Eiki Lc-Xg400 Multimedia Projector Owners Manual

41

Press the MENU button to display the On-Screen 
Menu. Use the Point 7 8 buttons to move the red 
frame pointer to the Image Menu icon.
1
2Use the Point ed buttons to move the red frame 
pointer to the desired image level and then press the 
SELECT button.Move the red frame pointer 
to the desired image level and 
press the SELECT button.
The selected image level is check marked.
Image Menu
Normal picture mode preset on the projector.
Standard
Picture mode with improved halftone for graphics.
(This...

4
Press the MENU button to display the On-Screen 
Menu. Use the Point 7 8 buttons to move the red 
frame pointer to the Image Adjust Menu icon.
1
2Use the Point ed buttons to move the red frame 
pointer to the desired item and then press the SELECT 
button to display the adjustment dialog box. Use the 
Point 7 8 buttons to adjust the setting value.
Press the Point 7 button to decrease the contrast; press the 
Point 8 button to increase the contrast (from 0 to 63).
Press  the  Point 7  button  to...

4
Use the Point 7 8 buttons to adjust the gamma value to 
obtain a better balance of contrast (from 0 to 15).
Gamma
Press the Point 7 button to decrease the sharpness of the 
image; press the Point 8 button to increase the sharpness 
of the image (from 0 to 15).
Sharpness
✔Notes:	
	 •	Noise	reduction	and	Progressive	cannot	be	selected	 when	480p,	575p,	720p,	1035i,	or	1080i	is	selected	
(p.36).
	 •	Reset	and	Store	icons	will	be	displayed	when	more	 than	one	adjustment	is	made.
An interlaced video...

44
To store the adjusted data, select Store and press the 
SELECT button. Use the Point ed buttons to select 
one from Image 1 to 4 and press the SELECT button. A 
confirmation box appears and then select [Yes]. Stored data 
can be called up by selecting an “Image (1–4)” in the Image 
Level Selection on page 41.
To reset the adjusted data, select Reset and press the 
SELECT button. A confirmation box appears and then select 
[Yes]. All adjustments will return to their previous figures. 
Reset
Store
Exit...

45

Press the MENU button to display the On-Screen 
Menu. Use the Point 7 8 buttons to move the red 
frame pointer to the Screen Menu icon.
1
Use the Point ed buttons to move the red frame  
pointer to the desired function and then press the 
SELECT button.
2
Screen	Adjustment
Move the red frame pointer 
to the desired function and 
press the SELECT button.
Screen Menu
Screen Menu icon
Keystone
This function is used to store or reset the keystone 
correction when the AC power cord is unplugged. Use the...

46

Wide
Provide the image to fit the screen size.
Normal
True
Provide the image in its original size. When the original 
image size is larger than the screen size (1024 x 768), the 
projector enters to the panning mode automatically. Use the 
Point ed7 8 buttons to pan the image. When adjusted, the 
arrows will turn red. When reached to the correction limits, 
the arrows will disappear.
Provide the image to fit the wide video aspect ratio (16:9) by 
expanding the image width uniformly. This function...

47

Select Digital zoom +. The On-Screen Menu disappears and 
“D. zoom +”appears. Press the SELECT button to expand 
the image size. Use the Point ed7 8 buttons to pan the 
image. The Panning function can work only when the image 
is larger than the screen size.
You can also enter the Digital zoom + mode by pressing the 
D.ZOOM button on the remote control.
To exit the Digital zoom +/– mode, press any button except 
the D.ZOOM, SELECT, and Point buttons.
To return to the previous screen size, select a...

48

Screen	Size	Adjustment	(Video,	Component	Signals)
Press the MENU button to display the On-Screen 
Menu. Use the Point 7 8 buttons to move the red 
frame pointer to the Screen Menu icon.
1
Use the Point ed buttons to move the red frame  
pointer to the desired function and then press the 
SELECT button.
2
Provide the image at the 4:3 normal video aspect ratio.
Normal
Wide
Provide the image at the 16:9 wide screen ratio.
Move the red frame pointer 
to the desired function and 
press the SELECT...

49

Press the MENU button to display the On-Screen 
Menu. Use the Point 7 8 buttons to move the red 
frame pointer to the Setting Menu icon.
1
2
Language
The language used in the On-Screen Menu is available 
in English, German, French, Italian, Spanish, Portuguese, 
Dutch, Swedish, Russian, Chinese, Korean, and Japanese.
Use the Point ed buttons to move the red frame 
pointer to the desired item and then press the SELECT 
button. The Setting dialog box appears.
Press the SELECT 
button at Language,...

50

Capture
This function enables you to capture an image being 
projected to use it for a starting-up display or interval of 
presentations.
Select Capture and press the SELECT button.  
A confirmation box appears and select [Yes] to capture the 
projected image.
After capturing the projected image, go to the Logo select 
function and set it to “User”. Then the captured image will 
be displayed the next time you turn on the projector or 
when you press the NO SHOW button (see page 31).
To cancel the...