Eiki Lc-Xg300l Multimedia Projector Quick Reference Guide

							- 11 -
English
qSTAND-BY button
Turn the projector off.
tON button
Turn the projector on.
yINPUT 1 – 3 buttons
Select a input source (INPUT 1 – INPUT 3).
uAUTO PC button
Automatically adjusts the computer image to its optimum
setting.
iFREEZE button
Freeze the picture on the screen.
oPoint ed 7 8( VOLUME + / –
) buttons
–Select an item or adjust the value in the On-Screen
Menu.
–Pan the image in Digital zoom + mode.
–Adjust the volume level (with Point 
7 8buttons).
Remote Control
!2L-Click button
Acts as left mouse button for wireless mouse operation.
eSignal Emission indicator
Lights red while the laser beam is being emitted from the
laser light window or a signal is being sent from the
remote control to the projector.!0Presentaion Pointer button
Move a pointer of the projector or a pointer for wireless
mouse operation.
To ensure safe operation, observe the
following precautions:
–Do not bend, drop, or expose the remote control to
moisture or heat.
–For cleaning, 
use a soft dry cloth. Do not apply benzene,
thinner, splay, or any other chemical materials.
wWired Remote jack
Connect the remote control cable (not supplied) to this
jack when using as a wired remote control.
!1INFO. button
Display the input source information.rLaser Light window
A laser beam is emitted from here.
o
t
y
r
!0
u
i
!1
qe
!2
w 
						

							- 12 -
Remote Control
!3MENU button
Open or close the On-Screen Menu.
!6ZOOM edbuttons
Zoom in and out the images.
!5D.ZOOM button
Select the Digital zoom +/- mode and resize the image.
@0FOCUS button
Adjust the focus.
!8
MUTE button
Mute the sound.
!4
P-TIMER button
Operate the P-timer function.@1
NO SHOW button
Temporarily turn off the image on the screen.
@2
KEYSTONE button
Correct keystone distortion.
@6SELECT button
–Execute the selected item.
–Expand or compress the image in the Digital zoom
mode.
!7LASER button
–Operate the Laser pointer function. Laser beam is
emitted while pressing this button for one minute.
When using the laser pointer for more than one minute,
release the LASER button and press it again.
–Display the Pointer on the screen.
!9RESET/ON/ALL-OFF switch
When using the remote control, set this switch to “ON.”
Set it to “ALL OFF” for power saving when it is not in use.
Slide this switch to “RESET” to initialize the remote control
code or switch the Spotlight and Pointer to the Laser
pointer function.
@5R-click button
Acts as right mouse button for wireless mouse
operation.
@3
LENS SHIFT button
Select the Lens Shift function.
@4SCREEN button
Select the screen size.
@7Number buttons
Act as number buttons. Use these buttons when setting
the remote control codes or when entering the PIN code
numbers.
!9
!5
!3
!4
!8
!6
!7
@0
@6
@7
@3
@2
@1
@4
@5
For PIN code
and remote
control code. 
						

							- 13 -
English
Projection angle can be adjusted up to 5.0 degrees with the
adjustable feet. 
Rotate the adjustable feet and tilt the projector to the proper
height; to raise the projector, rotate the both feet clockwise.
To lower the projector or to retract the adjustable feet,
rotate the both feet counterclockwise.
To correct keystone distortion, press the KEYSTONE button
on the remote control or select Keystone from the menu.
Adjustable Feet
To insure safe operation, please observe the following precautions :
●Use two (2) AAA or LR03 type alkaline batteries.
●Always replace batteries in sets.
●Do not use a new battery with a used battery.
●Avoid contact with water or liquid.
●Do not expose the remote control to moisture or heat.
●Do not drop the remote control.
●If the battery has leaked on the remote control, carefully wipe the case clean and install new
batteries.
●Risk of an explosion if battery is replaced by an incorrect type. 
●Dispose of used batteries according to the instructions.
Press the lid
downward and slide it.
Open the battery
compartment lid.Install new batteries
into the compartment.Replace the
compartment lid.
Two AAA size batteries
For correct polarity (+ and –),
be sure battery terminals are
in contact with pins in the
compartment.
12 3
Point the remote control toward the projector (to Infrared
Remote Receivers) when pressing the buttons. Maximum
operating range for the remote control is about 16.4’ (5 m)
and 60 degrees in front and rear of the projector.
Infrared Remote Receivers are provided both in front and
back of the projector. You can conveniently use both of the
receivers.16.4’
(5 m)
60°
Remote Control Receivers and Operating Range Remote Control Battery Installation
60°
Adjustable Feet 
						

							- 14 -
When replacing the lens or using an optional lens, install the lens by following the instructions below. Ask the
sales dealer for detailed information of the optional lens specifications. 
Fit the lens to the projector by aligning the red dot
on the lens with the red dot of the projector. Remove the lens mount cover.
1
2
Attaching the lens to the projector
Slowly turn the lens clockwise until it clicks. Make
sure that the lens is fully inserted to the projector.3
While pressing the Lens release button on the top
of the cabinet, turn the lens counterclockwise
until it stops and pull it out slowly from the
projector. Shift the lens to the center position by using the
Lens shift function.
1
2
Removing the lens
CAUTION
Do not press the lens release button when
attaching the lens. 
CAUTION
Be careful when handling the lens. Do not
drop.
Lens Installation
Lens Release button
Red dot 
						

							- 15 -
English
✔Notes:
•The brightness in the room has a great influence on picture quality. It is recommended to limit ambient lighting in order to obtain
the best image.
•All measurements are approximate and may vary from the actual sizes.
For projector positioning, see the figures below. The projector should be set perpendicularly to the plane of the
screen.
100”32.8 (10.0m)
22.0 (6.7m)
16.4 (5.0m)
10.8 (3.3m)
3.9 (1.2m)
150”200”300”
230”
155”
11 6 ”
78”
30”
Max. Zoom
Min. Zoom
Screen Size
(W x H) mm
4:3 aspect ratio
Zoom (min.)
30”
Zoom (max.)
610 x 457
3.9’ (1.2 m)
–––––100”
2032 x 1524
14.1’ (4.3 m)
10.8’ (3.3 m)150”
3048 x 2286
21.3’ (6.5 m)
16.4’ (5.0 m)200”
4064 x 3048
28.5’ (8.7 m)
22.0’ (6.7 m)300”
6096 x 4572 
–––––
32.8’ (10.0 m)
(Inch Diagonal)
(Center)
15%15%
50%
50%
uppermost downmost
leftmost rightmost
Moving the Lens
The amount of lens shift range varies depending on the lens. The figures below are for LC-XG300/XG250.
Positioning the Projector (for LC-XG300/XG250) 
						

							- 16 -
This projector uses nominal input voltages of 100–120 V or
200–240 V AC and it automatically selects the correct input
voltage. It is designed to work with single-phase power
systems having a grounded neutral conductor. To reduce the
risk of electrical shock, do not plug into any other type of
power system.
If you are not sure of the type of power being supplied,
consult your authorized dealer or service station.
Connect the projector with all peripheral equipment before
turning the projector on.
CAUTION
For safety, unplug the AC power cord when the projector
is not in use. When the projector is connected to an outlet
with the AC power cord, it is in stand-by mode and
consumes a little electric power.
Connecting the AC Power Cord
Connect the AC power cord (supplied) to the
projector.
The AC outlet must be near this equipment
and must be easily accessible.
NOTE ON POWER CORD
AC power cord must meet the requirements of the country where you use the projector.
Confirm the AC plug type with the chart below and a proper AC power cord must be used.
If the supplied AC power cord does not match your AC outlet, contact your sales dealer.
To POWER CORD
CONNECTOR on your
projector.
Projector sideAC Outlet side
Ground
To the AC Outlet.(120 V AC)
For Continental EuropeFor the U.S.A. and Canada
To the AC Outlet.(200 - 240 V AC) 
						

							- 17 -
English
Connecting to a Computer (Digital and Analog RGB)
Cables used for connection 
• VGA Cable (HDB 15 pin)* • USB Cable
• DVI-Digital Cable • Audio Cables (Mini Plug [stereo] x 2)
• BNC Cable
(*One cable is supplied; other cables are not supplied with the project\
or.)
External Audio Equipment
DVI-Digital
cable USB
cable
Audio
cable
(stereo)
Audio cable
(stereo)
USB port
Audio
Output
USB
AUDIO OUT
(stereo)Audio Input
Unplug the power cords of both the projector and external
equipment from the AC outlet before connecting cables.
✔
Notes:
• When connecting the AUDIO OUT to external audio equipment,
the projector’s built-in speaker is disconnected.
• USB cable connection is needed when operating the computer with
the remote control.
Monitor
Output
DIGITAL (DVI-D)
VGA
cable Monitor
Output
Monitor Output
BNC
cableANALOG IN
Monitor
Input
VGA
cable ANALOG OUTG   B   R   H/V   V
AUDIO
IN 
						

							- 18 -
Connecting to Video Equipment (Video, S-Video)
Cables used for connection  
• Video Cables (RCA x 1) • Audio Cables (Mini Plug [stereo] x 2)
• S-VIDEO Cable • BNC Cable
• Audio Cable (RCA x 2)
(Cables are not supplied with the projector.)
External Audio Equipment
Audio cable
(stereo) VIDEO S-VIDEOS-video
cable Video and
audio cable Composite Video and Audio OutputS-video
Output
AUDIO INAudio Input
AUDIO OUT
(stereo) (R) (L) (Video)
Unplug the power cords of both the projector and external
equipment from the AC outlet before connecting cables.
AUDIO IN VIDEO(R) (L)
✔Notes:
•When connecting the AUDIO OUT to external audio equipment,
the projector’s built-in speaker is disconnected.
•The S-VIDEO jack connection overrides the VIDEO jack connection
when selecting AUTO in the Input Menu.
BNC
cableAudio
cable
(stereo) 
						

							- 19 -
English
Connecting to Video Equipment (Component and RGB Scart)
Cables used for connection
• Audio Cables (Mini Plug [stereo] x 2)
• Scart-VGA Cable
• BNC Cable
• DVI-Digital Cable
(Cables are not supplied with the projector.)
External Audio Equipment
Audio cable
(stereo) Audio Input Component Video
Output
(Y, Cb/Pb, Cr/Pr) RGB Scart 
21-pin InputAudio
Output
Scart-VGA
cable
AUDIO OUT
(stereo)
Audio
cable
(stereo)
AUDIO
IN ANALOG
OUT
Y   Cb/Pb   Cr/PrANALOG
IN Scart-VGA
cable BNC
cableDVI-Digital
cable RGB Scart 
21-pin OutputDigital Output
(HDCP
compatible)
DIGITAL
(DVI-D)
Unplug the power cords of both the projector and external
equipment from the AC outlet before connecting cables.
✔Notes:
•When connecting the AUDIO OUT to external audio equipment,
the projector’s built-in speaker is disconnected. 
						

							- 20 -
Connect the projector’s AC power cord into an AC
outlet. The POWER indicator lights green.
Press the ON/STAND-BY button on the top control or
the ON button on the remote control. The LAMP
indicator lights red and the cooling fans start to operate.
The preparation display appears on the screen and the
count down starts. 
2
3
1
The preparation display will disappear
after 30 seconds.
4After the countdown, the input source that was
selected the last time and the lamp control status icon
appear on the screen.
If the projector is locked with a PIN code, PIN code
input dialog box will appear. Enter the PIN code as
instructed below.Selected Input Source and Lamp Control
Complete peripheral connections (with a computer,
VCR, etc.) before turning on the projector.  
Lamp control status
What is PIN code?
PIN (Personal Identification Number) code is a security code
that allows the person who knows it to operate the
projector. Setting a PIN code prevents unauthorized use of
the projector.
After the OK icon disappears,
you can operate the projector.  
PIN Code Input Dialog Box
Turning On the Projector
Enter a PIN code
Use the Point edbuttons or Number buttons on the remote
control to enter a number. Press the Point 
8button to fix the
number and move the red frame pointer to the next box. The
number changes to “ ✳.” If you fixed an incorrect number,
use the Point 
7button to move the pointer to the number
you want to correct, and then enter the correct number.
Repeat this step to complete entering a four-digit number.
After entering the four-digit number, move the pointer to
“Set.” Press the SELECT button so that you can start to
operate the projector.
If you entered an incorrect PIN code, “PIN code” and the
number ( ✳✳✳✳) will turn red for a moment. Enter the correct
PIN code all over again.
CAUTION ON HANDLING PIN CODE
If you forget your PIN code, the projector can no
longer be started. Take a special care in setting a
new PIN code; write down the number and keep
it at hand. Should the PIN code be missing or
forgotten, consult your dealer or service center.
✔Notes:
• During the countdown period, all operations are
invalid.
• If the correct PIN code number is not entered
within three minutes after the PIN code dialog
box appeared, the projector will be turned off
automatically.
•T he “1234” is set as the initial PIN code at the
factory.
✔Note:
• The Filter warning and Lamp replacement icons
may appear on the screen depending on the
usage state of the projector.
16