Eiki Lc-Xip2000 Multimedia Projector Owners Manual

							Installation(contiuned)
Software and Hardware install 
 
2.Section two : Software and Hardware driver installation
Step 7: Install 
30  
						

							Installation(contiuned)
Software and Hardware install 
 
2.Section two : Software and Hardware driver installation
Step 8: Continue Anyway 
31 NOTE: We confirmed that installation of this software will not impair or destabilize 
the correct operation of your system.
  
						

							Installation(contiuned)
Software and Hardware install 
 
2.Section two : Software and Hardware driver installation
Step 9: Finish 
32  
						

							Installation(contiuned)
Software and Hardware install 
 
2.Section two : Software and Hardware driver installation
Step 10-A: Turning on the projector  POWER 
Remove the lens cover. 
Connect the projector’s power cable with the projector, and insert 
the power cable into a wall socket. 
Turn on the AC power switch of the projector.The power indicator 
lights 
green and slowflashing. Projector works in standby mode. 
Press the power button to turn on the projector. The power LED 
begins to green and lamp LED begins to red, and the projector
 will 
be
 lamped on. 
33
  
						

							 
Installation(contiuned)
Software and Hardware install 
 
2.Section two : Software and Hardware driver installation
Step 10-B: Turning on the projector 
WARNINGIf no image are projected, change the input signal.
POWER LAMP 
A 
KEYSTONE 
INPUT 
BLANK 
When using a laptop or a PC with an in built monitor, select external 
video 
output on the computer. 
34  
						

							Installation(contiuned)
Software and Hardware install 
 
2.Section two : Software and Hardware driver installation 
Step 11: Connecting PC to the projector 
To connect Computer cable (RGB) first then USB cable.
Computer in 1 or Computer in 2 
USB cable 
Computer cable 
To Computer monitor port 
35
 
 
  
 
Mouse port 
USB port  
						

							Installation(contiuned)
Software and Hardware install 
 
2.Section two : Software and Hardware driver installation
Step12：Select “No, not this time” than “Next” 
36  
						

							Installation(contiuned)
Software and Hardware install 
 
2.Section two : Software and Hardware driver installation
Step13: Next 
37 
						

							NOTE: We confirmed that installation of this software will not impair or destabilize 
the correct operation of your system.
 
Installation(contiuned)
Software and Hardware install 
 
2.Section two : Software and Hardware driver installation
Step14: Continue Anyway 
Step15: Finish
“LightPen” shortcut will be added on the window 
desktop automatically. 
38  
						

							Installation(contiuned)
3.Section three: Functional key of “Pointer”
Button：Mouse left key
39 LED lamp