usage life.
■ Normal: The wattage of the lamp will be at 465W. If the projection environment requires
brighter picture, you can set the lamp to Normal for the highest project\
ion brightness.
■ Custom Level: If the picture brightness at Eco mode is too dark for you and...")
45 POWER Default value is Normal. ■ ECO: The wattage of the lamp will be at 360W. If the surrounding environment is sufficiently dark or if you do not require intense brightness, you can set the lamp to Eco mode to prolong its usage life. ■ Normal: The wattage of the lamp will be at 465W. If the projection environment requires brighter picture, you can set the lamp to Normal for the highest project\ ion brightness. ■ Custom Level: If the picture brightness at Eco mode is too dark for you and...
Page 46
![Page 46
46
Lamp 1 Status
Displays the Lamp 1 status.
Lamp 2 Status
Displays the Lamp 2 status.
Lamp1 Run Time
This function is limited to display purposes to inform the user of Lamp1\
's total run time.
Lamp2 Run Time
This function is limited to display purposes to inform the user of Lamp2\
's total run time.Note :
You can choose to use one single lamp. The projector will automatically determine the usage hours
for lamp1 and lamp2 and choose the lamp with lower hours for the operati\
on.
OSD...](http://img.usermanuals.tech/thumb/1702/99974/w300_projector_manual_8841_d-45.png "Page 46
46
Lamp 1 Status
Displays the Lamp 1 status.
Lamp 2 Status
Displays the Lamp 2 status.
Lamp1 Run Time
This function is limited to display purposes to inform the user of Lamp1\
's total run time.
Lamp2 Run Time
This function is limited to display purposes to inform the user of Lamp2\
's total run time.Note :
You can choose to use one single lamp. The projector will automatically determine the usage hours
for lamp1 and lamp2 and choose the lamp with lower hours for the operati\
on.
OSD...")
46 Lamp 1 Status Displays the Lamp 1 status. Lamp 2 Status Displays the Lamp 2 status. Lamp1 Run Time This function is limited to display purposes to inform the user of Lamp1\ 's total run time. Lamp2 Run Time This function is limited to display purposes to inform the user of Lamp2\ 's total run time.Note : You can choose to use one single lamp. The projector will automatically determine the usage hours for lamp1 and lamp2 and choose the lamp with lower hours for the operati\ on. OSD...
Page 47
47 Rear Projection Default setting is Off Select "ON" when you set the projector to rear projection mode. Refer to Page 22 Ad- justing the Picture Orientation Ceiling Mode Default setting is Off When you have set up the projector for ceiling mode (hung from the ceiling in reverse), please set it to ON. For more information on different modes of projection, refer to Page 22 Adjusting the Picture Orientation Lens Control Use this function to display Lens Control window, press ◄, ►, ▲...
Page 48
![Page 48
48
Test Pattern
Select this function to display test pattern, press ◄ or ► once to display the last or next
pattern. To exit, press ► several times until the test patterns disappear.
Color Gamut
You can choose from the following color gamma to create different color presentation in
the projected picture.
■ Native: Choose this to apply the projector's native color gamut
■ EBU: Choose this to apply the EBU color gamut; it is primarily suited for in\
put devices
using PAL, 576i, 576p and so...](http://img.usermanuals.tech/thumb/1702/99974/w300_projector_manual_8841_d-47.png "Page 48
48
Test Pattern
Select this function to display test pattern, press ◄ or ► once to display the last or next
pattern. To exit, press ► several times until the test patterns disappear.
Color Gamut
You can choose from the following color gamma to create different color presentation in
the projected picture.
■ Native: Choose this to apply the projector's native color gamut
■ EBU: Choose this to apply the EBU color gamut; it is primarily suited for in\
put devices
using PAL, 576i, 576p and so...")
48 Test Pattern Select this function to display test pattern, press ◄ or ► once to display the last or next pattern. To exit, press ► several times until the test patterns disappear. Color Gamut You can choose from the following color gamma to create different color presentation in the projected picture. ■ Native: Choose this to apply the projector's native color gamut ■ EBU: Choose this to apply the EBU color gamut; it is primarily suited for in\ put devices using PAL, 576i, 576p and so...
Page 49
49 Warp Use this function to correct image distortion.Note: DVI-D(3D DVI) has not supported warp. ■ Keystone: Use ◄ or ► to correct horizontal distortion. Press▲ or ▼to correct vertical distortion. The adjustable value H: -350 ~ 300 V: -32 ~ 32 ■ Rotation: Press◄ or ►to rotate the projected image. The adjustable value is from -20 to 20. PPP -20 20 0 ■ Pincushion / Barrel: Use this function to correct pincushion or barrel distortion. The adjustable range is from -100 to 100 steps....
Page 50
50 (Corner Keystone) ■ Top Left Corner PICTUREPICTURE Press ▲▼◄►to correct top left corner image distortion. X: -192~192 Y: -120~120 ■ Top Right Corner Press ▲▼◄►to correct top right corner image distortion. PICTUREPICTURE X: -192~192 Y: -120~120 ■ Bottom Right Corner Press ▲▼◄►to bottom right corner image distortion. PICTUREPICTURE X: -192~192 Y: -120~120 ■ Bottom Left Corner Press ▲▼◄►to bottom left corner image distortion. PICTUREPICTURE X: -192~192...