Eiki Lc-Xg400 Multimedia Projector Owners Manual

1

Press the NO SHOW button on the remote control to black 
out the image. To restore to normal, press the NO SHOW 
button again or press any other button.
“No show” disappears after 4 seconds.
NO SHOW button
Press the P-TIMER button on the remote control. The P-Timer 
display “00:00” appears on the screen and the countdown 
starts (00:00–59:59).
To stop the countdown, press the P-TIMER button. To cancel 
the P-Timer function, press the P-TIMER button again.
P-TIMER button
P-Timer display
✔Note:...


Spotlight
Pointer	Function
Pointer
✔Note:
	 •	You	can	choose	the	size	of	Spotlight	(Large/Middle/ Small)	and	the	pattern	of	Pointer	(Arrow/Finger/Dot)	
in	the	Setting	Menu.	See	 “Pointer”	on	page	49.
This remote control emits a laser beam from the laser light window. Press the LASER button to activate the 
laser pointer. The signal emission indicator lights red and the red laser beam is emitted. If the LASER button is 
pressed for more than one minute or if it is released, the laser light...


Move the pointer on the screen 
with this button. 
PRESENTATION POINTER 
button
R-CLICK button
L-CLICK button
Acts as right (click) mouse 
button while the projector and a 
computer are connected with a 
USB cable.
Acts as left (click) mouse 
button while the projector 
and a computer are 
connected with a USB 
cable.
Wireless	Mouse	Operation
The remote control can be used as a wireless mouse for your computer. 
Before operating the wireless mouse, connect 
your computer and the projector...

4
Remote Control
INPUT buttons
Top Control
Input	
Press the INPUT 1, INPUT 2, or INPUT 3 buttons on the 
remote control. The input source appears on the screen as 
you press each button. Select the connected input source.
Remote Control Operation
INPUT button
Press the INPUT button on the top control. It switches to 
INPUT 1, INPUT 2, and INPUT 3 as you press the INPUT 
button. 
Before using the INPUT button on the top control, you must 
select a correct input source by On-Screen Menu and the...

5
Press the MENU button to display the On-Screen 
Menu. Use the Point 7 8 buttons to move the red 
frame pointer to the Input Menu icon.
1
Use the Point ed buttons to move the red arrow 
pointer to the desired input and then press the 
SELECT button. The signal format menu appears.
2
Use the Point ed buttons to select the desired signal 
format and then press the SELECT button.3
Menu Operation
When the RGB PC (analog) signal is 
connectedRGB (PC analog)
INPUT 1
When the RGB PC (digital) signal is...

6
Press  the  MENU  button  to  display  the  On-Screen 
Menu.  Use  the  Point 7  8  buttons  to  move  the  red 
frame pointer to the AV System Menu icon.
1
Video	System	Selection
AV System Menu (Video or S-Video)
AV System Menu (Component)
Use  the  Point ed  buttons  to  move  the  red  arrow 
pointer  to  the  desired  system  and  then  press  the 
SELECT button.
2
If the projector cannot reproduce proper video image, 
select a specific broadcast signal format from among PAL, 
SECAM, NTSC,...

7

The Auto PC Adjustment 
function operates to adjust 
the projector. 
PC System Menu
The PC System Menu icon 
 Selected system is    
  displayed.
Systems in this dialog box 
can be selected.
Press the MENU button to display the On-Screen 
Menu. Use the Point 7 8 buttons to move the red 
frame pointer to the PC System Menu icon.
Use the Point ed buttons to move the red arrow 
pointer to the desired system and then press the 
SELECT button.  
1
2
Custom Mode (1–10) set in the 
PC Adjust Menu...

8

Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal and Vertical 
positions to conform to your computer.
Move the red frame pointer to Auto 
PC Adj. and press the SELECT button.
“Please wait...” appears while the 
Auto PC adjustment is in process.
PC Adjust Menu
PC Adjust Menu icon
To store adjustment parameters
The adjusted parameters from the Auto PC Adjustment can 
be stored in the projector. Once the parameters are stored, 
the setting can be...

9

Press the MENU button to display the On-Screen 
Menu. Use the Point 7 8 buttons to move the red 
frame pointer to the PC Adjust Menu icon.
1
2Use the Point ed buttons to move the red frame 
pointer to the desired item and then press the SELECT 
button to display the adjustment dialog box. Use the 
Point 7 8 buttons to adjust the setting value.Move the red frame pointer 
to the desired item and 
press the SELECT button.
PC Adjust Menu
PC Adjust Menu icon
Use the Point 7 8 buttons to adjust the...

40

Use the Point 7 8 buttons to adjust the horizontal area 
displayed by this projector.
Display area H
Use the Point 7 8 buttons to adjust the vertical area 
displayed by this projector.
Display area V
Reset
Store
Exit the PC Adjust Menu.
Quit
To store the adjusted data, select Store and then press the 
SELECT button. Move the red arrow pointer to one of the 
Modes 1 to 10 in which you want to store, and then press 
the SELECT button.
To reset the adjusted data, select Reset and press the 
SELECT...