Eiki Projector Eip 5000 User Manual

99
To AC socket
Power cord
ENTER button
MENU button
H&V LENS 
SHIFT
button STANDBY-ON button
Resetting the Lamp Timer
Reset the lamp timer after replacing the lamp.
Info
•
Make sure to reset the lamp timer only
when replacing the lamp. If you reset the
lamp timer and continue to use the same
lamp, this may cause the lamp to become
damaged or explode.
1Connect the power cord.
•Plug the power cord into the AC socket
of the projector.
2Reset the lamp timer.
For Lamp 1
• When you reset the timer for...

100
Computer Compatibility Chart
•Multiple signal support
Horizontal Frequency: 15–126 kHz
Vertical Frequency: 43–200 Hz
Pixel Clock: 12–230 MHz
Sync signal: Compatible with TTL level
Computer
PC/
MAC/ WSHorizontal Frequency (kHz) Vertical 
Frequency (Hz)
PC
1,152  864
1,280 
 720
1,280 
 768
1,280 
 800
1,360 
 768
1,366 
 768
1,152 
 882
1,280 
1,024
1,400 
1,050 VESA 
Standard
Resolution Display DVI
Support
PC/
MAC/ WS
Advanced Intelligent 
Compression
Advanced Intelligent 
Compression
54.3 60
67.5...

101
Note
•Depending on the notebook computer, the image cannot be displayed or noise may appear in simulta-
neous (CRT/LCD) mode. In this case, turn off the LCD display on the notebook computer. For more
details, refer to the owner’s manual of the notebook computer.
• When this projector receives 640  × 350 VESA format VGA signals, “640  × 400” appears on the screen.
• When projecting the RGB interlace signal using INPUT 1/2 with “Signal Type” set to “Auto” or “RGB”, the
image may not be projected as...

102
Troubleshooting
Check
•Projector power cord is not plugged into the wall outlet.
•Power to the external connected devices is off.
•The selected input mode is wrong.
•Cables incorrectly connected to side panel of the projector.
•Remote control batteries have run out.
•External output has not been set when connecting notebook computer.
•Cables incorrectly connected to the side panel of the projector.
•“Bright” is set to minimum position.
• The “BLACK SCREEN” function is working.
•Image adjustments are...

103
CheckProblemPage
All buttons on the
projector and the remote control are unavailable.
Picture is green on INPUT 1or 2
(COMPONENT).
Picture is pink (no green)on INPUT 1, 2 or 3
(RGB).
Picture is too bright and
whitish.
The cooling fan
becomes noisy.
The lamp does not light up even after the
projector turns on.
The lamp suddenly turns
off during projection.
The image sometimes flickers.
The lamps take a long
time to turn on.
Picture is dark.
The remote control cannot be used. •
If the “Stack Setting”...

104
Specifications
DLP® Projector
EIP-5000/EIP-5000L
NTSC3.58/NTSC4.43/PAL/PAL-M/PAL-N/PAL-60/SECAM/
DTV480 I/DTV480P/DTV540P/DTV576 I/DTV576P/DTV720P/DTV1035 I/DTV1080 I
0.7 DLP
® chip  × 1
No. of dots:  786,432 dots (1,024 [H]  × 768 [V])
1.2  × electric zoom/focus lens, F1.8–F2.0, f = 25.6–31.3 mm (standard \
equipment with EIP- 5000)
260 W  × 2
15-pin mini D-sub connector
Y: 1.0 Vp-p, sync negative, 75  Ω terminated
P
B: 0.7 Vp-p, 75  Ω terminated
P
R: 0.7 Vp-p, 75  Ω terminated
750 TV lines...

105
Glossary
Advanced intelligent compression (Page 100)
High quality resizing of lower and higher resolu-
tion images to fit the projector’s native resolution.
Aspect ratio (Page 48)
Width and height ratio of an image. The normal
aspect ratio of a computer and video image is 4:3.
There are also wide images with an aspect ratio
of 16:9 and 21:9.
Auto Sync (Page 70)
Optimizes projected computer images by auto-
matically adjusting certain characteristics.
Background (Page 77)
Initial setting image...

106
Index
AC socket...................................................................... 37
ADJ./MOUSE switch ..................................................... 18
Adjustment buttons ........................................................ 56
Adjustment feet .............................................................. 39
Advanced intelligent compression ..............................100
All Reset ........................................................................\
 91
Aspect ratio...

U.S.A.
EIKI International, Inc.
30251 Esperanza
Rancho Santa Margarita
CA 92688-2132
U.S.A.
Tel : 800-242-3454 (949)-457-0200
Fax : 800-457-3454 (949)-457-7878
E-Mail : [email protected]
Japan & Worldwide
EIKI Industrial Company Limited.
4-12 Banzai-Cho, Kita-Ku, Osaka,
530-0028 Japan
Tel : +81-6-6311-9479
Fax : +81-6-6311-8486
WorldWide Website  http://www.eiki.com
China
EIKI (Shanghai) Co.,LTD
1. Dapu Road, Golden Magnolia Plaza
#2109 Shanghai, 
200023 China 
Te l :  
86-21-5396-0088
Fax : 86-21-5396-0318...