Eiki Projector Eip 5000 User Manual

89
DHCP Client Setting
Connect the LAN cable before turning the pro-
jector on. If not, the DHCP Client function does
not work.
Menu operation  Page 58
Example: “Options (2)” screen menu
Description of DHCP Client
Note
•Select “ON” for “DHCP Client”. “Obtaining IP
Address...” appears, then the message “The
network settings have been changed.”, IP Address,
Subnet Mask and Gateway will be displayed.
• If the DHCP server is not available, “Could not
obtain IP Address.” appears.
In this case, set the TCP/IP...

90
Description
Factory default setting:
192.168.150.002
Enter an IP address appropriate for the
network.
Factory default setting:
255.255.255.000
Set the subnet mask to the same as that
of the computer and equipment on the
network.
Factory default setting:
000. 000. 000. 000
* When not in use, set to:
  “000. 000. 000. 000”.
Selectable items
IP Address
Subnet Mask
Gateway
Description of TCP/IP
Note
• Before setting “TCP/IP”, select “OFF” for “DHCP
Client”.
• Confirm the existing network’s segment (IP...

91
Returning to the Default
Settings
This function allows you to initialize the settings
you have made in the projector.
Menu operation  Page 56
Example: “Options (2)” screen menu
Note
About the network settings
•“IP Address”, “Subnet Mask”, “Gateway”  and
other network setting items are initialized.
The following items or menu cannot be initialized.
• “C. M. S.” menu
“Lightness”, “Chroma” and “Hue” respectively
saved for Custom 1-3 on the “C.M.S.” menu.
• “Fine Sync” menu
Special Modes
• “Options (1)”...

92
Selecting the On-screen
Display Language
The projector can switch the on-screen display
language among 11 languages: English, German,
Spanish, Dutch, French, Italian, Swedish, Portu-
guese, Chinese, Korean or Japanese.
Menu operation  Page 58
Example: “Language” screen menu
Using the Other Menus (“Language” and “Status” menus)
Overview of All Menu Set-
tings
This function can be used to display all the ad-
justed settings as a list on the screen.
Menu operation  Page 56
Example: “Status” screen menu 

93
Cleaning the air vents and the intake vent cover
■Use a vacuum cleaner to clean dust from the ex-
haust vent, the intake vents and the intake vent
cover (on the bottom of the projector).
Info
•If you want to clean the air vents and the intake
vent cover during  projector operation,  ensure
you press 
 on the projector or  on the
remote control and put the projector into standby
mode. After the cooling fan has stopped, unplug
the power cord from the AC socket and clean
the air vents and the intake vent...

94
Power indicator
Lamp indicators 1, 2
Temperature warning indicator
Maintenance Indicators
Maintenance Indicators
■The warning lights on the projector indicate problems inside the project\
or.
■ If a problem occurs, either the temperature warning indicator or the lam\
p indicator will illuminate
red, and the projector will enter the standby mode. After the projector has entered the standby
mode, follow the procedures given below.
About the temperature warning indicator
If the temperature inside the...

95
Maintenance indicatorProblemCause Possible solution
Temperature warning
indicator Normal
Abnormal
Off Red on
(Standby) The internal
temperature is
abnormally high.
Abnormal
•
 Blocked air intake •
Relocate the projector to an area
with proper ventilation. (See page
9.)
• Cooling fan break-
down
• Internal circuit failure
• Clogged air intake
• Clogged intake vent
cover •
Take the projector to your nearest
EIKI Authorized Dealer or Service
Center for repair.
• Clean the air vents and the intake
vent...

96
Lamp
■It is recommended that the lamp units  (optional: AH-50001 and AH-50002)  be replaced when the re-
maining lamp life becomes 5% or less, or when you notice a significant d\
eterioration in the picture
and color quality. The lamp life (percentage) can be checked with the on-screen display\
. See page  83.
■ Purchase a replacement lamp unit of type AH-50001 and AH-50002 from your place of purchase,
nearest EIKI Authorized Dealer or Service Center.
Hg LAMP CONTAINS MERCURY For State Lamp Disposal...

97
Optional
accessories
Lamp unit 1
AH-50001Removing and Installing
the Lamp Unit
Info
• Make sure that you remove the lamp unit
by the handle. Do not touch the glass sur-
face of the lamp unit or the inside of the
projector.
• To avoid injury to yourself and damage to
the lamp, make sure you carefully follow
the steps below.
• Do not loosen other screws except for the
lamp unit cover and lamp unit.
(Only the silver screws are loosened.)
1Press  on the projector or
 on the remote control to put
the...

98
4Remove the lamp unit.
•Loosen the securing screws (two for
each lamp) from the lamp unit. Hold the
lamp unit by the handle and pull it in the
direction of the arrow. At this time, keep
the lamp unit horizontal and do not tilt it.
5Insert the new lamp unit.
•Press the lamp unit firmly into the lamp
unit compartment. Fasten the securing
screws.
• Be sure that AH-50001 and AH-50002
are respective type.
6Replace the lamp unit cover.
•Align the lamp unit cover and slide it to
close. Then tighten the user...