Eiki Lc-Xip2000 Multimedia Projector Owners Manual

Installation(contiuned)
4.Section four: Calibration
Step 1: Execute “LightPen” shortcut
desktop. on the Windows
Step 2: Select 
“LightPen” from toolbar then click mouse right
key for Calibration. 
40  

Installation(contiuned)
4.Section four: Calibration
Step 3: P u s h  t h e  bu tt on  of “Pointer” and point to the 
“center of green cross target” from upper-left of screen 
to lower-right of screen orderly. There are nine targets 
totally. No more green target on the screen means you’ve 
completed the calibration procedure. To keep the angle 
of “Pointer” as constant as possible durin
g the calibration
for more accurate positioning. 
41
      

Installation(contiuned)
4.Section four: Calibration
How to play function of “Mouse right key”? 
Point to top or down of screen outside than push the
button of “Pointer”. 
42  

 
Installation(contiuned)
4.Section four: Calibration
There is another quick way to change the position of icon or
hide it. 
Point to left or right of screen outside then push the button 
of “Pointer”. 
43 

Installation(contiuned)
5.Section five: Function of icon
Icon position 
P u s h  t h e  b u t t o n  o f  “ P o i n t e r ”  t o  s e l e c t  i c o n ’ s p o s i t i o n 
on either the right-side or left-side of screen. 
Mouse
Pen
Eraser
Select
 the fineness of pen
Select
 the color of pen 
Erase all
Save
 files
Redraw
Virtual
 keyboard
44  

How to Connect
Desktop PC 
Before starting, make sure that the projector and computers are both 
turned off. 
1. Connect the computer cable. 
Connect either end of the computer cable to the projector’s Computer 
in 1 or Computer in 2 
Disconnect
 the monitor cable from the computer and connect the
other
 end of the terminal where the monitor cable is disconnected
from
 the computer. 
If needed, connect the monitor cable of the computer monitor to 
the
 projector’s Monitor Out. 
Tighten the screw on all...

How to Connect
Laptop PC 
Before beginning, make sure that the projector and computers are both 
turned
 off. 
1. Connect the computer cable. 
Connect either end of the computer cable to the projector’s Computer 
in 1.  
Connect the other end of the project cable to the monitor out 
connection
 on the laptop. 
Tighten the all connectors. 
2. Connect the audio cable if necessary. 
Connect one end of the audio cable to the Audio in jack on the 
projector.  
Connect the other end of the audio cable to the...

How to Connect
Video 
 
1. Connect to a video source 
The Projector can receive composite AV ,YPbPr and S-Video. 
Connect RCA plug at projector and video source ( like DVD 
player) for video signal. Please contact with your dealer for 
optional cable. 
2. Connect RCA plug ( white and red) to audio source ( like DVD 
player) and connect the phone jack to projector for audio 
signal. 
47
 
  

 
How to Connect
Video 
 
3. Connect YPbPr plug at projector computer in 2 port and video 
source
 ( like DVD player) for video signal.  
4. For S-Video, using S-Video cable connect to projector and 
video source for video signal. 
48  

Basic Operation
Turning on the projector - Procedure 
 
1. Check the power is turned off for the projector and all components 
connected to the projector. 
2. Remove the lens cover. 
3. Connect the power cord to the projector. 
4. Turn on the power switch. 
5. Press thebutton on the control panel or [POWER] button on 
the remote control.
2
1
5
3
KEYSTONE 
INPUT 4BLANK 
49
A