Eiki Lc-Xg300l Multimedia Projector Quick Reference Guide

English
Deutsch
Français
Italiano
Español
(*Models without lens.)
Multimedia Projector 
Quick Reference Guide
MODELLC-XG300/LC-XG250
LC-XG300L
*/LC-XG250L*
Use this book as a reference guide when setting up the projector.
For detailed information about installation, setup, and operation of
the projector, refer to the owner’s manual on the CD-ROM.
READ THE SAFETY INSTRUCTIONS IN THE OWNER’S MANUAL
(CD-ROM) BEFORE USING THE PROJECTOR. 

- 2 -
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK). NO
USER-SERVICEABLE PARTS INSIDE EXCEPT
LAMP REPLACEMENT. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
THIS SYMBOL INDICATES THAT DANGEROUS
VOLTAGE CONSTITUTING A RISK OF ELECTRIC
SHOCK IS PRESENT WITHIN THIS UNIT.
THIS SYMBOL INDICATES THAT THERE ARE
IMPORTANT OPERATING AND MAINTENANCE
INSTRUCTIONS IN THE OWNERS MANUAL
WITH THIS UNIT.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Before installing and operating the...

- 3 -
English
All the safety and operating instructions should be read
before the product is operated.
Read all of the instructions given here and retain them for
later use. Unplug this projector from AC power supply
before cleaning. Do not use liquid or aerosol cleaners.
Use a damp cloth for cleaning.
Follow all warnings and instructions marked on the
projector.
For added protection to the projector during a lightning
storm, or when it is left unattended and unused for long
periods of time, unplug it...

- 4 -
Openings in the cabinet are provided for ventilation.
To ensure reliable operation of the product and to
protect it from overheating, these openings must not
be blocked or covered. 
CAUTION
Hot air is exhausted from the exhaust vent. When
using or installing the projector, the following
precautions should be taken. 
–Do not put any flammable object or spray can near
the projector, hot air is exhausted from the air
vents.
–Keep the exhaust vent at least 3’ (1 m) away from
any objects.
–Do not touch...

- 5 -
English10˚ 10˚
10˚10˚
Do not tilt the projector more than 10 degrees from side to side. 
In upward projection, do not tilt the projector over 10 degrees right and left.
Do not put the projector on either side to project an image. 
10˚
10˚
In downward projection, do not tilt the projector over 10 degrees right and left.
Use the projector properly in specified positions. Improper positioning may reduce the lamp life and result in
severe accident or fire hazard.
This projector can project the picture...

- 6 -
Use the hand grip when moving the projector.
Replace the lens cap and retract the adjustable feet to
prevent damage to the lens and cabinet when carrying. 
When the projector is not in use for an extended period, put
it into a suitable case to protect the projector.
CAUTION IN CARRYING OR
TRANSPORTING THE PROJECTOR
–Do not drop or bump the projector, otherwise damages
or malfunctions may result.
–When carrying the projector, use a suitable carrying
case.
–Do not transport the projector by courier...

- 7 -
English
Bottom Back
qFilter
wSpeaker
eLens Release Button
rTop Controls and Indicators
tMaintenance Cover
WARNING: FOR MAINTENANCE USE
ONLY. DO NOT OPEN.
yLens Cap 
(for LC-XG300/XG250)
!7
!4!6!5
!2
!3
CAUTION
Hot air is exhausted from the exhaust vent.
Do not put heat-sensitive objects near this
side.
o
!1Infrared Remote Receiver (Back)
!2Terminals and Connectors
!3Lamp Cover
!4Power Cord Connector
!5Optional Parts Attachment
!6Air Intake Vent
!7Hand Grip
CAUTION
Do not turn on the projector with...

- 8 -
Rear Terminal
qwe
r
t
yiu
tUSB CONNECTOR (Series B)
Use this connector when controlling a computer
with the remote control of the projector. Connect
the USB terminal of your computer to this
connector with the supplied USB cable.
yS-VIDEO INPUT JACK
Connect the S-VIDEO output signal from video
equipment to this jack.
iAUDIO 2 JACK
Connect the audio output (stereo) signal from a
computer or video equipment to this jack.
oAUDIO 1 JACK
Connect the audio output (stereo) signal from a
computer or video...

- 9 -
English
!0R/C JACK
When using the wired remote control, connect the
wired remote control to this jack with a remote
control cable (not supplied).
!2MONITOR OUTPUT TERMINAL (ANALOG)
This terminal outputs the video signal from
computer to external video equipment.
✽RESET button
A built-in micro processor which controls this unit may
occasionally malfunction and need to be reset. This can be
done by pressing the RESET button with a pen, which will
shut down and restart the unit.  Do not use the RESET...

- 10 -
q
w
e
t
u
i
o
wLAMP REPLACE indicator
Lights yellow when the projection lamp reaches its
end of life.
qWARNING TEMP. indicator
Blinks red when the internal temperature of the
projector exceeds the operating range.
eON/STAND-BY button
Turn the projector on or off.
rINPUT button
Select an input source.
!1INFO. button
Display the input source information.
yPOINT ed7 8(VOLUME +/–) buttons
–Select an item or adjust the value in the On-
Screen Menu.
–Pan the image in Digital zoom + mode.
–Adjust the...